HobbyKing
HOBBYKING SUPER MINI QUADCOPTER FRAME WITH MOTORS (445MM)
HobbyKing Super Mini Quadcopter Frame is an inexpensive platform ..." />
| Frame Specs | Height |
| Width | 445mm |
| Bolt Holes | 12/16/30mm |
| Weight | 73g |
| Required | ESC |
| Battery | 1000mAh~1300mAh 7.4v 2S |
| Radio | 4 Channel |
| Control Board | HobbyKing Quadcopter Control Board V2.1 |
| Motor Specs | Rpm/V |
| Voltage | 7.4v (2s) |
| ESC | 10A |
| Weight | 16.9g |
| Suggested Prop | 6x3" |
Motor Test Data:, 6030 7.0V 6.9A 48.3W 12660RPM 226G,
The HobbyKing Super Mini Quadcopter Frame is an inexpensive platform ...5 Reviews
HobbyKing
HOBBYKING MINI QUADCOPTER FRAME WITH MOTORS (550MM)
HobbyKing Mini Quadcopter Frame is an inexpensive platform for ..." />
| Height | 50mm |
| Width | 550mm |
| Bolt Holes | 12/16/30mm |
| Weight | 115g |
| ESC | 4 x 12A |
| Radio | 4 Channel |
| Rpm/V | 2200kv |
| Voltage | 7.4v (2s) |
| ESC | 12A |
| Weight | 22g |
| Suggested Prop | 7035 |
Frame Specs:, Required:, Battery:, 1500mAh~1800mAh 7.4v 2S, Control Board:, HobbyKing Quadcopter Control Board, Motor Specs:, Motor Test Data:, 7035 7.4V 8.1A 59.9W 11460RPM 324G,
The HobbyKing Mini Quadcopter Frame is an inexpensive platform for ...3 Reviews
HobbyKing
HOBBYKING Y650 SCORPION GLASS FIBER MULTI-ROTOR FRAME 650MM
Hobbyking Y650 Scorpion multi-rotor frame is a high quality ..." />
| Width | 650mm |
| Motor Bolt Holes | 32~40mm |
*Note:, The camera mount shown in last two photos is for reference only and is not included with the Y650 kit. It will be sold separately as an optional accessory., Specs:, Frame Weight:, 410g (w/out electronics), Required:, Multi-Rotor control board, Note:, All Hobbyking Y series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All Y series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking Y series also feature thicker GF main plates for added stength.,
The Hobbyking Y650 Scorpion multi-rotor frame is a high quality ...5 Reviews
HobbyKing
HOBBYKING X525 V3 GLASS FIBER QUADCOPTER FRAME 600MM
Hobbyking X525 V3 quadcopter frame has arrived! The Hobbyking ..." />
| Width | 600mm |
| Motor Bolt Holes | 14~30mm |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X525 V3 quadcopter frame has arrived! The Hobbyking ...5 Reviews
HobbyKing
HOBBYKING X550 GLASS FIBER QUADCOPTER FRAME 550MM
Hobbyking X550 is a high quality folding-arm quadcopter frame ..." />
| Weight | 312g(Frame only) |
| Width | 550mm |
| Motor Bolt Holes | 19mm width |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X550 is a high quality folding-arm quadcopter frame ...5 Reviews
HobbyKing
HOBBYKING X666 GLASS FIBER QUADCOPTER FRAME 666MM
Hobbyking X666 quadcopter frame is a high quality glass ..." />
| Width | 666mm |
| Motor Bolt Holes | 14~30mm |
| Frame Weight | 415g |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X666 quadcopter frame is a high quality glass ...5 Reviews
HobbyKing
HOBBYKING I86 MULTI-ROTOR CONTROL BOARD
| The Hobbyking i86 Multi-Rotor Control Board supports | Aero (fixed wing) |
| Input Voltage | 4v to 6v |
| Input signal | 50hz standard PPM |
| PWM Frequency | 400hz for ESC, 50hz for servos |
| Gyro scale | +/- 500dps, ODR |
| Operating temp | -40° C to 85° C |
| Size | 40mm x 40mm |
Specs:, Weight: 8g,
Controlled by an Atmel Mega168PA 8-Bit RISC based micro controller ...5 Reviews
HobbyKing
HOBBYKING I86L MULTI-ROTOR CONTROL BOARD (LITE EDITION)
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ..." />
| The Hobbyking i86L Multi-Rotor Control Board supports | Tri copter |
| Input Voltage | 4v to 6v |
| Input signal | 50hz standard PPM |
| PWM Frequency | 400hz for ESC, 50hz for servos |
| Gyro scale | +/- 500dps, ODR |
| Operating temp | -40° C to 85° C |
| Size | 40mm x 40mm |
Specs:, Weight: 8g,
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ...5 Reviews
HobbyKing
HOBBYKING RECEIVER ANTENNA MOUNT DUAL 45DEG WITH DIRECT OR CLIP MOUNT
| Tube length | 2 Mounts |
The HobbyKing receiver antenna mount lets you cleanly affix your receiver antenna at the optimal 45deg vertical orientation for maximum range and reception. The Mount has two securing options: first it can be taped or glued on any flat surface or turned around and clipped on to multi rotor frame board’s edge. The antenna tubes can be cut to any length and provide a secure safe way to vertically mount your antennas., :, Weight:, Size:,
• Duel mounting options flat or edge • Optimal 45deg ...HobbyKing
HOBBYKING 20A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 20A |
| Burst Current | 30A |
| SBEC | 5V/ 2A Output |
| Size | 33*23*6mm |
| Weight | 18g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-4 Cell Lipo / 5-12 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
HOBBYKING 12A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 12A |
| Burst Current | 16A/10sec |
| SBEC | 5V/ 1A Output |
| Size | 22*21*4mm |
| Weight | 10g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-4 Cell Lipo / 5-12 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
HOBBYKING 40A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 40A |
| Burst Current | 60A |
| SBEC | 5.5V/ 4A Output |
| Size | 52*23*7mm |
| Weight | 30g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-6 Cell Lipo / 5-18 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
HOBBYKING 30A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 30A |
| Burst Current | 40A |
| SBEC | 5V/ 3A Output |
| Size | 23*43*6mm |
| Weight | 28g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-4 Cell Lipo / 5-12 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
HOBBYKING QUADCOPTER FRAME V1
| Height | 200mm |
| Witdh | 550mm |
| Skid width | 256mm |
| Ply Wood | 3mm |
| Underside of main frame | 115mm |
| Underside of Camera support | 35mm |
Weight:, 195gram (No electonics), Clearance:,
Built from strong yet light weight Ply wood and glass ...5 Reviews
HobbyKing
HOBBYKING MINI QUADCOPTER FRAME V1 - 539MM
HobbyKing Mini Quadcopter frame is an inexpensive platform for ..." />
| Specs | Height |
| Width | 539mm |
| Bolt Holes | 12/16/30mm |
5 Reviews