Click the +1 button to give this site a thumbs up at Google!
:, motor:, 2208 to 2215 size, 1800 to 2200kv, Battery:, 3S 1500 - 3s 2200mAh Lipo, Requires:, Your Own 4 Channel TX/RX with Delta Mixing,
The Skywalker Falcon is a 1340mm span flying wing constructed from super durable EPO. This model is supplied in kit form allowing you to fit the airframe out however you wish.Ideally designed and suited to a brushless outrunner pusher power system for flat field flying. There's plenty of space beneath the canopy making mini FPV a definite possibility. The Falcon also doubles an extremely durable slope soaring model - with plenty strength thanks to three carbon spars through the wing and slope friendly EPO.The Falcon ticks a lot of boxes! Featuring electric friendly design considerations; such as an external ESC mount to expose your ESC to cooling airflow and moulded in cable runs. The top mounted servos keep the control linkages off the ground and prevent servo stripping on rough landing areas.Building and fit-out are extremely quick and straightforward. Requiring just a few medium CA joints on the fins and wings. Then just add your radio and power system and you are done! Even the decals are pre-applied for you!Spec
HardwareServo Extension LeadsPly Motor MountCanopy Magnets1500mAh~2200mAh 3s Lipoly Battery2 x 9g Servo22/28 1800kv+ Brushless Outrunner Motor20A~30A ESC w/BEC6X4 Prop
© 2009-2018 RCModelScout, All Rights Reserved.