RCModelScout.

ReadyMadeRC

XOAR PJN - 9X5 (1 PC)

Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,

ReadyMadeRC

AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS

Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , ​​Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,

ReadyMadeRC

CHIMERA FLYING WING - BASIC KIT

Specifications:, , Both the PRO and Standard version come with the following:, , The Pro comes with these extras:, , Motor:, I recommend a 400-600 Watt motor. More power is fun, but anything over 700Watts is more than you need with this airplane and will reduce flight times. I personally use a 3015 - 1640kv and 8X prop. A large 1500 kV and 9X5 or 9X6 would do well also., Servos:, The pro has cuts for 12 gram metal gear servos (I like the Corona 939MG's, personally). However a larger servo can be beneficial such as the Hitec HS82MG. I recommend a metal gear servo as the elevons are solid wood and can strip a servo in a wreck., Average flight expectations:, , Build Tutorial:,

ReadyMadeRC

CHIMERA FLYING WING - PRO KIT (GOPRO HOUSING, LINKAGES)

Specifications:, , Both the PRO and Standard version come with the following:, , The Pro comes with these extras:, , Motor:, I recommend a 400-600 Watt motor. More power is fun, but anything over 700Watts is more than you need with this airplane and will reduce flight times. I personally use a 3015 - 1640kv and 8X prop. A large 1500 kV and 9X5 or 9X6 would do well also., Servos:, The pro has cuts for 12 gram metal gear servos (I like the Corona 939MG's, personally). However a larger servo can be beneficial such as the Hitec HS82MG. I recommend a metal gear servo as the elevons are solid wood and can strip a servo in a wreck., Average flight expectations:, , Build Tutorial:,

ReadyMadeRC

SASQUATCH LABS - HOVERTHINGS FLIP SPORT - PNP

Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun.  :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,

ReadyMadeRC

SASQUATCH LABS / HOVERTHINGS FLIP FPV PRO

Product Features & Specs:, , Camera Equipment:, , Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,

ReadyMadeRC

SASQUATCH LABS / HOVERTHINGS FLIP SPORT PRO

Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun.  :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,

ReadyMadeRC

AIMDROIX ALUMINUM EXTENDED ARM FOR DJI MULTIROTORS V1.0 (BLACK)

Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,

ReadyMadeRC

AIMDROIX ALUMINUM EXTENDED ARM FOR DJI MULTIROTORS V1.0 (RED)

Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,

ReadyMadeRC

AIMDROIX ALUMINUM EXTENDED ARMS FOR DJI - V1.0 - HEX PACKAGE

Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,

ReadyMadeRC

AIMDROIX ALUMINUM EXTENDED ARMS FOR DJI - V1.0 - QUAD PACKAGE

Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,

ReadyMadeRC

VAS WRAITH - BASIC KIT

Wraith:, , Recommended prop size: 7”, What’s included in the kits:,

ReadyMadeRC

VAS SPECTER V3 - BASIC KIT

Specter:, , What’s included in the kits:,

ReadyMadeRC

FLIP FPV FRAME PRO (BLACK/GREEN)

ReadyMadeRC

FLIP FPV FRAME PRO (BLACK/ORANGE)