HobbyKing
FRSKY FLD-02 TELEMETRY DISPLAY SCREEN
| Specifications | Model |
| Compatibility | FrSky DFT, DJT and DHT |
| Dimension | 55*40*12mm |
| Pixel | 128*64 |
| Blade | Blade Number |
| Volt ratio | A1 & A2 Voltage Division Ratio |
| Unit Set | Speed (m/s or MPH) |
| Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
Features:, 1) Show all connected sensors data;, Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF., Screen structures:, Main Screen:, FrSky Logo, Menu Screen:, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., Data Screen:, Screen-1:, GMT (H/M/S), Screen-2:, Altitude, Screen-3:, Total Voltage, Note:, Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2., Screen-4:, Acceleration X/Y/Z, *Note:, Please see "Files" tab for user manual.,
FrSky FLD-02 Telemetry Display Screen 2) Capable of programming alarm ...5 Reviews
HobbyKing
IMMERSIONRC EZOSD FPV ON SCREEN DISPLAY
| - After-flight debriefing, shows a summary of the flight | Max. altitude, max. distance, max. speed, average speed, distance flown, etc. |
5 Reviews
HobbyKing
HOBBYKING OSD SYSTEM (BASIC COMBO)
| Hobbyking OSD System (Basic Combo) | Main Board, Power Module, USB Module and connecting wires. |
| OSD Display Features (w/addition of optional sensors *sold separately) | Timer |
:, "If more than 10KM/H or equivalent in MPH speed is measured by the GPS for not less, Weight:, Main board - 17g / Power module - 23g / USB Module - 10g, Dimensions:, Main board - 60x18x34mm / Power module - 57x13x31mm / USB Module - 45x9x16mm,
The HobbyKing OSD Combo is a quick and easy way ...3 Reviews
HobbyKing
TURNIGY MICRO FPV CAMERA 700TVL (NTSC)
| Camera Type | Colour NTSC |
| Pic Elements | 976(H) x 494(V) |
| Resolution | 700TV Lines |
| Min Illumination | 0.1 Lux / F1.2 |
| Lens | 3.6mm |
| Dimensions | 34x34mm |
| Weight | 35g |
| Voltage | DC5v~15V |
| Power | 150mA |
Specs:, Pick Up Device:, 1/3" Sony EXviewHAD CCDII*, White Bal:, Auto/preset/indoor/outdoor/fluorecent (Requires optional OSD Cable),
The Turnigy Micro FPV Camera uses the same quality components ...3 Reviews
HobbyKing
FPV 12DBI 5.8GHZ ANTENNA
| Length | 275 mm |
| Gain | 12 dBi |
Specs:, Connector:, SMA/FME,
Extend the range of your FPV system with this high-gain ...5 Reviews
RCTimer
CM102 2-AXIS CARBON FIBER CAMERA GIMBAL MOUNT
| Product | CM102-DS 2-axis Camera Gimbal Frame |
| Material | Carbon Fiber ( thickness 1.2mm) |
| Weight | 75g (2pcs Servos not included) |
| Weight | 103g (2pcs Servos included) |
| The Depth of Inner Frame | 68mm |
| Dimension | 170mm(Width) x 158mm(Depth) x 110mm Height) |
| Rolling angle | 60 degree |
| Pitch angle | 80 degree |
| Max load | <500g |
| Brand | RCTIMER |
| Model | 9025MG |
| Speed | 0.09s/60 @ 6.0V |
| Torque | 2.5kg/cm @ 6.0V |
| Working voltage | 4.8V-6.0V |
| Gear type | Full Metal gear |
| Dimension | 23mm x 12.1mm x 28.8mm |
| Weight | 13g |
Product introduction:, CM102-DS Camera Gimbal is 2-axis(rolling axis and pitching axis) special designed for FPV fans. CM102-DS Camera Gimbal could install on normal helicopter, such as XAircraft X650V4/V8 X450P DIY-Hexa Sigma Q4-480W Y6-500FG and most of other DIY frame., CM102-DS Camera Gimbal provide 2-axis control functions: Rolling and pitching. The gimbal comes with 2 special smoothly digital servos(RCTIMER 9025MG),it could direct drive by reciever. For the auto stabilization function, it,
Carbon fiber Camera Mount Free two Servos! This is special ...ReadyMadeRC
IFTRON - NANO 5.8GHZ MODULAR RECEIVER
,
Great video for less! You don’t have to lose out ...ReadyMadeRC
2.4GHZ 8CH WIRELESS A/V RECEIVER
| https | //www.facebook.com/ReadyMadeRC/posts/525054860857769 |
| Operating Voltage | DC 12V |
| Power Consumption | 240mA |
| Dimensions | 80 x 63 x 20mm |
| Weight | 95g |
| Antenna Connection | SMA |
Please see this important announcement regarding Lawmate equipment:, Includes:, Standard Lawmate 2.4GHz receiver, Frequencies:, , For channel selection: All switches should be in the "up" position except for the switch number that matches channel you are using. The A/B switch should be on A for channels 1-4, and B for channels 5-8.,
Standard Lawmate 2.4GHz Receiver. High quality and excellent reception. 2.4GHz ...ReadyMadeRC
RADIAN FPV PAN/TILT POD KIT
| Manual | HERE |
When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required. The system was designed for HXT900/TG9e servos. Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,
A Parkzone Radian and Radian Pro FPV pod that uses ...ReadyMadeRC
5V REGULATOR WITH A/V PASS-THROUGH 6-17V INPUT
| Input Voltage Range | 6-17VDC |
| Output Voltage | 5V 500mA Max |
| Size | 38mm x 17mm x 10mm |
Specs:, , Weight: 4g,
This custom Ready Made RC, LLC power adapter can help ...ReadyMadeRC
FAT SHARK DOMINATOR AND PREDATOR REPLACEMENT EYE CUPS (SET)
,
One set of replacement rubber eye cups for the FatShark ...ReadyMadeRC
FAT SHARK DOMINATOR HEAD TRACKER MODULE
,
Head tracker module for the FatShark Dominator video glasses. When ...ReadyMadeRC
DRAGONOSD+ V2 COMBO: OSD, CURRENT SENSOR, AND GPS
| This package includes | Dragon OSD V2 |
NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS. POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO! AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on. This will allow users of other connections to easily solder on their own connectors.,
The Dragon OSD+ v2 is the newest analog OSD from ...