Narrow your results
Price
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» Tx and Rx Systems

Displaying 0-15 of 733 results
Sort By:
★ ★ ★ ★ ★ Rating: 5 - 11 reviews
Specification:
Includes1 x RF module 2.4G

Features:, , Includes/Requires:, ,

Description: This module is designed to convert your conventional non-module based PPM transmitter to 2.4Ghz provided your transmitter has a built-in PPM board. Like Multiplex EVO etc. * You need to open the transmitter, and solder 3 wires, and plug in the antenna, so basic electronic skill is required. 1 x ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Working voltage5-6V
Power≤100mw
Size43.5 x 28x9mm
4 temperature sensor portstesting range -20 to 220 ℃ or -4.0 to 428°F
3 voltage testing portstesting range

, , , , , , Specifications:, , , , , , , , , , , WALKERA Two-way 2.4G Telemetry Module for, DEVO 12 Transmitter, WK-CTL01-D, Current: , 2 RPM testing ports (RPM sensor is NOT included), 1 GPS port (GPS module is NOT included), 1 spare port (for future use), , ,

Description: Includes/Requires: Includes: 1 x two-way telemetry module 4 x temperature sensors 2 x volt sensor cables * No printed manual. more details »
Get More Info
Found 5 years, 8 months ago at HiModel
★ ★ ★ ★ ★ Rating: 5 - 1 reviews
Specification:

, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (single conversion), , Type, , RP4S1, , Size, , 42.5x18.2x9.36mm, , Weight, , 6.6g, , Sensitivity, , better than 2.0μv, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-4, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 pole ceramic filter, , Filtering, , DSP filtering with mild algorithm, , Shift Polarity, , Positive or Negative(auto-detect), , Case, , Shrink wrap, , operating voltage, , 4.8V~6.0VDC, , operating current, , 17mA, , Modulate, , FM/PPM, , Range, , >1.2km/3900ft, , Filtering, , DSP, , Crystal size, , UM-5, , Intermediate Frequency, , 455KHZ, , IP3, , +9dBm, , , ,

Description: Features: The smallest synthesized receiver in the R/c world Corona RP4SI, 4ch single conversion synthesized receiver. 1. Synthesized receiver gets rid of the inconvenience of using the crystal. Receivers with crystal still use the technology of 1970's which have to switch the frequency by changing the crystal. Users have to ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Operating Voltage Range3.5V~10V
Dimension37x22x8mm
Weight7.8g

, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 7, , ,

Description: Features: FrSky 2.4G 7-channel Futaba FASST Compatible TF Receiver TFR6-A, side pin version. Compatibility: FASST 2.4G: Air Systems (7CH Mode/Multi Mode) FrSky TF Modules: TF-8M, TF-14M Features: 1) Lighter weight and physically smaller; 2) Two selectable failsafe setting options. Includes/Requires: Includes:1 x receiver TFR6-A more details »
Get More Info
Found 5 years, 8 months ago at HiModel
★ ★ ☆ ☆ ☆ Rating: 2 - 2 reviews
Specification:
Speed0.10 sec/60° @ 6V
Torque0.4kg-cm @ 6V
Dimensions20 x 17.6 x 8 mm
Weight3.7g
Connector typeJR/Futaba compatible

, , , , , , Specifications:, , , , , , , , , , , Power Supply: 6V, , ,

Description: Features: The is the new Power HD high performance analog servos. Includes/Requires: Includes:1 x servo 1 x servo horn set more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
ModelFLVS-01
Dimension45*21*7mm
Weight5.2g
Measurement range1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range0.20~4.20V
Voltage display resolution0.01V
Voltage detection precision0.03V
Current of the board15.5mA
Operating temperature range-30℃~70℃
Pixel128*64 with OLED display screen

, , , , , , Specifications:, , , , , , , , , , , Specifications:, ﹡Note:, To make the FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, you may need to upgrade your firmware of sensor hub and DHT-U to version 2.0, refer to included instruction manual for details., , ,

Description: Features: Different sensors facilitate to monitor different data, such as fuel lever, speed, longitude, latitude, altitude, temperature, RPM, acceleration, etc. If the model is driven by battery, users could use in-built or external battery voltage sensor to monitor model’s battery voltage. Includes/Requires: Includes: 1 x lipo voltage Sensor FLVS-01 1 ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
★ ★ ★ ★ ★ Rating: 5 - 2 reviews
Specification:
● Mode 1FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is
● Mode 23D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to
● Mode 3self-balancing mode. In this mode, the FY-30A will automatically command the

, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,

Description: Features: FY-30A is an inertial attitude measurement instrument used for automated stabilization of fixed wing model aircrafts and two axis camera gimbals. FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
★ ★ ★ ★ ★ Rating: 5 - 2 reviews
Specification:
Dimension34.2×18.4×8.7mm
Control range800m
Operating Voltage4.8V~6.0V

, , , , , , Specifications:, , , , , , , , , , , SUPER-LINK 2.4 GHz 7-CH Receiver SLink7R, Weight: 9g, , ,

Description: Features: Features ●Long Range, light weight ●Easy to bind and operation ●Receiver is small and light ●Failsafe. You can set the receiver to default to a pre-set position on all channels in the unlikely event of signal loss. ●Scan the clear frequency channel and then make signal transmission. ●Ultra-low power ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Measurement Range0~50000r/min
InstallationPoint the RPM sensor straight up at any accessory that requires RPM reading.
NoteIndoor alternating current lighting will affect the RPM reading.

