Hobby-Lobby
JR DS8411 DIGITAL ULTRA TORQUE MG SERVO
| Size Category | Standard |
| Type | Digital |
| Torque | 155 oz/in @ 4.8V, 188 oz/in @ 6V |
| Speed | .18 sec/60° @ 4.8V,.15 sec/60° @ 6V |
| Dimensions (WxLxH) | 0.75" x 1.54" x 1.36" |
| Weight | 2.03 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless Hi Torque |
| Gear Type | Metal |
| Application | 1.20 Size to 40% Giant Scale Airplanes |
JR DS8411 Servo Features:, For airplane use only., Specs:,
155 oz./in. of unbridled brute strength! With 155 oz./in. of ...Hobby-Lobby
JR DS8711HV HIGH VOLTAGE ULTRA TORQUE DIGITAL SERVO
JR 8711HV Digital Servo Features:, Rugged new aluminum case, Technical Specifications:, Length:, 1.58", Width:, .82", Height:, 1.57", Torque 4.8 / 6V:, 480 oz./in., Speed 4.8 / 6V:, .12 sec., Weight:, 2.6 oz.,
Delivers unheard of power with SuperSteel gear train The JR ...Hobby-Lobby
JR DS8711 ULTRA TORQUE DIGITAL SERVO
| Size Category | Standard |
| Type | Digital |
| Application | Ultra torque |
| Weight | 2.36 oz |
| Bushing Or Bearing | Bearing |
| Gear Type | Metal |
| Gear Material | Metal Alloy |
JR DS8711 Digital Servo Features:, Anodized aluminum heat sink, Specs:, Torque:, 347 oz/in @ 4.8V, 403 oz/in @ 6V, Speed:, .19 sec/60° @ 4.8V,.15 sec/60° @ 6V, Dimensions (WxLxH):, .82 x 1.58 x 1.56 in,
Aluminum heat sink section for optimum reliability The unmatched power ...Hobby-Lobby
JR DS8711HV HIGH VOLTAGE ULTRA TORQUE DIGITAL SERVO
JR 8711HV Digital Servo Features:, Rugged new aluminum case, Technical Specifications:, Length:, 1.58", Width:, .82", Height:, 1.57", Torque 4.8 / 6V:, 480 oz./in., Speed 4.8 / 6V:, .12 sec., Weight:, 2.6 oz.,
Delivers unheard of power with SuperSteel gear train The JR ...Hobby-Lobby
JR DS8711 ULTRA TORQUE DIGITAL SERVO
| Size Category | Standard |
| Type | Digital |
| Application | Ultra torque |
| Weight | 2.36 oz |
| Bushing Or Bearing | Bearing |
| Gear Type | Metal |
| Gear Material | Metal Alloy |
JR DS8711 Digital Servo Features:, Anodized aluminum heat sink, Specs:, Torque:, 347 oz/in @ 4.8V, 403 oz/in @ 6V, Speed:, .19 sec/60° @ 4.8V,.15 sec/60° @ 6V, Dimensions (WxLxH):, .82 x 1.58 x 1.56 in,
Aluminum heat sink section for optimum reliability The unmatched power ...Hobby-Lobby
JR DS8411 DIGITAL ULTRA TORQUE MG SERVO
| Size Category | Standard |
| Type | Digital |
| Torque | 155 oz/in @ 4.8V, 188 oz/in @ 6V |
| Speed | .18 sec/60° @ 4.8V,.15 sec/60° @ 6V |
| Dimensions (WxLxH) | 0.75" x 1.54" x 1.36" |
| Weight | 2.03 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless Hi Torque |
| Gear Type | Metal |
| Application | 1.20 Size to 40% Giant Scale Airplanes |
JR DS8411 Servo Features:, For airplane use only., Specs:,
155 oz./in. of unbridled brute strength! With 155 oz./in. of ...Hobby-Lobby
JR DS8711HV HIGH VOLTAGE ULTRA TORQUE DIGITAL SERVO
JR 8711HV Digital Servo Features:, Rugged new aluminum case, Technical Specifications:, Length:, 1.58", Width:, .82", Height:, 1.57", Torque 4.8 / 6V:, 480 oz./in., Speed 4.8 / 6V:, .12 sec., Weight:, 2.6 oz.,
Delivers unheard of power with SuperSteel gear train The JR ...Hobby-Lobby
JR DS8711 ULTRA TORQUE DIGITAL SERVO
| Size Category | Standard |
| Type | Digital |
| Application | Ultra torque |
| Weight | 2.36 oz |
| Bushing Or Bearing | Bearing |
| Gear Type | Metal |
| Gear Material | Metal Alloy |
JR DS8711 Digital Servo Features:, Anodized aluminum heat sink, Specs:, Torque:, 347 oz/in @ 4.8V, 403 oz/in @ 6V, Speed:, .19 sec/60° @ 4.8V,.15 sec/60° @ 6V, Dimensions (WxLxH):, .82 x 1.58 x 1.56 in,
Aluminum heat sink section for optimum reliability The unmatched power ...Hobby-Lobby
JR DS8411 DIGITAL ULTRA TORQUE MG SERVO
| Size Category | Standard |
| Type | Digital |
| Torque | 155 oz/in @ 4.8V, 188 oz/in @ 6V |
| Speed | .18 sec/60° @ 4.8V,.15 sec/60° @ 6V |
| Dimensions (WxLxH) | 0.75" x 1.54" x 1.36" |
| Weight | 2.03 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless Hi Torque |
| Gear Type | Metal |
| Application | 1.20 Size to 40% Giant Scale Airplanes |
JR DS8411 Servo Features:, For airplane use only., Specs:,
155 oz./in. of unbridled brute strength! With 155 oz./in. of ...HobbyKing
JR DS8921HV ULTRA HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 36.5Kg.cm (7.4v) |
| Speed | 0.13s/60° (7.4v) |
| Weight | 72g |
| Voltage | 6~8.5v |
| Dimensions | 38 x 21 x 40.5mm |
Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The DS8921HV is part of JR’s range of high voltage ...HobbyKing
JR MPH83TWV LINEAR HALL SENSING WIDE VOLTAGE BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 73g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 26.3(4.8V)/40.6(7.4V)kg.cm, Speed:, 0.19(4.8V)/0.13(7.4V)sec/60°, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MPH83TWV is a very impressive servo, extreme torque and ...HobbyKing
JR DS6301 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND CASE
| Torque | 33.0Kg.cm |
| Speed | 0.17s/60° |
| Weight | 80g |
| Voltage | 4.8v |
| Dimensions | 38.5 x 21 x 40.5mm |
Please note:, The DS6301 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
JR Engineers have pushed the boundaries of R/C servo design. ...HobbyKing
JR DS6315HV HIGH TORQUE HIGH SPEED DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 17.8Kg.cm (7.4v) |
| Speed | 0.07s/60° (7.4v) |
| Weight | 80g |
| Voltage | 6~8.5v |
| Dimensions | 38 x 21 x 40.5mm |
Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The DS6315HV is part of JR’s range of high voltage ...HobbyKing
JR MP82TWV WIDE VOLTAGE ULTRA HIGH TORQUE BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 72g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 26.3 Kg.cm (4.8V) / 40.6 Kg.cm (7.4V), Speed:, 0.19s/60° (4.8V) / 0.13s/60° (7.4V), About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MP82TWV has been designed for use with aerobatic aircraft ...HobbyKing
JR MP82SWV WIDE VOLTAGE HIGH SPEED BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 72g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 12.8 Kg.cm (4.8V) / 19.8 Kg.cm (7.4V), Speed:, 0.09s/60° (4.8V) / 0.06s/60° (7.4V), About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MP82SWV has been designed for use with aerobatic aircraft ...