Narrow your results
Price
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» Tx and Rx Systems

Displaying 0-15 of more than 1000 results
Sort By:
Specification:

, Length:, 4-3/8" (111mm), Width:, 1-1/8" (29mm), Height:, 1-1/8" (29mm), Regular charge rate:, 50mAh for 15 hours, Quick charge rate:, 150mAh for 5 hours, ,

Description: Transmitter NiCd Battery for these Futaba radios:2 CH: 2PD, 2PKA 3 CH: 3PB, 3UCP, 3PG 4 CH: 4NL 5 CH: 5UAF, 5UAP, 5NLH, 5NLP 6 CH: 6NHP, 6NLK 7 CH: 7UAPS, 7UAFS, 7UHFS more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Outer Diameter:, 44mm (1.7"), Width:, 20mm (0.79"), ,

Description: Futaba wheel is constructed of silver nylon. Requires: Installation on the transmitter more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Speed:, 0.06 sec/60° @ 4.8V, Torque:, 47 oz-in @ 4.8V, Dimensions:, 1.6  x 0.8 x 1.4" (40 x 20 x 37mm), Weight:, 1.7oz (49g), Power Supply:, 4.8V (Futaba does NOT recommend using 6V), ,

Description: Coreless motor for reduced weight and high-speed response. Digitally enhanced microprocessors cut in half the response time from transmitter input to servo reaction. Dual ball bearing gear train. Dust and water resistant-not water proof. Black plastic case. One year warranty. S9254 Digital Servo Precautions, -It is best to avoid long ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Overall length:, 24 inches (609.6 mm), Compatible with Servos and Receivers that Use Airtronics 'Z', ,

Description: This Airtronics Servo Extension is 24 inches long and is regularly used to extend the servo lead’s reach to your receiver. This Airtronics Servo Extension is perfect for extending the aileron servo leads through wing panels, or if your model's elevator and rudder servos are mounted in the back of ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Torque (Kg-cm)/ (oz.-in.)@ 4.8V:, 9.6/133, Speed (sec / 60°) @ 4.8V:, 0.16, Gear Type:, All Metal, Bearing:, Coreless, Dimensions (mm):, 41.8 x 20.6 x 39.6, Weight (g/oz):, 66 / 2.328, ,

Description: This is the ACE R/C DS1213 High Torque Digital Servo. Whatever your application; 1/8 scale racing, a 40% Extra or a 90 sized helicopter, or even a large racing yacht, this servo has the power and performance to exceed your expectations. Features: Can be used for a wide variety of ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Receiver, Type:, 3 channel FM single conversion, Operating voltage:, 4.8V-6.0V, Current drain:, 15 mA.+/- 0.15mA, Max BEC output:, 3A, Length:, 1.5" (37mm), Width:, 1.0" (25mm), Height:, 0.6" (15mm), Weight:, 0.6 oz (17 grams), Transmitter, Current Drain:, 180mA, Modulation:, FM, Power Supply:, 8 AA alkaline, NiCd or NiMH batteries, Frequencies:, 27MHz (6 channels), 75MHz (30 channels), Servo, Voltage Range:, 4.8-6V, Speed:, 0.15sec/60° (6V), Torque:, 51oz/in (6V), Length:, 1.6"  (40mm), Width:, 0.79" (20mm), Height:, 1.4"  (36mm) not including horn, Weight:, 1.5oz (42.5 grams), ,

Description: Setting yourself apart from the rest is a breeze with the Aggressor FM radio. With its ergonomically designed pistol grip, plus the customized "palm pad" and "tuning cover" offers a custom look for your radio that is all your own. Featuring servo reverse, dual rate steering, and a foam steering ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .021 lbs (0.34oz), Dimensions:, 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack., Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should, NOT, use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., You can use Analog or Digital servos with this receiver. For the best results, we recommend using Digital servos., ,

Description: The Airtronics RX461 (92010) 4-Channel 2.4GHz FHSS-4T Surface Receiver is a Super Response, Telemetry-capable receiver that is used with the Airtronics MT-4 2.4GHz FHSS-4T transmitter. The Airtronics RX-461 Surface Receiver supports Airtronics Telemetry and features an extremely low latency time and high frame rate, making you feel more connected to ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, ,

Description: This is an Airtronics Dry 4 Cell Receiver Battery Holder with Switch Harness. This Airtronics battery holder is generally used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Dimensions:, 22.8 x 12 x 29.4mm, Weight:, 15.8g, Speed (sec/60°):, 0.16, Torque (kg-cm/oz-in):, 4.6/63.8, Gear:, Half Metal, Case:, Aluminum, ,

Description: Micro size digital servo with refined design that brings out extraordinary performance. Ideal for CCPM and Rudder on 450 level heli and Park Fly Airplane. Features * Over-spec refined design overturns output limitation of ordinary micro size servo. * The metallic body design not only exudes an exquisite style but ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, ,

Description: This is the Savox Gear Set with Bearings for the Savox SA-1231SG High Torque Coreless Steel Gear Digital Servo. more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, Input Voltage:, 2-3S LiPo/LiFe cells or 4-9 NiMH cells (1.2V/cell), On-Resistance (dual motor):, 0.0016 ohm at 25° C trans temp, On-Resistance (single motor):, 0.0008 ohm at 25° C trans temp, Size:, 1.16 x 1.47" (29.5 x 37.3mm), Weight (w/o wires):, 1.30oz (36.9g), Motor Limit:, 27-turn (2S), 33-turn (3S) 540-sized dual brushed motors, BEC:, 6.0 volts DC/5.0 amps, Status LEDs:, 4 on-board; 2 external, Voltage Cut-Off:, 6.25V (2S LiPo), 4.75V (2S LiFe), 9.75V (3S LiPo) 7.125V (3S LiFe) (when LiPoly cut-off circuitry is enabled), Power Wires:, 14G super-flex copper-strand silicone wire, ,

Description: Picture the functionality and utility of two Novak Goat Crawler Speed Controls in brushed mode and Novak's Dig Unit; now, envision it in one highly programmable, inexpensive speed control and you get the first-of-its-kind, dual-motor compatible M2 Dig Dual Brush ESC. Combined with two brushed motors, the M2 Dig independently ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:
540-Size3.5-turn or higher sensored; 550-Size

, Motor Type:, Sensored Brushless, Fwd/Brk/Rev:, F / B / R, Input Cells:, 1-2S LiPo/LiFe or 4-6 NiMH, Footprint:, 1.16” x 1.47” (29.5 x 37.3 mm), Height:, 0.97” (24.6mm), Weight (w/o wires):, 1.29 oz (36.6 g), On-Resistance:, 0.00040 ohms @ 25°C trans. temp., Motor Compatibility:, BEC:, 6.0 volts DC / 3.0 amps, Wire Size:, 14G Super-Flex Copper-Strand Silicone Wire, Status LEDs:, 5 multi-colored, ,

Description: This is the Novak GTB 2 Racing Brushless ESC with X-Drive - Low Profile. Enthusiasts and team drivers who have used X-Drive in side-by-side comparisons have reported a noticeable performance advantage. This update not only makes your speed control more efficient, it may very well make you faster and put ... more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, ,

Description: Hitec HS-5665MG/5685MG Case Set more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, ,

Description: Align DS410 Servo Horn. Suitable for servos of ALIGN DS410/DS420. more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Specification:

, ,

Description: Associated 4 cell battery holder for the receiver used in the Monster GT is constructed of plastic. Holds four AA cells. Works in any R/C vehicle needing a 4 cell battery holder. Requires: Installing batteries and connecting to receiver. more details »
Get More Info
Found 5 years, 8 months ago at RCPlanet
Query took 0.003s