RangeVideo
900MHz 800mW FPV video transmitter w/antenna & harness
| - Red | Power (10-12VDC) |
| - Black | GND |
| - Yellow | Video in |
| - White | Audio in |
Warning:, DO NOT power ON the transmitter without the antenna !! Doing so will burn the transmitter., It is very easy to implement this transmitter into your design using the included wiring harness. You can hack the harness and find these wires:, The transmitter power input is wide:, - 10V 26dBm,
Details
These powerful 900MHz 800mW audio/video wireless transmitters are mainly used for the long range video FPV, surveillance project with the CCTV security cameras, and can be used to send audio and video signals from any analog video sources; but can also send audio and video wireless from camcorders, TV's and other devices with a composite video out.
This is the newest version of our best selling transmitter. This video transmitter is preferred over 2.4GHz alternatives because it is less prone to interference from outside sources such as wifi networks and cordless telephones. It also won't interfere with 2.4GHz radio control systems (Spectrum DX6/7, FASST, FRsky). 2.4GHz video transmitters will absolutely reduce the range of such R/C systems.
You can connect any composite video source to this transmitter.
- Digital camera video out
- Video camera video out
- Micro camera video out
- 11V 27dBm 500mW
- 12V 28dBm 600mW (nice power level)
- 13V 28.7dBm
- 14V 29.5dBm (gets darn hot !! so dont do it)
The transmitter heats up relative to the operating voltage. It is normal for the transmitter to heat up 60 degrees Celsius when being powered from a 12VDC source. For prolonged life it is recommended to use a heat sink or place the transmitter in an airflow.
wire harness connector pin-out
Antenna coax 12 cm RG316/U
wiring harness.
Example of complete system.
Check price and availability
Found 10 years, 7 months ago