HobbyKing
TURNIGY TALON QUADCOPTER (V2.0) CARBON FIBER FRAME 550MM
| Width | 550mm |
| Motor Bolt Holes | 17/20/26mm |
Specs:, Weight:, 280g (w/out electronics), Requires:, 28-XX or 35-XX brushless outrunner motor x 4,
The Turnigy Talon V2 Quadcopter frame is a crafted from ...5 Reviews
HobbyKing
TURNIGY TALON ALLOY MOTOR MOUNT BLOCK (2PCS/BAG)
,
Turnigy Talon Alloy Motor Mount Block (2pcs/bag)5 Reviews
HobbyKing
BUMBLEBEE CARBON FIBER QUADCOPTER FRAME 550MM
| Width | 550mm |
| Height | 306mm |
| Ground Clearance | 193mm |
| Weight | 950g |
Features:, High quality genuine carbon fiber construction., Specs:, Required:, 1 x Hobbyking multi-rotor control board,
The Bumblebee Carbon Fiber Quadcopter is a stylish and high ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4225-610KV 16POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 610 |
| Max Surge Watts(W) | 330 |
| Working current | 16 amps |
| Max.current(10s) | 22 amps |
| No Load Current | 0.3 amps |
| Intemal Resistance | 0.091 ohm |
| Dimensions(Dia.xL) | 42 x 24.5 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 12 x 6 |
| Weight | 86g |
Spec:, Lipo cells:4s, Number of Poles:16,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
EXTENDED LANDING SKID SET FOR SK450 QUADCOPTER FRAME
| Length | 200mm (overall) |
| Glass Fiber Thickness | 1.5mm |
*Note:, This is an extended landing skid set only, SK450 multi-rotor frame sold separately, Specs:, Weight:, 93g (w/all hardware), Includes:, Complete extended landing skid set,
Want to mount a camera underneath your SK450 multi-rotor frame ...5 Reviews
HobbyKing
MICRO INTEGRATED PCB W/ESCS QUADCOPTER FRAME 235MM (KIT)
| Width | 235mm |
| Height | 35mm |
| Motor mount holes | 13mm |
| Integrated ESC | 4 x 8A |
Features:, Compact, lightweight design, Specs:, Weight:, 82g (w/out electronics), Required:, 4 x brushless outrunner motors,
This tiny yet brilliantly designed Mini-Quad features an integrated PCB ...5 Reviews
HobbyKing
TURNIGY TALON TRICOPTER (V1.0) - EXTENDED CARBON FIBRE BOOM (380MM) (3PCS)
,
Turnigy Talon Tricopter (V1.0) - Extended Carbon Fibre Boom (380mm) ...5 Reviews
HobbyKing
TURNIGY TALON TRICOPTER (V1.0) - INTEGRATED TAIL SERVO MOUNT SET
,
Turnigy Talon Tricopter (V1.0) - Integrated Tail Servo Mount Set2 Reviews
HobbyKing
WALKERA QR X800 FPV GPS QUADCOPTER W/RETRACTS (PNF)
Type:, Main control board:, Servo:, Main rotor dia.:, Main rotor length:, Brushless motor:, Brushless ESC:, Battery:, Flight time:, Flying weight:, Dimension:, Aluminum case dimension:, Walkera QR X800 GPS QuadCopter,
The all new Walkera QR X800 is a professional level ...HobbyKing
TURNIGY LD9017 BRUSHLESS GIMBAL MOTOR
Poles:, KV (RPM/V):, Resistance:, Wire:, No Load Current:, Voltage:, Shaft:, Motor Dimensions:, Top Mounting Holes:, Bottom Mounting Holes:, Mounting Holes:, Weight:, Wire Length:, No connectors are supplied with this motor.,
The Turnigy LD9017 brushless gimbal motor is very strong and ...HobbyKing
AFROFLIGHT NAZE32 ACRO ABUSEMARK FUNFLY CONTROLLER
• Flexible motor outputs, support various airframe types:, Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X),
The popular Naze32 is here! Initially designed for use with ...HobbyKing
MULTISTAR ELITE 2204-2300KV MULTI-ROTOR MOTOR (CCW PROP ADAPTER)
KV(RPM/V):, Lipo cells:, Max current:, Max Amps:, No Load Current:, Internal Resistance:, Number of Poles:, Dimensions(Dia.xL):, Motor Shaft:, prop shaft:, Weight:, bolt hole spacing:, Lamination thickness:, Magnets:, Balancing spec:, Wire:, Connector:, Some ESC may have sync issue if you are not running the latest software (SimonK or BLheli), Please make sure you update and configure your esc for this type of motor.,
The Turnigy Multistar Elite Outrunners are designed with one thing ...HobbyKing
TURNIGY PLUSH 40AMP SPEED CONTROLLER
| Cont Current | 40A |
| Burst Current | 55A |
| BEC Mode | Linear |
| BEC | 5v / 3A |
| Lipo Cells | 2-6 |
| NiMH | 5-18 |
| Weight | 33g |
| Size | 55x28x13mm |
5 Reviews
HobbyKing
TURNIGY PLUSH 60AMP SPEED CONTROLLER
| Cont Current | 60A |
| Burst Current | 80A |
| BEC Mode | Switching |
| BEC | 5v / 3A |
| Input | 5.6v-22v |
| Weight | 60g |
| Size | 80x31x14mm |
| (Maximum) | 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles). |
5 Reviews
HobbyKing
TURNIGY PLUSH 10AMP 9GRAM SPEED CONTROLLER
| Cont Current | 10A |
| Burst Current | 12A |
| BEC Mode | Linear |
| BEC | 5v / 2A |
| Lipo Cells | 2-4 |
| NiMH | 5-12 |
| Size | 27x17x6mm |
Weight: 9g,
Plush 10A Brushless Speed Controller The Plush series of ESC ...5 Reviews