Narrow your results
Price
Refine your search
Sellers
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» FatShark

Displaying 0-15 of 450 results
Sort By:
Specification:
BrownGround
RedVideo
Orangeaudio left
Yellowaudio right

The wire colors on this cable do not match the rest of my standard wiring.  If you need to hook this up to something other than ImmersionRC or FatShark equipment, here are the color codes for the wiring:,

Description: An audio/video cable for the GoProHD Camera (Hero and Hero2, Not compatible with the Hero3 cameras OR Fatshark FCC approved vtx type). On one side, the angled 2.5mm 4 conductor connector, on the other side a connector compatible with ImmersionRC transmitters for video and stereo audio. A total length of ... more details »
Get More Info
Found 1 year ago at ReadyMadeRC
Specification:

Includes 3 sets diopter lenses that will fit in the new FatShark goggles to help correct for myopic (near sighted) vision.  Includes -2, -4, and-6 lenses.  Allows users that normally wear glasses to see far away to use the FatShark goggles.  Note: people that only need reading glasses typically do not need any lens correction for the goggles since the "virtual" image appears to be some distance away.,

Description: Compatible with FatShark Attitude, Dominator, Predator, and BASE goggles. more details »
Get More Info
Found 4 years, 8 months ago at ReadyMadeRC
Specification:

Details:, This is the newest Fatshark 5.8 GHz, Features:, NexWaveRF NWM662JRX, Channels:, , Note:, One of the receiver's pins should not be used that's is not available (blank).,

Description: NexWaveRF receiver module for Fatshark Dominator, which is specially designed for FatShark, ImmersionRC transmitters. Easy to install, just plug and play it, making your Dominator ready to receive video signal from the transmitter directtly to the Video glasses (goggle). Sensitivity -90 dBi High Pass Filtered 5740 MHz 5760 MHz 5780 ... more details »
Get More Info
Found 4 years, 8 months ago at HobbyWireless
Specification:
- Futabain general Futaba 7 series radios and above support the HT
Unsupported radios- Hitec Aurora9

Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,

Description: Thanks to the modular feature of Dominator video glasses, this module can be easily installed or removed any time from the video glasses. The head function control the camera pan/tilt function remotely through RC transmitter trainer port connection. (Futaba Radios only) It has the highest accuracy and fastest speed than ... more details »
Get More Info
Found 4 years, 8 months ago at HobbyWireless
Specification:

Details:, This cable allows easy connection between your GoPro camera and your fatshark/immersionRc transmitter, carring left and right audio and video signal.,

Description: - Approximately 8" inches (22 cm) long plug and play cable for GoPro cameras. - Enables you to plug your GoPro camera directly to your ImmersionRC/Fatshark transmitter and EzOSD, (video and stereo audio). - High quality Molex connector type with secure latch. more details »
Get More Info
Found 4 years, 8 months ago at HobbyWireless
Specification:
YellowVideo
WhiteAudio Left
RedAudio Right

This is a replacement AV cable for Fatshark goggles. The 3.5mm 4 pin jack plugs into the Fatshark goggles and the RCA ends to their respective connection:, Compatible with:, Fatshark Dominator,

Description: Attitude SD (Not the Attitude Base) Fatshark Predator V2 Fatshark Teleporter more details »
Get More Info
Found 4 years, 4 months ago at ngHobbies
Specification:
http//www.youtube.com/watch?feature=player_embedded&v=XYhd_I5AB5E

from Fatshark. This module can be purchased to replace the head-tracking module in your existing goggles. It is compatible with:, - MIG head-tracker (Replacement is easy but requires carefully opening the MIG casing), Watch the video below for performance:,

Description: This is the new final production version of the new and amazing Trinity Headtracker module - Dominator Goggles - Attitude SD Edition Replacement requires opening the goggles, MIG head-tracker box, etc. Please note that should be done by an authorized Fatshark Service center. Your warranty might be void if you ... more details »
Get More Info
Found 3 years ago at ngHobbies
Specification:

Includes 3 sets of diopter lenses that will fit in the new FatShark goggles to help correct for myopic (near sighted) vision.  Includes -2, -4, and-6 lenses.  Allows users that normally wear glasses to see far away to use the FatShark goggles.  Note: people that only need reading glasses typically do not need any lens correction for the goggles since the "virtual" image appears to be some distance away.,

Description: Details Compatible with FatShark Attitude, Dominator, Predator, and BASE goggles. more details »
Get More Info
Found 4 years, 4 months ago at GetFPV
Specification:
YellowVideo
WhiteAudio Left
RedAudio Right

This is a 1.2 meter AV cable for Fatshark goggles. The 3.5mm 4 pin jack plugs into the Fatshark goggles and the RCA ends to their respective connection:, Compatible with:, Fatshark Dominator,

