Narrow your results
Refine your search
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!


Displaying 30-45 of more than 1000 results
Sort By:
Operating VoltageDC 5V DC
Power Consumption240mA
Dimensions110 x 70 x 20 mm
Antenna ConnectionSMA

Includes:, Pro Lawmate 2.4GHz receiver, Frequencies:, , For channel selection:  All switches should be in the "up" position except for the switch number that matches channel you are using.  The A/B switch should be on A for channels 1-4, and B for channels 5-8.,

Description: Pro Lawmate 2.4GHz Receiver with built in battery, power cord. High quality and excellent reception. 2.4GHz antenna A/V Cable with male RCA connectors. If you need female connectors to plug in to goggles or other devices, you can use these adapters. 3.7V 2200mAh Lithium Ion Battery (~3.5 hour run time) ... more details »
Get More Info
Found 4 years, 11 months ago at ReadyMadeRC
Description: Penguin 40A ESC with 5V 3A BEC. For use with 2-3s lipo if using built in BEC. more details »
Get More Info
Found 2 months, 3 weeks ago at ReadyMadeRC
Sensitivity-102dBm (old specs!)
Input voltage range4-10V
Servo signal pulse output3.3V positive
Radio band433 & 444Mhz multi band and multi frequency hopping system.
Temperature range-40C to +70C tested
Description: Introducing the new Normal Range Mikrokopter receiver. Designed to match the MK mounting laying, it includes a direct ppm output for the mikrokopter, in addition to channels 5,6,7, and 8 for direct connection of your accessories. Wire antenna mounted directly on the rx. PPM out is the same as sum-signal ... more details »
Get More Info
Found 1 year, 9 months ago at ReadyMadeRC

Features:, Frequency Band:, 2400MHz, Number of Channels:, 8, Audio Sub-carrier:, 6.5MHz, Video Output:, 75 Ohm, RCA, Power Consumption:, 240mA, Audio Output:, 10k Ohm, RCA, Power Supply:, 12V/500mA, Antenna Connector:, SMA Connector, Weight:, 95 g, Dimensions:, 80 x 53 x 20 mm, Power Cable:, A power cable to supply power to this recevier from a 3Cell LiPo battery can be found here:, 6" LawMate Power Cable, Documentation:, , Warranty:, 6 months, Note:, Please note this receiver comes without a power supply.,

Description: Highly integrated mini 2.4 GHz receiver with well known quality and reliability from LawMate Technology. Compact size, stylish Mag-Aluminium Alloy body. Auto/Manual channel switcher. This unit requires external power supply or battery to operate. (Not included) Operation Voltage DC 12V Standard NTSC/PAL Datasheet more details »
Get More Info
Found 4 years ago at ngHobbies
Description: This is a replacement cable for the new CCDKiller camera. This cable is plug and play with the ImmersionRC and Fatshark transmitters on 2.4 or 5.8Ghz. more details »
Get More Info
Found 4 years, 11 months ago at ngHobbies

Your purchase include:, 1* 4600mAh lipo,

Description: The same color as the 7-inch and 8-inch monitor, plug and play lipo basement kit. Offer 7-8 hours working time for monitors, fully fit the 7-inch and 8-inch monitors. You can use the same power adptor of the monitor to charge the lipo. 1* power cable 1* basement more details »
Get More Info
Found 4 years, 11 months ago at BevRC
Warranty3 months

0.9G TX Series:, ,

Description: If you are using a 2.4G radio, or you fly with some 2.4G radio gears, don't forget to add a low pass filter to your 0.9G/1.3G vidoe transmitters to cut down the h armonic interference. 0.9G 800mW Wireless AV transmitter Model 800 Working Voltage DC 12V Working Ctrrent 260mA Channel ... more details »
Get More Info
Found 4 years, 11 months ago at BevRC
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
CCD sensor type1/3 color SONY CCD
Scanning systemInterlaced scanning
Horizontal resolution420TV line
S/N Ratio48dB
Gamma Modification0.45
White balanceAuto
Auto backlight compensationAuto
Input voltage9~12.6V
Electronic Shutter1/50 (60) ~ 1/100,000s
Video output1.0VP-P composite video
Operation Temp.-20~50
Flight timeApprox 60min/100mah 3S
Channel8-Ch, AV synchronization
Input voltage12V
Frequency0.9G 0.910G,0.980G,1.010G,1.040G

