DPCAV
Digital Oscilloscope, 2-Channel / 10MHz (Portable)
| Analog Bandwidth | 0 - 10MHz |
| Sensitivity | 10mV/Div - 2V/Div |
| Resolution | 8-bit |
| Input Impedance | 1M ohm |
| Maximum Input voltage | 50Vpk (for 1X probe) and 400Vpk (for 10X probe) |
| Coupling | DC, AC, GND |
| Max Real-time Sampling Rate | 50MSps |
| Timebase | 0.2us/Div - 10 minutes/div |
| Record Length | 500 - 8000 points (each channel) |
| Run/Hold Modes | one button switchable |
| Trigger Modes | Auto, Normal, Single |
| Trigger Types | Rising/falling edge |
| Trigger Sources | Ch 1 or Ch 2 |
| Trigger Position | 0 - 100% of capture buffer |
| Supply Current | 300mA @ 3.7V(LCD backlight ON, typical). |
| Dimension | 140mm X 70mm X 30mm |
| Weight | 190 gram (including battery) |
| Documents, firmware, and tools | Users Manual |
Portable 2-Channel 10MHz Digital Oscilloscope:, This portable scope offers a lot of features at an affordable price. It has 2-channels with 10MHz analog bandwidth (50msps) and it includes a rechargeable battery pack. Two switchable 10X scope probes are provided too!, The DSO-094 has useful features that are not commonly found in other low cost oscilloscopes. For example: It can be placed in "Persistent Display" mode that keeps waveforms on screen until you erase them; This is very useful when combined with NORMAL trigger mode to capture and compare multiple waveforms that meet your trigger conditions., Features:, , Specifications:, , Number of Channels: 2,
This is a FACTORY ASSEMBLED scope; It is not a kit. That's right, it is ready to use. Simply charge it and then put it to work.
The 3.7V/1200mAH Li-Ion battery (included) can be recharged from any USB port (requires common mini-B USB cable, not included). The switchable 10X scope probes (two are included) are high quality so you can make measurements just like the pro's.
The scope can be used by hobbyists to measure R/C servo signals, video signals, digital signals, and other waveforms. But that is just the beginning since it can be used for complex measurements, including 2-channel graphing using its
Y/T
and
Y/X
modes.
10MHz analog bandwidth
50Msps real-time sampling rate on each channel
Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe)
Record length 500 - 8000 points on each channel
Trigger position adjustable
Trigger sensitivity 0.2div - 4div adjustable
Save/Recall up to 4 captures
Screen image hardcopy via USB
Firmware upgradable via USB
Battery / USB powered
Trigger sensitivity 0.2div - 4div adjustable
Trig Point Indicator
Y/T mode and Y/X mode selectable
Save/Recall up to 4 captures
Screen image hardcopy via USB connection
USB connection for data transfer and firmware upgrade
Rotary encoder for quick parameter setting
2-inch 128 X 64 black-and-white dot-matrix LCD
Backlight ON/OFF control
Contrast adjustable
3.7V / 1200mAH Li-Ion battery
Built-in charger
Firmwares
How to Calibrate 10X Probe
How to Upgrade Firmware by Bootloader
Powering JYE Tech Oscilloscopes With Cellphone Batteries
Windows application for upgrading firmware via Bootloader
Virtual COM Port driver (for UART-USB bridge CP210X)
Manufacturer's Web Site
Check price and availability
Found 11 years, 1 month ago