ReadyMadeRC
PENGUIN V1 CUSTOM MIX BUILDER PACKAGE
Hitec Servo Package | 3 HS81, 1 HS65HB servo |
Hitec Metal Gear Servo Package | 3 HS82 MG, 1 HS65MG Servo |
Wingspan | 1720MM/67.7inch |
Length | 1230MM/48.5inch |
Wing Area | 36dm/3.9ft2 (Mainwing Area) |
Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
ESC | 40A for M2220 or 60A for M2815 |
Servo | 3pcs 17g servo+ 1pcs 9g servo. |
Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 (sold separately) |
Static Thrust | Motor M2220 1.5Kg/53.0oz. |
Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
Part No | FUP1201 |
17gServo | 3PCS/ 9g servo |
Propeller 9050 3Blade | 1PCS |
Part No | FUP1202 |
Propeller 9050 3Blade | 1PCS |
Part No | FUP1203 |
Part No | FUP1204 |
Part No | FUP1205 |
17gServo | 3PCS/ 9g servo |
Propeller 9050 3Blade | 1PCS |
M2815 Recommended battery capacity at least >5000mAh/ ESC | 60A |
Options include:, Motor/ESC:, No motor/ESC, Servos:, No Servos Included, ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , Options for other versions:, , Finwing Universeye_Penguin airplane features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
We had an excess of spare wing and fuselage sets ...ReadyMadeRC
DUALSKY 460 HORNET QUADCOPTER ARF
Motor | 4 Dualsky XM2830CA-Hornet (830 KV) |
ESC | 4 Dualsky XC22A-Hornet |
Flight Controller | Dualsky FC430 |
Weight | 730 grams without battery |
Max Flying Weight | 1800 grams |
Battery Recommended | 1700-3300 mAh 11.1V |
Length | 460 mm |
Propellers | 9x4.7SF |
SPECS:, ,
This new quad copter from Dualsky comes 90% complete and ...ReadyMadeRC
LADYBIRD V2 RTF WITH DEVO 4 RADIO
1). Dimensions | 8.5*8.5cm |
2). Height | 3cm |
3). Weight | 33g |
4). Motors (x4) | 0720RN57A-9M-130NL52 |
5). Receiver | RX2643H-D |
6). Battery | 3.7V 240mAh |
7). Radio range | <=100m |
8). Flight time | 6-8min |
9). Standard transmitter | DEVO 4 |
10).Optional transmitter | DEVO 6/7/8s/10/12s |
3). Compatible with DEVO series radio | Devo 12S/8S/10/7/7E/6S/2402D.Cute and lifelike appearance similar to Ladybird. |
ReadyMadeRC
LADYBIRD V2 FPV & RTF WITH DEVO F4 RADIO
1). Dimensions | 8.5*8.5cm |
2). Height | 3cm |
3). Weight | 33g |
4). Motors (x4) | 0720RN57A-9M-130NL52 |
5). Receiver | RX2643H-D |
6). Battery | 3.7V 240mAh |
7). Radio range | <=100m |
8). Flight time | 6-8min |
9). Standard transmitter | DEVO F4 |
10).Optional transmitter | DEVO 6/7/8s/10/12s |
3). Compatible with DEVO series radio | Devo 12S/8S/10/7/7E/6S/2402D.Cute and lifelike appearance similar to Ladybird. |
Tx5805 Video Transmitter/Camera Specs:, - PAL/NTSC, Ladybird Specs:,
Walkera Ladybird V2 with built in FPV camera and transmitter. ...ReadyMadeRC
CASTLE CREATIONS PHOENIX EDGE 75 BRUSHLESS ESC, 34V MAX. W/BEC
MIN | 2S LiPo MAX |
Helis:, 500 class, Fixed wing:, .40 - .52, Input voltage:, Max continuous amperage at full throttle:, 75 amps*, BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, 5 amp peak**, Width:, 2.0" (50.8mm), Length:, 2.8" (71.9mm), Height:, 0.9" (23.2mm), Weight w/wires:, 4.0 oz (113.4g), Weight w/o wires:, 2.5 oz (70.9g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, Battery and motor connectors sold separately, Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires., *RC HOBBY APPLICATION RATING: 75 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.,
With the debut of the Phoenix Edge series of ESCs ...ReadyMadeRC
DJI NAZA-M V2, MAIN CONTROLLER, PMU LED, NO GPS
What’s new with the NAZAM V2 | Hardware |
What’s new with the NAZAM V2 | Firmware and functions |
Motor Disarm | There are two modes of Motor Disarm |
VU Input | 7.4V ~ 26.0 V |
Output(V-SEN port red wire) | 3A@5V |
(burst current | 7.5A) |
MAX | 3.15W(0.25A@12.6V) |
Normal | 1.638W(0.13A@12.6V) |
Vertical | ±0.8m |
Horizontal | ±2.5m |
PMU | 28g |
GPS | 27g |
LED | 13g |
PMU | 39.5mm x 27.5mm x 10.0mm |
LED | 25mm x 25mm x 7.0mm |
Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Can not be back-ordered. PMU V2 - New case design ...ReadyMadeRC
DJI NAZA-M V2 MULTIROTOR AUTOPILOT W/GPS
What’s new with the NAZAM V2 | Hardware |
What’s new with the NAZAM V2 | Firmware and functions |
Motor Disarm | There are two modes of Motor Disarm |
VU Input | 7.4V ~ 26.0 V |
Output(V-SEN port red wire) | 3A@5V |
(burst current | 7.5A) |
MAX | 3.15W(0.25A@12.6V) |
Normal | 1.638W(0.13A@12.6V) |
Vertical | ±0.8m |
Horizontal | ±2.5m |
PMU | 28g |
GPS | 27g |
LED | 13g |
PMU | 39.5mm x 27.5mm x 10.0mm |
LED | 25mm x 25mm x 7.0mm |
Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
PMU V2 - New case design with CANBUS port. Enhanced ...ReadyMadeRC
FLIP 360 FPV FRAME (BLACK/ORANGE)
Frame weight | only 290 grams. |
Recommended motor size | 28mm 1000kv - 1300kv |
Recommended battery | 3s 2200mah - 3s2800mah |
Frame Size Motor to Motor | (Length) 9-1/8" (233mm) x (Width) 12" (306mm) (H style motor configuration) |
Frame Physical Size | 12"L (306mm) x 12-1/8"W (310mm) x 3.5"H (89mm) |
Max prop size: 8", A few recommended motors:, Tiger Motor MS2208-18 1100KV, INCLUDES:, FRAME, HARDWARE, LANDING GEAR, BATTERY STRAP, AND HEX DRIVER.,
The new FLIP 360 is designed to be an extremely ...ReadyMadeRC
FLIP FPV FRAME PRO-GIMBAL (BLACK/GREEN)
Size | Width 14.5" (375mm) Length 11" (280mm) |
Weight | 16oz |
Diagonal Measurement (diagonally motor to motor) | 450mm |
Recommended Gimbal and Controller:, ToughBG,
*Contains frame with 2 black and 2 green arms The ...ReadyMadeRC
FLIP FPV FRAME PRO-GIMBAL (BLACK/ORANGE)
Size | Width 14.5" (375mm) Length 11" (280mm) |
Weight | 16oz |
Diagonal Measurement (diagonally motor to motor) | 450mm |
Recommended Gimbal and Controller:, ToughBG,
*Contains frame with 2 black and 2 orange arms The ...ReadyMadeRC
LADYBIRD V2 BNF (NO TRANSMITTER)
Note | BNF version does not include a radio transmitter! You must use a Walkera transmitter. |
1). Dimensions | 8.5*8.5cm |
2). Height | 3cm |
3). Weight | 33g |
4). Motors (x4) | 0720RN57A-9M-130NL52 |
5). Receiver | RX2643H-D |
6). Battery | 3.7V 240mAh |
7). Radio range | <=100m |
8). Flight time | 6-8min |
9). Standard transmitter | DEVO 4 |
10).Optional transmitter | DEVO 6/7/8s/10/12s |
3). Compatible with DEVO series radio | Devo 12S/8S/10/7/7E/6S/2402D.Cute and lifelike appearance similar to Ladybird. |
ReadyMadeRC
FLIP 360 FPV FRAME (BLACK/GREEN)
Frame weight | only 290 grams. |
Recommended motor size | 28mm 1000kv - 1300kv |
Recommended battery | 3s 2200mah - 3s2800mah |
Frame Size Motor to Motor | (Length) 9-1/8" (233mm) x (Width) 12" (306mm) (H style motor configuration) |
Frame Physical Size | 12"L (306mm) x 12-1/8"W (310mm) x 3.5"H (89mm) |
: The arms are black and green., Max prop size: 8", A few recommended motors:, Tiger Motor MS2208-18 1100KV, INCLUDES:, FRAME, HARDWARE, LANDING GEAR, BATTERY STRAP, AND HEX DRIVER.,
NOTE The new FLIP 360 is designed to be an ...ReadyMadeRC
DJI E600 TUNED PROPULSION SYSTEM FOR QUADCOPTERS
E300/E600 specifications:, , PROPELLER:, 20% ~ 25% efficient, carefully balanced., 2212 / 3508 MOTOR:, Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors., 15A/20AESC:, Improved ESC along with new highly efficient and quick response algorithms, providingextra maneuverability and stability in wind and during descending.By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors., Accessories pack now available within the package:, What’s inside? Power Hub, Compatibility VS Size of Craft:,
E300/E600 The E series tuned propulsion system is the first ...ReadyMadeRC
DJI E600 TUNED PROPULSION SYSTEM FOR HEXACOPTERS
E300/E600 specifications:, , PROPELLER:, 20% ~ 25% efficient, carefully balanced., 2212 / 3508 MOTOR:, Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors., 15A/20AESC:, Improved ESC along with new highly efficient and quick response algorithms, providingextra maneuverability and stability in wind and during descending.By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors., Accessories pack now available within the package:, What’s inside? Power Hub, Compatibility VS Size of Craft:,
E300/E600 The E series tuned propulsion system is the first ...ReadyMadeRC
F4U-1A CORSAIR PNP
Wingspan | 44.0 in (1120mm) |
Overall Length | 36.0 in (915mm) |
Motor Size | 15-size 950Kv brushless outrunner (installed) |
Radio | 4+ channel minimum radio system required (6+ for flaps and retracts) |
Prop Size | 9.5 x 7.5 |
Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po |
Flaps | Optional |
Retracts | Optional |
Control Throw (Ailerons) | Low |
Control Throw (Elevator) | Low |
Control Throw (Rudder) | Low |
Control Throw (Flaps) | Half |
Minimum Age Recommendation | 14 years |
Experience Level | Intermediate |
Recommended Environment | Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...