ReadyMadeRC
VAS - 1.3 GHZ AIR-BLADE ANTENNA SET (LHCP)
blade LHCP antenna from Video Aerial Systems! 2x ..." />
Connector type | SMA male |
Whip length | 2″/5cm |
Contains:, , Specifications:, ,
1.3 GHz Airblade LHCP antenna from Video Aerial Systems! 2x ...ReadyMadeRC
VAS - 5.8 GHZ AIR-BLADE ANTENNA SET (LHCP)
blade LHCP antenna from Video Aerial Systems! 2x ..." />
Max speeds without significant deflection | 150 mph |
Connector type | SMA male |
Whip length | 2″/5cm |
Contains:, , Specifications:, ,
5.8 GHz Airblade LHCP antenna from Video Aerial Systems! 2x ...ReadyMadeRC
VAS - 2.4 GHZ BLUEBEAM AIR-BLADE ANTENNA SET (LHCP)
blade LHCP antenna from Video Aerial Systems! 2x ..." />
Connector type | SMA male |
Whip length | 2″/5cm |
Contains:, , Specifications:, ,
2.4 GHz Airblade LHCP antenna from Video Aerial Systems! 2x ...HobbyKing
FRSKY FLD-02 TELEMETRY DISPLAY SCREEN
Specifications | Model |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 55*40*12mm |
Pixel | 128*64 |
Blade | Blade Number |
Volt ratio | A1 & A2 Voltage Division Ratio |
Unit Set | Speed (m/s or MPH) |
Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
Features:, 1) Show all connected sensors data;, Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF., Screen structures:, Main Screen:, FrSky Logo, Menu Screen:, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., Data Screen:, Screen-1:, GMT (H/M/S), Screen-2:, Altitude, Screen-3:, Total Voltage, Note:, Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2., Screen-4:, Acceleration X/Y/Z, *Note:, Please see "Files" tab for user manual.,
FrSky FLD-02 Telemetry Display Screen 2) Capable of programming alarm ...5 Reviews
ReadyMadeRC
DJI FLAME WHEEL F550 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
MSRP | $126 F550 User Manual v1.0: |
Stator size | 22x12mm |
Current | 30A OPTO |
Signal Frequency | 30Hz ~ 450Hz |
Battery | 3S ~ 4S LiPo |
Dimensions | 10 x 4.5 in; 8 x 4.5 in |
Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 6× ESC(30A), 6× Motor(2212), 6× blades(10inch), 1× complete frame, Flame Wheel F550 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F550 ARF Kit set $390 FlameWheel series is ...ngHobbies
4 PIN MOLEX CONNECTOR
Pitch | 1.25mm |
Type | Pico blade |
Contacts: 4,
This is a pair of 4 pin molex replacement connector ...ngHobbies
3 PIN MOLEX CONNECTOR
Pitch | 1.25mm |
Type | Pico blade |
Contacts: 3,
This is a pair of 3 pin molex replacement connector ...BevRC
FRSKY LCD DISPLAY
Model | FLD-02 |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 55*40*12mm |
Pixel | 128*64 |
Model | FLD-02 |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 55*40*12mm |
Pixel | 128*64 |
Blade | Blade Number |
Volt ratio | A1 & A2 Voltage Division Ratio |
Unit Set | Speed (m/s or MPH) |
Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
1.1 Specifications:, 1.2 Features:, 1) Show all connected sensors data;, 2. Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF, 3 Screen structures:, 3.1 Main Screen, Note: Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., :, , Note: Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2.,
Product Show FLD-02 Category:Accessories 1.Introduction 2) Capable of programming alarm ...ReadyMadeRC
SUPER SKY SURFER 2000 KIT
Material | EPO |
Wingspan | 2000mm(78.74inch) |
Flying Weight | 1500g(53oz) |
Motor | 3536 1000KV Brushless (sold separately) |
Servos | 4*17g servos (sold separately) |
Propeller | 9x4(Three blade) |
Battery | 11.1V ,3S 2200mAh-3300mAh recommended (sold separately) |
Technical Details:, , Includes:, , Requires:,
Another great option for RC and FPV flight! The Super ...ReadyMadeRC
BOBCAT 6 CHANNEL 1.14M WINGSPAN PUSHER (PNP)
Material | EPO |
Wingspan | 1143mm(45inch) |
Flying Weight | 1400g(49.5oz) |
