Narrow your results
Price
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» Other

Displaying 0-15 of more than 1000 results
Sort By:
Specification:

, Vehicle, Length:, 8.25 inches (210mm), Width:, 5.6 inches (142mm), Weight:, 19.82oz (562g) with body, Weight:, 13.4oz (380g) rolling chassis only, Wheelbase:, 6.12 inches (155mm), Gear Ratio:, 2.5:1, Track:, 5.6 inches (142mm), Tread:, 4.65 inches (118mm), Body, Length:, 10-5/16 inches (270mm), Width:, 5.50 inches (140mm), Height:, 3.75 inches (96mm), Power Source:, Electric, Terrain:, On-Road, Body Style:, Touring Car, Scale Size:, 1:18 Scale, Assembly Level:, Ready-To-Run, Gear Ratio:, 2.0:1, Drive:, 4WD, Note:, This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger., ,

Description: This is the Team Associated 1/18 scale 18R Niteline RTR. With the ability to transition from on-road to off-road at will, the 18R Niteline RTR brings a new set of racing possibilities. It hugs the road, handles the dirt, and is, to say the least, incredibly fun to drive! Features: ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Wingspan:, 53.1" (1350mm), Flying Weight:, 6.1lbs (2780g), Length:, 53.9" (1380mm), Airfoil:, Fully-symmetrical, mid wing, Center of Gravity:, 4.1" (105mm) Back from the wing's leading edge at the fuselage sides., Control Throws, Ailerons:, Up & Down 0.40" (10mm), Elevator:, Up & Down 0.59" (15mm), Rudder:, Right & Left 1.19" (30mm), ,

Description: This is the Phoenix Models Giles 202 .46 GP/EP ARF Aerobatic Airplane. The Phoenix Models Giles is recommended for pilots that have had trainer airplane experience. Features: Made of built-up balsa and plywood Pre-applied Oracover covering Color scheme is mostly White on the fuselage and wings with Red, Yellow, and ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Outer Diameter:, 56mm (2.2"), Inner Diameter:, 76mm (3"), Width:, 41.5mm (1.6"), Hex size:, 12mm (0.47"), , ,

Description: Traxxas pair of red front satin chrome wheels for the Traxxas Slash Short Course Racing Truck RTR. Satin chrome with beadlock style. 5-spoke design. Dual profile Requires: Installation on the Traxxas Slash Tires more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, ,

Description: New Blackhawk on-road tires feature a new wheel design. Rears measure 38mm with a final race trued diameter of 47mm. Many compounds are available and fit all popular 1/12 race cars. Sold in pairs. Features:New wheel design 38mm wheel diameter 38mm wheel width Race trued to 47mm diameter Black wheel ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Length:, 563mm, Width:, 260mm, Total height:, 187mm, Wheelbase:, 316mm, Tread (F / R):, 215mm/215mm, Tires (F / R):, 93 × 38mm / 93 × 38mm, Gear Ratio:, 8.86:1, Gross weight:, About 2,600 g, Motor:, ORION R10 EVO. Sensor KV2400 brushless motor, Battery:, 7.2V nickel hydrogen, Li-Fe or 7.4 ~ 11.1V Li-Po (sold separately), ESC:, Vortex R10 Sports, ,

Description: This is the Kyosho DRX VE Subaru Impreza WRC 2008 with Syncro KT-200 2.4GHz Radio included. The Kyosho "D Series" has a new brushless electric added to the lineup, the all new DRX VE! The DRX is Kyosho's rally platform that started out as a nitro car and has rapidly ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Length:, 9.9 inches (252mm), Width:, 7.2 inches (182mm), Wheelbase:, 6.5 inches (165mm), Weight:, 17.6oz (500g), Gear Ratio:, 2.0: 1, Scale:, 1/18, Power:, Electric, Drive:, 4WD, , ,