Description: Attitude SD (Not the Attitude Base) Fatshark Predator V2 Fatshark Teleporter more details »
Get More Info
Found 3 years, 3 months ago at ngHobbies
Specification:

This new mount is designed to hold the GoPro 3 and GoPor 3+ while also having a mount for a separate FPV camera attached to the system. The camera illustrated on the picture is this:, 600 Line Fatshark CMOS, This mount is compatible with the following quads:, Blade 350QX from Horizon Hobby,

Description: Camera (not included). The second picture also illustrates a 5.8Ghz transmitter from Fatshark which is FCC approved and does not require a HAM license. Phantom from DJI more details »
Get More Info
Found 3 years, 3 months ago at ngHobbies
Specification:
http//www.fatshark.com/uploads/pdf/1722-1.pdf
FOV (field of view)32 degrees diagonal
Interpupillary (IPD) distance57 to 73 mm (adjustable)
Power supply7 - 13 V (2S/3S supply)
Weight181g
Record rate6Mbps

Optics:, Audio:, Stereo, User Controls:, Channel selection, Electrical:, Power consumption (@7.4V nominal):, 350mA wireless mode, RF Modules (optional):, 43 channel support on 6 bands (1G3, 2G4, 4 x 5G8), Mechanical:, DVR:, MicroSD support to 32Gb, HDMI:, Supports 720x480, Battery:, 1000mAh, 7.4V lithium polymer,

Description: USER MANUA: Specifications Plastic optics (binocular 6p direct view optical engine) Volume control Mode selection (wired/wireless) Contrast/ brightness control DVR control HT control 200mA direct mode (no RX) Display 600 X 480 VGA (922k pixels) stripe pattern LCD NTCS/PAL auto selecting Head Tracker Modular (sold separately) MJPG compression, 30 fps, ... more details »
Get More Info
Found 3 years, 2 months ago at BevRC
Specification:
http//www.fatshark.com/uploads/pdf/1745-1.pdf
Power supply3.5-5V (powered off TX)
Power consumption60mA @5V)
Square21 X 21 X 12mm
Lens extrude15mm X 14mm diameter
Weight15g
Dimensionsbag 50 x 70 mm
Weight(approximately 16g)
Dimensions101 x 68 x 44 mm
Weight60g

Electrical:, Imager:, 1/3” CMOS, Lens:, 2.8mm IR coated, Operation:, -20 to 70C, Mechanical:, Pan/Tilt and Pan/Tilt/Roll version:, Electrical:, Same as above, Imager:, Same as above, Lens:, 3.6mm IR coated, Operation:, Same as above,

Description: Manual: Fixed version (no pan/tilt) FPV tuned light handling NTSC or PAL (selectable; jumper on = PAL). 100 ° diagonal FOV (ideal for fixed camera) Packaging 90 ° diagonal FOV (ideal for pan/tilt camera) Packaging more details »
Get More Info
Found 3 years, 2 months ago at BevRC
Specification:
http//www.fatshark.com/uploads/pdf/1743-1.pdf
• Power5V (powered off TX)
• Power consumption250mA @5V
• Lens extrude from case12mm x 14mm diameter
• Weight33g (11g uncased)

Camera board:, • 1/2.5” 5MP digital CMOS imager, Lens:, , Mechanical:, • Metal cased, square (27 X 25 X 23mm), : 101 x 66 x 46 mm,

Description: Manual: • 720p (1280x720), 30 fps, 15Mbps • AVI file, MJPG compression • MicroSD support to 32Gb card • NTSC analog live out • 3.6mm IR coated • 120°diagonal FOV (ideal for fixed camera) Package box more details »
Get More Info
Found 3 years, 2 months ago at BevRC
Specification:
http//www.fatshark.com/uploads/pdf/1743-1.pdf
• Power5V (powered off TX)
• Power consumption250mA @5V
• Lens extrude from case12mm x 14mm diameter
• Weight33g (11g uncased)

Camera board:, • 1/2.5” 5MP digital CMOS imager, Lens:, , Mechanical:, • Metal cased, square (27 X 25 X 23mm), : 101 x 66 x 46 mm,

Description: Manual: • 720p (1280x720), 30 fps, 15Mbps • AVI file, MJPG compression • MicroSD support to 32Gb card • NTSC analog live out • 3.6mm IR coated • 120°diagonal FOV (ideal for fixed camera) Package box more details »
Get More Info
Found 3 years, 2 months ago at BevRC
Specification:
http//www.fatshark.com/uploads/pdf/1748-1.pdf
Description: Manual: Trinity is the epic result of pairing an accurate 9DFO IMU with a revolutionary new vector algorithm that anticipates and maps real head motion in free space. Trinity delivers the smoothest and most accurate 3 axis head tracker ever; it’s impossible to even imagine what could be improved as ... more details »
Get More Info
Found 3 years, 2 months ago at BevRC
Query took 0.204s