WingArea | 31d㎡(480in2) |
Wingload | 50g/d㎡(16oz/sq.ft) |
Drive System | 3648 KV1250 motor |
Servos Required | 7*9g servos |
Propeller | 7*6 3 Blade Custom |
Battery Recomended | 14.8V,2700-3300mAh Li-polymer |
Control system | Minimum 6 CH |
*Special note from RMRC: This plane flies great, but we have seen some issues with the power system and included hardware, which is why we have discounted the plane. The user should replace the wires between the motor/esc with thicker gauge wire (we recommend 12AWG) and double check the soldering on the bullet connectors, and also should cut open a hole beside the ESC for additional cooling. The best option would be to supply your own 80A ESC based on the results we've seen with the inclulded ESC's Double/triple check all hardware, servo wires, etc. We are pricing this at near the kit price and losing money on these since we are not particularly happy with the included electronics, but once you get it in the air we think you'll be happy with how it flies. We have no idea how other stores can justify charging $300 for the same plane., Some special instructions for this plane:, ,
Bobcat jet-style kit with integrated LED's and retracts included! High ...ReadyMadeRC
SUPER SKY SURFER 2000 PNP
Material | EPO |
Wingspan | 2000mm(78.74inch) |
Flying Weight | 1500g(53oz) |
Motor | 3536 1000KV Brushless |
Servos | 4*17g servos |
Propeller | 9x4(Three blade) |
Battery | 11.1V ,3S 2200mAh-3300mAh recommended (not included) |
Technical Details:, , Includes:, , Requires:,
Another great option for RC and FPV flight! The Super ...HobbyKing
WALKERA QR X350 GPS QUADCOPTER WITH RETURN TO HOME FUNCTION AND DEVO 7 (MODE 2) (RTF)
Main Rotor Diameter | 556mm |
Main Rotor Blade Length | 206mm |
Main Motor Size | WK-WS-28-008A |
Length | 289mm |
Width | 289mm |
Height | 180mm |
Flying Weight | <1000g |
Approximate Flight Time | 10-15 minutes |
Number of Channels | 5 channel up |
Rotor Type | Quad-Copter |
Experience Level | Intermediate |
Completion Level | RTF |
Recommended Environment | Indoor & Outdoor |
*Note:, This is the new version with the USB port on the flight controller for future updatability, a separate Walkera USB adapter (UP02) will be required for connection to your PC., Features:, • Completely Ready to Fly, Specs:, Battery:, 11.1V 2200mAh 25C LiPo, Includes:, Walkera QR X350 Ready to Fly Quad-Copter, Required:, 8 x AA batteries for transmitter, *Note:, The QR X350 uses 3.5mm bullet connectors for the battery plug, please see the accessories tab below for the battery adapter to XT-60. This allows you to use our Turnigy batteries with the QR X350., *MAP pricing notice for EU customers:, MAP pricing for EU customers is €399.98. This price will be applied automatically during the checkout process for all EU customers.,
The Walkera QR X350 Quad-Copter is the new "People's Multi-Rotor", ...ngHobbies
FATSHARK GOPRO HOLDER
This new mount is designed to hold the GoPro 3 and GoPor 3+ while also having a mount for a separate FPV camera attached to the system. The camera illustrated on the picture is this:, 600 Line Fatshark CMOS, This mount is compatible with the following quads:, Blade 350QX from Horizon Hobby,
Camera (not included). The second picture also illustrates a 5.8Ghz ...HobbyKing
JR TLS1-ROT TELEMETRY ROTATION SENSOR FOR XG SERIES 2.4GHZ DMSS TRANSMITTERS
Detection Range | 300rpm~40,000rpm |
Magnet Dimensions | 4mm x 2mm |
Operating Voltage | 4.0V~8.5V |
Includes | TLS1-ROT Sensor |
Specs:, Detection Method:, Magnetic detection system,
The JR TLS1-ROT Telemetry Rotation Sensor can provide you with ...ReadyMadeRC
GRAUPNER E-PROP 11"X5"
blade ..." />
Diameter / Pitch | 28/12,5 cm |
Diameter / Pitch (Inch) | 11/5 " |
Diameter / Hub bore | 8 mm |