Skip to content

Flying-Hobby

GRYPHON AUTO BOOSTER REMOTE OPERATED GLOW IGNITER

- Operating Voltage4.8V to 7.4V, User Selectable
- Idle Current Drain20mA
- Working Current Drain650mA
- Size10mm x 40mm x 23mm (HxWxL)
- Weight20g With Cables

Overview:, The Gryphon Auto Booster is a remote operated glow ignition device. Sleek design encased in a durable plastic shell, the Auto Booster tends to make a nice addition to any Nitro helicopter, airplane car, or even boat for easy glow plug ignition., Specs:, Features:, - Glow plug can be remotely ignited with a transmitter by using a receiver channel (Gear, AUX, etc),

- The glow ignition operation can increase engine power rapidly ...

Flying-Hobby

GRYPHON EXTREME-HELI DC-DC VOLTAGE REGULATOR SILVER

Product DetailsSpecifications
- Input voltage6 to 10 Volts (5 to 8 cell NiCd/MH or 2cell LiFe/Po)
- Output voltageServo channel 5.2V, 6.0V, 6.8V, 7.4V, 8.4V(Bypass)
- Output currentServo channel 10A(MAX15A @6.0V)
- Low voltage alarm setupLiFe type(6.5V) LiPo type(7.3V) Enable to setup
- Switch typeFail safe(Fail-Safe-On) Pin-flag Contactless Type
- Power connector typeDINS Connector Type
- Size17mm(H) x 40mm(W) x 64mm(L)
- Weight45g (Excluding cables)
- ComponentsMain unit 1EA, RX cable 4EA, Switchboard & Cable 1EA,
Signal terminallow voltage alarm output
+ terminalthe same voltage output as servo channel
- terminalcommon ground

☞ The case that the servo specifications are the same : If operating voltage specifications of four channel servos are all the same, all four channels are connected., ☞ The case that the servo specifications are different : If it is used three CCPM(6.0V) and a throttle servo(4.8V) mixed with devices such as governor, the throttle servo should be used to directly connect with the receiver.,

RX channel 5.2V(Fixed) RX channel 5A(MAX10A) Operating guide Features ◆ ...

Flying-Hobby

GRYPHON EXTERNAL BUZZER

,

Product Details GEB-1010 Gryphon External Buzzer This optional accessory for ...

Flying-Hobby

SAVOX SC-1257TG DIGITAL SERVO

Dimensions40.3 x 20 x 37.2mm
Weight52.4g
Speed (sec/60°)0.07
Torque (kg-cm/oz-in)10.0/138.8
GearTitanium & Aluminium
CaseAluminium
The new SC-1257 standard size coreless digital servo is leading ...

Flying-Hobby

SOLO PRO V1 2.4GHZ RTF PACKAGE (RED)

Features:, , Specifications:, , Package Includes:,

********can not ship to Turkey and Belgium( as the custom ...

Flying-Hobby

SAVOX SH-1290MG DIGITAL SERVO

Stellzeit bei 4,8 V0,059 sec/60 Grad
Immersion time at 4.8 V0.059 sec/60 degrees
Stellzeit bei 6,0 V0,048 sec/60 Grad
Immersion time at 6.0 V0.048 sec/60 degrees
Stellkraft bei 4,8 V40 Ncm
Force at 4.8 V40 Ncm
Stellkraft bei 6,0 V50 Ncm
Force at 6.0 V50 Ncm
Gewichtca. 56,0 g
Weightapprox 56.0 grams
Abmessungenca. 40,3 x 20,0 x 37,2 mm
Dimensionsapprox 40.3 x 20.0 x 37.2 mm

Technische Daten Savox SH-1290 MG:, Specifications Savox SH-1290 MG:, ,

Description Das Savox SH-1290 MG ist ein ultra schnelles Digitalservo ...

Flying-Hobby

SAVOX SC-1256TG DIGITAL SERVO

Dimensions40.3 x 20 x 37.2mm
Weight52.4g
Speed (sec/60°)0.15
Torque (kg-cm/oz-in)20.0/277.6
GearTitanium & Aluminium
CaseAluminium
The new SC-1256 standard size coreless digital servo is leading ...

Flying-Hobby

HOBBYWING-UBEC 5V/6V 3A(SWITCHING)

1.Output5V/3A and 6V/3A switchable
2.Ripple<50mVp-p(@2A/12V)
3.Input5.5V-23V (2-5S lithium battery pack,5-15 cells NiMh/NiCd pack)
4.Size41.6mm*16.6mm*7.0mm (length*width*height)
5.Weight6g(input and output cables not included); 8g(cables included)

Specification:,

Why do you need to use UBEC? The UBEC is ...

Flying-Hobby

SCORPION BEARING SET FOR HK-4035 V2

,

Product Details In order to keep your motor in top ...

Flying-Hobby

HOBBYWING UBEC-5A-HV (HIGH VOLTAGE)

Continuous output current5 Amps
Burst output current7.5 Amps
Input8V-42V (
Quiescent current20mA
Weight37g

Output Voltage:, 5V or 6V (Changeable with an output-voltage select switch ), Size:, 48mm*27mm*9mm (length*width*height),

The 5A-HV-UBEC is a switch-mode DC-DC regulator supplied with a ...

Flying-Hobby

T-REX 500 - 0.6M 15T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS

,

For pinions as tough as a Rhinoceros! Try our new ...

Flying-Hobby

T-REX 500 - 0.6M 12T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS

,

Product Details For pinions as tough as a Rhinoceros! Try ...

Flying-Hobby

T-REX 500- 0.6M 14T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS

,

Product Details For pinions as tough as a Rhinoceros! Try ...

Flying-Hobby

EDGE 423MM PREMIUM CF BLADES - FLYBARLESS VERSION

Specs- Length
- Width42mm
- Root10mm
- Bolt Hole3mm
- Weight~ 65 grams per blade

Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,

EDGE high performance CF rotor blades are new premium blades ...

Flying-Hobby

EDGE 693MM PREMIUM CF BLADES - FLYBARLESS VERSION

Specs- Length
- Width60mm
- Root12mm
- Bolt Hole5mm
- Weight~ 185 grams

Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,

EDGE high performance CF rotor blades are new premium blades ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby