Narrow your results
Price
Refine your search
Sellers
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» FPV

Displaying 15-30 of more than 1000 results
Sort By:
Specification:
Circuit BoardWeight 4 grams (0.15 oz), dimensions 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”)
Pitot TubeWeight 3 grams (0.1 oz), length 80mm (3.2”), diameter 4 mm (0.16”)

The Eagle Tree tiny new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude., Manuals:, eLogger Manual,

Description: This sensor measures airspeed from approximately 2 MPH to 350 MPH. And, it runs completely standalone as a Max display sensor as well as connected to the eLogger! Includes Pitot tube. For standalone mode, simply plug the sensors into a spare receiver channel or small battery (3V to 16V) and ... more details »
Get More Info
Found 3 years, 9 months ago at ngHobbies
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Specification:
Compatible with FrSky two-way telemetry modulesDFT, DJT, DHT, DHT-U
Operating Voltage Range3.5V~10V
Operating Current60mA
Operating RangeFull Range (>1.5km)
Dimension40x22.5x6mm
Weight5.8g

Compatibility:, Features:, • RSSI (PWM) and CPPM output., Specs:, Number of Channels:4,

Description: FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry) • Lighter weight and physically smaller than D8R-II & D6FR • Integrated warning alarm for low voltage, poor reception, etc. • One external analog telemetry port and one digital data-stream port (Connects to FrSky Sensor Hub FSH-01). more details »
Get More Info
Found 4 years, 9 months ago at HobbyKing
Specification:

pecifications:, , Size:, , Weight:, , Input Power:, , Video Input:, , Audio Mic Input:, , Audio Line Input:, , Frequencies(GHz):, , Output Power:, , Antenna:, , Camera Power:, , Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Description: 500MW of Iftron's wide band video clarity and a host of advanced features! Mondo Stinger 5.8 transmits NTSC or PAL/SECAM video, and 2 side channels at 500mw and provides outstanding range in the less polluted 5.8GHz band. The microphone input features extreme sensitivity, yet the built-in Automatic Level Control (ALC) ... more details »
Get More Info
Found 5 years, 4 months ago at ReadyMadeRC
Specification:

When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include*:, , Other options include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for TG9e or HS-65HB servos.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, , Manual:, Sky Sufer Pod Instructions,

Description: A Sky Surfer FPV pod that uses a custom mechanism allowing for full 180 degree (+/- 90 degree) panning without the need for any modifications to a servo or without the need for a servo stretcher. A full 360 degree pan (+/- 180 degrees) is possible with the addition of ... more details »
Get More Info
Found 5 years, 4 months ago at ReadyMadeRC
Specification:
This package includesDragon OSD V2

NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS.  POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO!  AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on.  This will allow users of other connections to easily solder on their own connectors.,

Description: The Dragon OSD+ v2 is the newest analog OSD from DragonLabs. It provides a light and low cost board, but high quality display and a very long list of features. Knowledge is required to assemble and use the OSD, please see the Dragonlabs web page and the RCGroups thread on ... more details »
Get More Info
Found 2 years, 10 months ago at ReadyMadeRC
Specification:
FY-41AP firmware for fix-wing V1.22Download
FY module firmware upgrade software and manualDownload
The latest FY-DOS&41AP-SETTING software V1.11 for fix-wingDownload
FY-41AP manual for fix-wingRead online
More FY-41AP related downloadsClick in
FY-41AP OSD display part firmware V1.22aDownload
FY module firmware upgrade software and manualDownload
Supported servo output50Hz refresh frequency
Recommended TransmitterPCM or 2.4GHz with minimum 6 channels
FY-41AP Module Working Voltage5.3V@0.2A( Powered by Power Manager)
Air speed senor0 ~ 200KM/h
Power Manager35g(50×24×18mm)
Working Voltage RangePower of battery 7~26V (2S ~ 6S)
Measuring current0~100A
Power for FY-41AP module5.3V@2A
Power for Video transmission system12V@2A
Operating Temperature-10°C ~ 50°C

Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of  flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,

Description: Introduction FY-41AP is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts and multi-rotors aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight ... more details »
Get More Info
Found 5 hours, 26 minutes ago at ReadyMadeRC
Specification:

This includes the best quality equipment you can get, but with options!  The default package includes:, , Note: The picture shows the now discontinued Aviator goggles.  The Dominators are now the default option, and the headphones are available separately, Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.  Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,

Description: No more guessing regarding what gear to buy or how to get started. This is everything you need to get started in FPV flying! RMRC-700XV camera FatShark Dominator goggles with 5.8GHz receiver module and battery ImmersionRC 600mW 5.8GHz transmitter Bluebeam Whip antenna set (critical for good performance of a 5.8Ghz ... more details »
Get More Info
Found 3 years, 8 months ago at ReadyMadeRC
Specification:

NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) below is required.,

Description: New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes. Plugs into the eLogger V3 or V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and ... more details »
Get More Info
Found 2 years, 2 months ago at ReadyMadeRC
Specification:
Comes with a mounting plate that will fit many popular FPV cameras includingKX131, KX171, KX191, IF Cam, SN777, SN555 and many others
Instructions to build the pan and tiltComing Soon

Note:, careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include*:, Laser cut components for the main pod, You'll need to supply:, Double sided servo tape to apply TX, camera, and tilt servo., Documentation:,

Description: The Radian FPV pod that uses a custom mechanism allowing for full 180 degree (+/- 90 degree) panning without the need for any modifications to a servo or without the need for a servo stretcher. A full 360 degree pan (+/- 180 degrees) is possible with the addition of an ... more details »
Get More Info
Found 5 years, 4 months ago at ngHobbies
Specification:

Features:, Frequency Band:, 1300Mhz, Number of Channels:, 2, Channels:, 1:1258 MHz, 2:1280 MHz, Video Output:, 75 Ohm, RCA, Power Consumption:, 250mA, Audio Output:, 10k Ohm, RCA, Power Supply:, 12V/500mA, Antenna Connector:, SMA Connector, Weight:, 140 g, Dimensions:, 115 x 80 x 21 mm, Warranty:, 3 months, Note:, Please note this receiver comes without a power supply.,

Description: Highly integrated 2 channel digital display receiver. Compact size. Manual up-down channel switcher. This unit requires external power supply or battery to operate. (Not included) Operation Voltage DC 12V Standard NTSC/PAL more details »
Get More Info
Found 3 years, 10 months ago at ngHobbies
Description: The new v1.6 CEOSD, 100A current sensor, support ChainLinkDare Rx now We noted serveral customers talked about there may be wrong for the CEOSD v1.6 and Nova OSD's mAh consuming readings.So we do the test for both the CEOSD, according to the test, there is totally no problem for CEOSD, ... more details »
Get More Info
Found 5 years, 3 months ago at BevRC
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Specification:
Camera TypeColour PAL
Scanning System (H)PAL 15.625Khz
Scanning System (V)PAL 50Hz
Pic Elements752(H) x 582(V)
Resolution600TV Lines
Min Illumination0.1 Lux / F2.0
White BalAuto (2,400k~8000k)
Lens3.6mm
Dimensions34x34mm
Weight34.2g
VoltageDC5v~15V
Power130mA

Specs:, Pick Up Device:, 1/3" Sony Super HAD CCD*,

Description: The Turnigy Micro FPV Camera uses the same high quality components and optics as our other leading brand FPV cameras. Now available in super sharp 600TVL resolution these cameras offer one of the most vivid FPV flying experiences available today. Optional 2.1mm, 2.5mm and 2.8mm Lenses are sold separately, see ... more details »
Get More Info
Found 4 years, 9 months ago at HobbyKing
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Description: This simple ply wood FPV Camera mount is easy to assemble and install. The flat bed allows for multiple types of cameras and/or pan & tilt setups to be mounted along with your FPV transmitter of choice. Create your own plug and go FPV setup that drops right in to ... more details »
Get More Info
Found 4 years, 9 months ago at HobbyKing
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Specification:
Dimensions85x74x23mm
Weight118g
Sale Price$199.99 with Free shipping, limited time only!

Features:, • Reliable FHSS Link (Frequency Hopping, Spread Spectrum), Specs:, Power Requirements:, 9~12V DC 250 mA @ 12V in 600mW mode, 85mA @ 12V in 200mW mode,

Description: The Immersion EzUHF Transmitter offers reliable long-range FPV/UAV model control with an output of up to 600mW. Over one year of development, testing and refinement was invested in the EzUHF line of products. Robust FHSS link The robust FHSS (Frequency Hopping, Spread Spectrum) link hops to a new frequency every ... more details »
Get More Info
Found 4 years, 9 months ago at HobbyKing
Specification:
Power Requirements4.8v - 6v, 33mA

Specifications:, , Includes:,

Description: Featherweight Long-Range R/C receiver Ideal companion to the EzUHF transmitter. Single-board design, weight only 8g. Sensitive receiver, range comparable to its 8 channel big-brother. Ideal for long-range flights, with lightweight foam models, without any safety risk. Reliable FHSS Link (Frequency Hopping, Spread Spectrum) 433MHz/70cm Ham band operation -113dBm Sensitivity Ceramic ... more details »
Get More Info
Found 7 months, 1 week ago at ReadyMadeRC
Query took 0.035s