Flying-Hobby
BL 750H HIGH VOLTAGE BRUSHLESS SERVO
| ●Stall torque | 5.0kg.cm(6.0V) |
| ●Motion speed | 0.045sec/60°(6.0V) |
| ●Rating voltage | DC 4.8-7.4V |
| ●Temperature range | -20°C~+60°C |
| ●Dimension | 40.3 x 20.1 x 38.7mm |
| ●Weight | 66g |
Instruction:, ● Rudder servo with .0.032sec/60° ultra high speed response, pushing the extreme., ● Designed specifically for helicopters, with highest specifications on the market: 0.032sec/60°ultra fast speed and 7kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision., Specification:, Accessories:, ●Servo rudder piece x 3,
● Utilizes brushless motor design for fast speed, high efficiency. ...Flying-Hobby
OUTRAGE BL 9188 HIGH VOLTAGE BRUSHLESS DIGITAL TAIL SERVO
Features:, , Specifications:, , Package Includes:, , NOTE:, This servo is a dedicated tail servo only and will not function as a throttle servo, or when plugged directly into a receiver. Servo is designed to work at a specific pulse rate that the tail gyro sends., For Align GP780 Users:, In order to place the GP780 gyro into 760µs frame rate, the rudder stick,
Product description Outrage TORQ Servos - When Good Just Isn't ...Flying-Hobby
OUTRAGE BL 9180 HIGH VOLTAGE BRUSHLESS DIGITAL CYCLIC SERVO
Features:, , Specifications:,
Outrage TORQ Servos - When Good Just Isn't Enough. Enter ...Flying-Hobby
EDGE 693MM PREMIUM CF BLADES - FLYBAR VERSION
| Specs | - Length |
| - Width | 60mm |
| - Root | 12mm |
| - Bolt Hole | 5mm |
Features:, - Airfoil designed specifically for traditional flybar helicopters., Includes:, - One pair of EDGE blades.,
EDGE high performance CF rotor blades are new premium blades ...Flying-Hobby
SAVOX SH-1357 DIGITAL SERVO
| Stall torque | 1.9kg.cm(4.8V) |
| Motion speed | 0.09sec/60°(4.8V) |
| Rating voltage | DC 4.8-6V |
| Temperature range | -20°C~+60°C |
| Dimension | 35 x 15 x 29.2mm |
| Weight | 25.9g |
Flying-Hobby
SAVOX SH-1350 DIGITAL SERVO
| Stall torque | 3.7kg.cm(4.8V) |
| Motion speed | 0.13sec/60°(4.8V) |
| Rating voltage | DC 4.8-6V |
| Temperature range | -20°C~+60°C |
| Dimension | 35 x 15 x 29.2mm |
| Weight | 25.9g |
Specification:,
Best Use for TREX500 .3dx500,EP425 *Coreless Motor Design for fast ...Flying-Hobby
SCORPION PINION GEAR 12T 6MM MODULE 1.0
,
This pinion gear is specificity designed for our HK4035 series ...Flying-Hobby
SCORPION PINION GEAR 10T 6MM MODULE 1.0
,
This pinion gear is specificity designed for our HK4035 series ...Flying-Hobby
SCORPION PINION GEAR 11T 6MM MODULE 1.0
,
This pinion gear is specificity designed for our HK4035 series ...Flying-Hobby
BERG 7P PROGRAMMABLE RECEIVER(72MHZ)
| Outputs | 1-2-3-4-5-6-7 |
| Channels | Any 7 of channels 1-9 |
| Filtering | Triple tuned RF circuitry |
| Filtering | Steep flank 8 pole IF ceramic filter set |
| Filtering | True DSP filtering in the microprocessor decoder with adaptive |
| Sensitivity | Better than 1.2uV |
| Size | 85 x 1.25 x .5" |
| Weight | (w/wires) .28 oz (8g) |
| Crystal | Berg Micro ONLY |
Additional Features:, Programmable Fail Safe, *Note: If a similar transmitter on the same channel is powered up and is CLOSER to your receiver than your own transmitter, loss of signal/fail safe may be experienced., No. of channels : 7,
Berg 7P Programmable Receiver The standard of excellence in receiver ...Flying-Hobby
PNEUMATIC RECTRACT LANDING GEAR SET - MICRO
| ~ Each Retract Weight | 10 gram / All Parts 100 gram |
Specifications :, ~Low Profile 0.472" (12mm) when retracted,
~Frames 6061-T6 & 7075 aviation grade aluminium ~Air used up. ...Flying-Hobby
EDGE 60MM SE PREMIUM CF TAIL ROTOR BLADES
| Specs | - Length |
| - Width | 17.5-20mm |
| - Root | 2.5mm |
| - Bolt Hole | 2mm |
Features:, - Airfoil designed specifically for high speed tail rotor application., Includes:, - One pair of EDGE blades.,
LE-60SE EDGE 60mm SE Premium CF Tail Rotor Blades EDGE ...Flying-Hobby
WALKERA UP02 SOFTWARE UPGRADE ADAPTOR
| 3. Single wire | Plug the jack with yellow, blue and black single wire to the standard receivers for upgrade. |
1. 4 cores jack: Plug the jack with black, blue, yellow and red four different colors’ wire to the receiver’s 4 cores jack which is 1.25 mm space between the 4 cores., 2. 3 cores jack: Plug the jack with black, blue and red three different colors’ wire to the receiver’s 3 cores jack which is 1.25 mm space between the 3 cores.,
This upgrade tool used for DEVO-7 radio and some receivers ...Flying-Hobby
DJI S800 ESC (RED LED)
| TECHNICAL SPECS | Current |
| Voltage | 6S LiPo |
| Signal Frequency | 30Hz ~ 450Hz |
| Drive PWM Frequency | 24KHz |
| Weight | 18g |
Flying-Hobby
DJI S800 ESC (GREEN LED)
| TECHNICAL SPECS | Current |
| Voltage | 6S LiPo |
| Signal Frequency | 30Hz ~ 450Hz |
| Drive PWM Frequency | 24KHz |
| Weight | 18g |