, , , , , , Specifications:, , , , , , , , , , , RPM sensor reads RPM data by using an optical sensor., , ,

Description: Features: Different sensors facilitate to monitor different data, such as fuel lever, speed, longitude, latitude, altitude, temperature, RPM, acceleration, etc. If the model is driven by battery, users could use in-built or external battery voltage sensor to monitor model’s battery voltage. Includes/Requires: Includes:1 x RPM sensor more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Operating Voltage Range3.5V~10V
Operating Temperature Range-10℃~80℃
Dimension42*17*7mm
Weight4.6g
FASST 2.4GAir Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) (including 3PK, 4PK)
FrSky TF ModulesTF-8M, TF-14M

, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 4, Compatibility:, Bind procedure:, 1) Ascertain that the transmitter is in the PPM mode. Turn the transmitter off., 2) Turn on the transmitter while holding the F/S button on the transmitter module. Release the button. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect the provided binding cable to corresponding channels of VD5M (see 1.1 Compatibility chart for details), and connect battery to the receiver. LED on the receiver will flash, indicating the binding process is completed. Turn off both the transmitter and receiver, and disconnect the binding cable from VD5M., 4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver will indicate the receiver is receiving commands from the transmitter., The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced., Note: Make sure corresponding channels are connected by provided binding cable when working with the transmitter module., , ,

Description: Features: Features 1) Compatible with FASST 2.4G: Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode); 2) CPPM and RSSI (PWM) output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM); 3) Lighter weight and physically ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Channel number6 channels

, , , , , , Specifications:, , , , , , , , , , , Receiver type:RG661A (the receiver using same sticker on top as RG661, but with an additional sticker on the back indicating "Model: SM-RG661A"., Voltage:4.8--6V, Weight:6g, Size:34*20*14mm, Antenna length:14cm, Note: The receiver GR661A does not compatible with previous old version transmitter TG661, and only compatible with the latest version TG661A., , ,

Description: Features: This receiver only work with transmitter SPRINGRC 2.4Ghz 6-Channel Radio TG661A, and does NOT compatible with old version TG661. Includes/Requires: Includes: 1 x mini 6-ch receiver RG661A more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:

, , , , , , Specifications:, , , , , , , , , , , Size, , , 36*18.7*8.2mm, , , Weight, , 6.8g, , Sensitivity, , about 2.0μV, , Selectivity, , ±8kHz at 65dB down, , Number of channels, , 1-6, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 element ceramic filter, , Filtering, , DSP filtering in MCU with mild algorithm, , Shift polarity, , Positive or negative (auto-detect), , Case, , Shrink wrap, , Operating Voltage, , 4.8V~6.0VDC, , Operating Current, , 11mA, , Modulate, , FM/PPM(pulse position modulation), , , ,

Description: Features: RS610II Receiver CORONA never stops improving the receiving range. RS610II has improved the receiving range as far as 1.5Km (checking range on ground). If we use traditional technology, how big the receiver should be made to reach such a far receiving range? Further remote control distance means more reliable ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:

, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (Dual conversion), , Type, , RP6D1, , Size, , 28.5X15X7.4, , Weight, , 8.6g, , Range, , >1.5km/4900ft, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-6, , Filtering, , DSP, , Intermediate Frequency, , 10.7MHZ, , IP3, , +10dBm, , * Compatible with both Futaba & JR transmitters., , ,

Description: Features: ● You can switch the frequency freely with the RP6D1 6CH dual conversion synthesized receiver. ● The 'one button' function makes it extremely easy to change frequency. ● Despite the small size, the receiving range reaches as far as 1 mile (depending on environments) ● The dual ceramic IF ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
★ ★ ★ ★ ★ Rating: 5 - 1 reviews
Specification:
TypeCS-939MG Analog
Size22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight12.5g
Operating voltage4.8V~6.0V
Operating speed0.14sec/60º
Stall torque2.5kg.cm
Gear MaterialMetal
Connector wire length215mm
Temperature-20℃~+60℃

, , , , , , Specifications:, , , , , , , , , , , , ,

Description: Includes/Requires: Includes: 1 x servo with servo horns more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Specification:
Operating Voltage4.8-6.0 Volts
Operating Speed (4.8V)0.08sec/60°
Operating Speed (6.0V)0.07sec/60°
Stall Torque (4.8V)1.8kg.cm
Stall Torque (6.0V)2.0kg.cm
Dead Band Width≤3usec
Dimensions23.6 x 11.8 x 22mm
Weight14g
Bearing TypeTop Ball Bearing
Gear TypeMetal Gears
Motor Type3-Pole Neodynium Magnet
Connector Wire Length180mm
Current Drain (4.8V)5.3mA/idle and 140mA no load operating
Current Drain (6.0V)6.6mA/idle and 150mA no load operating

, , , , , , Specifications:, , , , , , , , , , , Full AVCS Gyro DS mode compliant, , ,

Description: Features: The D90MG is a high speed and accurate digital servo for Helicopter Gyro Operation, 3D airplanes and helicopters, and glider applications. The D90MG Digital Servo provides extremely accurate neutral position. These servos are tailored for 3D fixed wing planes and micro electric helicopters. These digital servos can also find ... more details »
Get More Info
Found 5 years, 8 months ago at HiModel
Query took 0.078s