HobbyWireless
FPV584 PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mA |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：400mW, Receiver's features:, - R5800 Dual (2x) Audio and Video outputs., Includes:-, Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
FPV582 PLUG AND PLAY 5.8 GHZ 200MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| Receiver's features | - Dual (2x) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：23dBm, Includes:-, Note:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
TX-V512 500MW 1.2 GHZ PLUG AND PLAY TRANSMITTER WITH WIRES - LAWMATE
| 6 channels | CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040 MHz. |
| Nominal output impedance | 50 ohms |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
| Weight | 18g (transmitter only) |
Details:, (We can't ship this item to US address, because the available channels are not legal in USA)., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Operating Voltage: 5.5 - 13 volts DC (to use with 12V camera you can only power the transmitter using 12V source, 3S 11.1V Lipo battery works great)., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
TX-V905 500MW 900 MHZ PLUG AND PLAY TRANSMITTER.
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, This is an easy to use plug and play transmitter only, part of our FPV905 plug and play system., The plug and play board has lots of important features built-in such as:, , Channels:, CH1 910 MHz (USA), Features:, * 500mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
TX-V1012 1000MW 1.2GHZ PLUG AND PLAY TRANSMITTER - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 40g (transmitter only) |
Details:, This is a plug and play transmitter only, part of our FPV1012 plug and play system., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...