HobbyKing
POWERBOX EVOLUTION SPEKTRUM W/SENSORSWITCH
Spektrum has been developed specifically for Spektrum ..." />
As with all PowerBox systems the power supply features redundant control for all functions, i.e. there are two controllers, two switches and two regulators. All commonly used types of battery can be employed: LiPo, LiFePo or NiMH. The LED indicator allows you to monitor the packs’ state of charge at a glance., Operating Voltage:, Power Supply:, Current Drain Power-on State:, Current Drain Standby:, Maximum Load Current:, Drop-out Voltage:, Output Voltage:, Signal Input Seriell:, Channels:, Servo Sockets:, Dimensions:, Weight:, Temperature Range:,
The PowerBox Evolution Spektrum has been developed specifically for Spektrum ...HobbyKing
POWERBOX COMPETITION W/ SENSOR SWITCH (OLED VERSION)
| Supports three battery types | NiMh/NiCd, LiFePo |
| Dropout voltage | approx. 0,25 V |
| Servo signal resolution | 0,5µs |
| Bus systems | Spektrum, Multiplex |
| Temperature range | - 30 °C to + 75 °C |
| Weight | 115 g |
| SensorSwitch | 15 g |
| EMV approval | EN 55014-1 |
| CE approval | 2004/108/EG |
Features:, High resolution graphical OLED screen with 128x64 pixels, Specification:, Operating voltage:, 4,0 Volts to 9,0 Volts, Power source:, 2 x two-cell LiPO batteries 7,4 Volts, Current drain:, Power-on state approx. 130 mA, Max. receiver and servo current:, 2 x 10 A (stabilised), 2 x 20 A (Peak - Dependant on cooling), Signal frame rate:, User variable - 9ms, 12ms, 15ms, 18ms, 21ms, Screen:, OLED 128 x 64 pixels, graphic, Servo sockets:, 18 sockets, 12 channels, 4 of them match-channels, Dimensions:, 110 x 72 x 24 mm (incl. base plate),
The PowerBox Competition is the latest innovation from PowerBox Systems. ...3 Reviews
HobbyKing
POWERBOX COMPETITION SRS W/ SENSOR SWITCH
| • SRS | Serial Receiver System that uses receivers with serial interface |
SRS stands for Serial Receiver System: in contrast to conventional battery backer systems, servo information is transferred using a digital serial signal generated by the receiver. This reduces the number of connections required between the receiver and the PowerBox to a single cable. It is also easy to connect a second receiver to the system, which then assumes control of the model if the first receiver should fail to pick up a signal. In the case of Spektrum and Jeti, only the satellite receivers are connected to the Competition SRS., However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition., Operating voltage:, Power source:, Current drain:, Max. receiver and servo current:, Servo signal resolution:, Signal frame rate:, Screen:, Bus systems:, Servo sockets:, Temperature range:, Dimensions:, Weight:, SensorSwitch:, EMV approval:, CE approval:,
The PowerBox Competition SRS is the first device in an ...