ReadyMadeRC
PARKZONE - F4U-1A CORSAIR BNF PKZ6080
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | AR600 6-channel DSMX® receiver (installed) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po (included) |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Charger | 2- to 3-cell DC variable rate Li-Po charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - SPORT CUB BNF PKZ6880
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (included) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
APPRENTICE S 15E RTF WITH SAFE EFL3100
| Wingspan | 59.0 in (1500mm) |
| Overall Length | 42.5 in (1080mm) |
| Wing Area | 515 sq. in. (33.2 sq. dm.) |
| Flying Weight | 49.0 oz (1390 g) |
| Motor Size | 15-size brushless outrunner |
| Radio | Spektrum DX5e transmitter (included) |
| CG (center of gravity) | 3-1/8 in (79.0mm) back from the leading edge of wing |
| Prop Size | 11 x 8 |
| Speed Control | 30-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 3200mAh LiPo (included) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Charger | 2–3S LiPo balancing charger, 0.5–3.0A (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features SAFE™ technology provides spatial awareness and flight envelope protection ...ReadyMadeRC
MOSQUITO MK VI PNP
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE ARCHER RTF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | DX4e 4-channel transmitter (included) |
| Servos | SV80 servos (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
SPEKTRUM DX6 6 CHANNEL SYSTEM W/ AR610 RECEIVER
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR610 included |
| Model Memory | 250 |
| Modes | User Selectable Mode 1-4 |
| Transmitter (Tx) Battery Type | 4 AA batteries (Included) |
# of Channels: 6,
The Spektrum™ DX6 has been designed from the ground up ...ReadyMadeRC
BLADE - 180 QX HD BNF WITH SAFE BLH7480A
| Type | Quad-Copter |
| Main Rotor Diameter | 14.0 in (355mm) |
| Gross Weight | 3.35 oz (95 g) |
| Length | 11.5 in (292mm) |
| Motor Size | (4) 8.5mm brushed |
| Kit/ARF/RTF | RTF |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS
,
FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...ReadyMadeRC
HIMAX 3516-1350 BRUSHLESS OUTRUNNER (PENGUIN, OGAR, SKYWALKER)
,
• Heavy duty motor mount, prop adapter & connectors included, ...ReadyMadeRC
SASQUATCH LABS - NARWHAL HEX FRAME
Product Features & Specs:, , Camera Equipment:, , Included Parts:>, Parts Required To Fly:, , Build and Tuning Documentation:,
You could say that this frame is what really brought ...ReadyMadeRC
HS-485HB
Motor Type:, 3 Pole, Bearing Type:, Top BB, Speed:, 0.20 , 0.17 sec @ 60 deg., Torque:, 72 / 89 (4.8v / 6.0v), : Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface., : Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.,
HS-485HB updates the very popular HS-475HB by adding more torque ...ReadyMadeRC
PRO TRICOPTER DELRIN KIT V1.2
| Frame parts made from precision laser cut Delrin | 3 Motor mounts, complete Yaw mechanism, 2 main body frame parts |
| . Kit frame and motor mounts | 150g, kit hardware |
| Includes all frame and motor mounting hardware | screws, nuts, ball bearings, servo to motor pushrod using ball links, Yaw axle, and stand-offs |
Weight:, Fully flight ready built kit with all electronics, flight controller, motors, escs (without battery) weighs,
Quick Overview The v1.2 Pro Tricopter Delrin Kit by fpvmanuals ...