Description: This is the Team Associated 1/18 scale RC18T2/B2 Team Truck/Buggy 4WD Kit - 2 choices, 1 kit! For those who are having difficulty deciding on whether to build a RC18T2 truck kit or RC18B2 buggy kit, Team Associates has great news! The Team Associated RC18T2/B2 Truck/Buggy Kit has the parts ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:
5.041, (reversed input
8.101 (stock, out-of-box)

, Length:, 14" (356mm), Front Track:, 7.3" (185mm), Rear Track:, 7.3" (185mm), Weight:, 34oz (964g), Height (overall):, 4.72" (120mm), Wheelbase:, 8.1" (206mm), Wheel Diameter:, 1.9" (48mm), Shock Length (front/rear):, 44mm / 44mm, Front/Rear Tires (glued):, Gymkhana-Compound Slicks, Front/Rear Wheels:, Officially Licensed Volk TE37 in 'Monster-green', Electronic Speed Control:, Waterproof XL-2.5 ESC, Motor (electric):, Titan 12T 550, Transmission:, Heavy-Duty with Steel Idler Gear, Gear Ratio (internal):, Overall Drive Ratio:, Differential Type:, Hardened Steel Bevel, Sealed, Gear Pitch:, 48-Pitch, Chassis Structure/Material:, Molded Composite Nylon Monocoque, Brake Type:, Electronic, Drive System:, Shaft-Driven 4WD, Steering:, Bellcrank, Radio System:, TQ AM Radio, Top Speed:, 20+mph, Skill Level:, 2, Battery Tray Dimensions:, 89mm x 35.5mm x 20mm, Included Batteries:, 6-cell NiMh with Charger, Required Batteries:, 8 "AA" (transmitter), XL-2.5 Waterproof ESC, Input Voltage:, 4-8 Cells (4.8V - 9.6V DC), Case Size:, 26.5mm W x 46.5mm D x 22mm H, Weight:, 33 Grams, Motor Limit:, 10-turns, On Resistance (@Trans):, 0.008 Ohms, Reverse Delay:, None, BEC Voltage:, 6.0V DC, Power Wire:, 16 Gauge / 40mm, Input Harness Wire:, 26 Gauge / 130mm, Motor Wires:, 26 Gauge / 130mm, Transistor Type:, MOSFET, PWM Frequency:, 2300 Hz, Thermal Protection:, Thermal shutdown, Profile selection, Sport Mode:, 100% FWD, 100% brakes, 100% REV, Race Mode:, 100% FWD, 100% brakes, no REV, Training Mode:, 50% FWD, 100% brakes, 50% REV, Single-button setup:, Yes, Traxxas EZ-Set, ,

Description: This is the 1/16 scale Traxxas Ken Block Fiesta RTR with a Brushed Motor and an AM Radio included. In 2005, DC Shoes co-founder and accomplished snowboarder and motocross rider Ken Block entered his first pro rally race. Today, Ken Block is one of the most recognized names in motorsports. ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Vehicle, Length:, 19.3" (490mm), Width:, 12" (305mm), Wheelbase:, 12.6 - 12.9" (320mm - 330mm), Weight:, 7lbs (3160g), Final Drive Ratio:, 12.7:1, Body, Length:, 12.5" (318mm), Width:, 8.2" (208mm), Height:, 3.8" (97mm), Tires, Width:, 1.6" (40mm), Diameter with foam inserts:, 4.3" (110mm), Wheels, Hex:, 17mm, Width:, 1.6" (40mm), Diameter:, 3.1" (79mm), ,

Description: This is the 1/8 scale Thunder Tiger EB-4 G3 Buggy RTR with a Yellow Painted Body, Ripper 2000kV BL-40/20 Brushless Motor, and Ace Cougar PS3i 3-channel 2.4GHz Radio included. The Thunder Tiger EB-4 G3 Buggy is compatible with most EB4 S3 Series Parts. Features: 0.12" (3mm) thick aluminum chassis Four ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, ,

Description: Thunder Tiger Rear Truck Wheels w/Tires - Phoenix more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Height:, 5.55" (141mm), Width:, 2.36" (60mm), ,

Description: This is the Pro-Line pair of Blockade VTR 4.0” Tires Mounted to White VTR Zero Offset Wheels. Features: Next Generation Closed Cell Inserts included Revolutionary tread design for maximum life and traction History making - 2011 ROAR Fuel Off-Road National Champion Available in M2 (Medium), M3 (Soft) and M4 (Super ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, ,

Description: Pro-Line pair of Velocity 2.2” Front Hex white wheels for RB5 and B4.1 *with 12mm hex. Pro-Line has you covered with lightweight and durable front racing wheels for the RB5 and B4.1 buggies. The wheels feature the latest in style and performance that will make your buggy look good racing ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Outer Diameter:, 2.50" (64mm), Inner Diameter:, 1.20" (31mm), Width:, 1.25" (32mm), ,

Description: Associated pair of tires and inserts for the 18MT. These tires will fit most 1/18 Scale Trucks. Provides long wear and maximum traction on rough surfaces and pavement. Outer Diameter: 2.50" (64mm) Inner Diameter: 1.20" (31mm) Width: 1.25" (32mm) Requires: Securing to wheels with tire glue. more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Vehicle, Length:, 15.63" (397mm), Width:, 12.32" (313mm), Height:, 6.10" (155mm), Ground Clearance:, 1.89" (48mm), Wheelbase:, 10.98" (279mm), Weight:, 3lbs (1361g), Body, Length:, 15.47" (393mm), Width:, 6.10" (155mm), Height:, 4.33" (110mm), Wheels, Width:, 1.9" (50mm), Diameter:, 2.4" (61mm), Tires, Outer Diameter:, 4" (102mm), Inner Diameter:, 2.2" (56.7mm), ,

Description: This is the 1/10 scale Thunder Tiger Phoenix XT 2WD Stadium Truck 1/10 with a Blue and Gray Painted Body, Ripper IBL36/3900kV Brushless Motor, and Cougar P2 2-ch 2.4GHz IFHSS Radio System. Features: Plastic bathtub type chassis Rear wheel drive with an adjustable slipper clutch Ripper IBL36/3900kV Brushless Motor 18 ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:
2.4(61mm) diameter, 1.5" (38mm) width

, Vehicle, Length:, 15.3"  (390mm), Width:, 9.64" (245mm), Wheelbase:, 10.7"  (272mm), Weight:, 3.96lbs (1800g), Body, Length:, 10.2" (260mm), Width:, 7.1" (180mm), Height:, 3.2" (82mm), Wheels, Front:, 2.2" (57mm) diameter, 1" (26mm) width, Rear:, Tires, Front:, 3.2" (82mm) outer diameter, 1.45" (36mm) width, Rear:, 3.2" (82mm) outer diameter, 1.7" (43mm) width, ,

Description: This is the 1/10 scale Thunder Tiger Tomahawk BX 4WD Nitro Buggy with Painted Yellow Body, Pro-18BX 18cu in (3.0cc) Engine with pull starter, and Ace Cougar PS3 2.4GHz 3-channel pistol grip radio system. Features: Anodized aluminum alloy 0.12" (3mm) thick chassis Four wheel shaft drive Pro-18BX 18cu in (3.0cc) ... more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Specification:

, Outer Diameter:, 3-1/2" (86mm), Inner Diameter:, 3-1/8" (77mm), Width:, 1-5/8" (40mm), Hex Hub:, 3/4" (17mm), Axle Hole:, 1/2" (10mm), ,

Description: Ofna package of four 17mm dual spoke white wheels. Constructed of durable off-white plastic construction. Six dual-spoke design. Fits most 1/8 scale buggies. Requires, tires, inserts and CA glue. more details »
Get More Info
Found 4 years, 10 months ago at RCPlanet
Query took 0.009s