Audio: No,

Description: 12 Channel 900Mhz Tx/Rx video system with CCD camera. A high-power tx system for long range, clear video. Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage. If you ... more details »
Get More Info
Found 4 years, 4 months ago at HobbyKing
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Weight19g incl. battery
Video720x480 pixel
Battery200mAh Lipo
FPS30 (True Rating)
Camera lens2-million CMOS
Angle of view72 degree
Audio formatWave
Minimum illumination1LUX
Continuous video recording time40min/2GB
Power consumption150mA/3.7V (max.)
Storage temp.-10~70C
Operating temp.-10~60C
USB interfaceUSB1.1/2.0
Operating system2000/XP/Vista 32
Storage consumption1.83GB/35min
Charge periodAbout 2 hours
Included accessoriesTurnigy 800 camera

:, Ultra-small size alloy housing, Specification:, Voice-activated standby time:, 250 hours standby time, Type of memory card:, Micro SD card/TF card (Not included), Capacity of memory card:, Can support upto 16GB (max.), Player software:, Media player / KM player,

Description: Requires a Fast spec SD memory for smooth high rate video recording.(Sold separately) Unlike similar camera's sold elsewhere, our Ultra-Mini DigiCam gives smooth jitter free recording if a SanDisk fast spec memory is used. WARNING. Always be sure that your camera includes a fast spec memory card. Cheap memory cards ... more details »
Get More Info
Found 4 years, 4 months ago at HobbyKing
Description: 1024 XEN 2.1mm Lens for Board Camera Model Number: XEN-AVLENS-4 2.1mm lens for all board camera more details »
Get More Info
Found 4 years, 11 months ago at LowPriceRC
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
CompatibilityFrSky DFT, DJT and DHT
BladeBlade Number
Volt ratioA1 & A2 Voltage Division Ratio
Unit SetSpeed (m/s or MPH)
Alarm SetA1_1/2, A2_1/2, RSSI_1/2

Features:, 1) Show all connected sensors data;, Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF., Screen structures:, Main Screen:, FrSky Logo, Menu Screen:, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., Data Screen:, Screen-1:, GMT (H/M/S), Screen-2:, Altitude, Screen-3:, Total Voltage, Note:, Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2., Screen-4:, Acceleration X/Y/Z, *Note:, Please see "Files" tab for user manual.,

Description: FrSky FLD-02 Telemetry Display Screen 2) Capable of programming alarm thresholds and directions; 3) Firmware upgradable. Version Number Data Screen Menu Screen FrSky Website Temperature (Celsius or Fahrenheit) Altitude (M/Foot) The alarm thresholds and directions (either above or below threshold) can be programmed. After alarm thresholds and directions are programmed, ... more details »
Get More Info
Found 4 years, 4 months ago at HobbyKing
★ ★ ★ ★ ★ Rating: 5 - 5 reviews
Measurement range1~6S lipoly
Cell voltage display range0.20~4.20V
Voltage display resolution0.01V
Voltage detection precision0.05V
Current of the board15.5mA
Operating temperature range-30°C~70°C

Specs:, Pixel:, 128x64 with OLED display screen,

Description: The FrSky Lipo Voltage Sensor features a colorful, easy to read OLED display screen. It can be used as a stand-alone unit for checking the voltage of your lipoly cells, or can be used in conjunction with the FrSky DHT-U telemetry display system as an add-on sensor to monitor your ... more details »
Get More Info
Found 4 years, 4 months ago at HobbyKing
★ ★ ★ ☆ ☆ Rating: 3 - 3 reviews
Camera TypeColour NTSC
Pic Elements976(H) x 494(V)
Resolution700TV Lines
Min Illumination0.1 Lux / F1.2

Specs:, Pick Up Device:, 1/3" Sony EXviewHAD CCDII*, White Bal:, Auto/preset/indoor/outdoor/fluorecent (Requires optional OSD Cable),

Description: The Turnigy Micro FPV Camera uses the same quality components and optics as our other leading brand FPV cameras. Now available in super sharp 700TVL resolution these cameras offer one of the most vivid FPV flying experiences available today. Optional 2.1mm, 2.5mm and 2.8mm Lenses and OSD Programming cable are ... more details »
Get More Info
Found 4 years, 4 months ago at HobbyKing

Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,

Description: Channel 1 5.740GHz Channel 2 5.760 GHz Channel 3 5.780 GHz Channel 4 5.800 GHz Channel 5 5.820 GHz Channel 6 5.840 GHz Channel 7 5.860 GHz more details »
Get More Info
Found 10 months, 3 weeks ago at ReadyMadeRC

Includes:, , Video describing how to connect to a JR radio if you want to make your own cable:, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Description: This combo gets you all you need to have a full EZUHF system! The default option plugs right in to a Futaba style trainer port, and there's also an option for the JR/Spektrum style trainer adapter (external battery required). EZUHF Transmitter with standard whip antenna and Futaba trainer adapter EZUHF ... more details »
Get More Info
Found 11 months, 2 weeks ago at ReadyMadeRC
Query took 0.066s