ReadyMadeRC
SKY-HERO - SPYDER 700MM QUAD, X8 KIT
| Weight | ± 880g |
Spyder X4/X8 Features:, , Note:, Kit does not include Motors, ESC's, Flight Controller, Batteries, etc.,
The SKY-HERO Spyder is breaking the mold when it comes ...ReadyMadeRC
SKY-HERO - SPY 600MM Y6 KIT
| Weight | ± 720g |
Spy Y6 Features:, , Note:, Kit does not include Motors, ESC's, Flight Controller, Batteries, etc.,
The SKY-HERO Spy is breaking the mold when it comes ...ReadyMadeRC
PARKZONE - T-28 TROJAN PNP PKZ4475
| Aileron | 3/8 inch (9.5mm) |
| Elevator | 1/2 inch (13mm) |
| Rudder | 5/8 inch (16mm) |
| Aileron | 1/2 inch (13mm) |
| Elevator | 5/8 inch (16mm) |
| Rudder | 7/8 inch (22mm) |
| Wingspan | 44 in (1118mm) |
| Overall Length | 36 in (914mm) |
| Flying Weight | 30 oz (875 g) |
| Motor Size | PKZ 480 960Kv outrunner brushless motor |
| Radio | Minimum 4-channel recommended (not included) |
| Servos | 3-wire servos (included) |
| Trim Scheme Colors | White with black, red, and blue |
| Prop Size | 9.5 x 7.5 |
| Speed Control | E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030) |
| Recommended Battery | Minimum 3-cell 1800mAh Li-Po battery (not included) |
| Scale | Warbird |
| Landing Gear | Wire nose gear and main gear, foam wheels |
| Steering | Steerable nose gear |
All that's needed to complete:, Radio, battery, charger, and receiver, All that's needed to complete:, Radio, battery, charger, and receiver, X-Port: No,
Powerful, High-Performance Historical Warbird Features Steerable nose gear and fixed ...ReadyMadeRC
AIMDROIX EVO ONE - QUAD/X8 MULTIROTOR FRAME
| - Frame Size | 615mm (with extended length arms) |
| -Max props size | 14in |
| - Battery space between plates | 220mm x 53mm x 37 m |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., QUAD Specs:,
Aimdroix EVO ONE Quad The AIMDROIX EVO ONE is the ...ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...ReadyMadeRC
SPEKTRUM DX6I 6 CHANNEL TRANSMITTER ONLY - MODE 2
| - 3 Wing types | normal, dual aileron and delta |
| - 2 Tail types | normal and V-tail |
| - 2 Swashplate types | 1 servo normal, 3-servo 120 |
| Modulation | DSM2®/DSMX® |
| Band | 2.4GHz |
| Programming Features | Helicopter & Airplane |
| Modes | Switchable between Mode 1 and Mode 2 |
| Transmitter (Tx) Battery Type | 4 AA Batteries (Included) |
| Experience Level | Intermediate |
# of Channels: 6, Model Memory: 10, Is Assembly Required: No,
The DX6i is perfect for airplane and heli pilots who ...ReadyMadeRC
EYEFLY - HAMMERHEAD NANO FRAME - G10 GLASS FIBER
| Motors | Tiger MT1306 |
| ESCs | 6A-10A |
| Control unit | CC3D |
| Propellers | GemFan or HQ 5" |
| Camera | FatShark 600tvl |
| Centerplates & motor mounts | 50g |
| Polyamide-parts | 20g |
| Arms | 19g |
| Screws, nuts, etc | 38g |
Our new frame, the "Hammerhead Nano" was designed with the following goals:, , Weight:, ,
The foldable "always-at-hand"-frame that will never leave your side! This ...ReadyMadeRC
GAUI 500X QUAD COMBO W/SCORPION MTRS, ESC, BAG, FRAME, NO GU-344
,
500X Quad Flyer Combo Kit (Including Scorpion Motors, ESCs, Storage ...ReadyMadeRC
FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM
,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
L-C FILTER FOR WIRELESS A/V SYSTEMS
| Manual | PSF-100 |
Note: Installations with severe power supply noise may not be fully cured with this filter. In such cases a shared battery should be avoided., Installation requires soldering in-series with the noisy power supply, as follows:, ,
This compact supply filter helps clean up dirty DC power ...ReadyMadeRC
HORNET OSD + FY31AP (FY-31AP TRADE EDITION)
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| Operating temperature(Unit | ℃) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
HBC3514-2900/PHI 75/APC 6X5.5E COMBO (FUN JET ULTRA)
| Note | picture currently not showing correct package. |
ReadyMadeRC
HB2825-2700/TB36/APC 5.5X4.5E COMBO (FUN JET/STRYKER)
| Note | picture currently not showing correct package. |
| Applications | Speed 400/480 Flying wings, small and fast wings, Multiplex Funjet |
ReadyMadeRC
HB2815-2000/TB36/APC 6X4E COMBO (EASY STAR/SKY SURFER/TWIN STAR)
| Recommended battery | 3s2200mAh lipos such as |
| Applications | Speed 400/480 Flying wings, Park Zone Stryker, Multiplex Easy Star, Twin Star II |
ReadyMadeRC
HB2815-1400/TB18/APC 7X5E COMBO (TWIN STAR II)
| Note | picture currently not showing correct package. |
Applications:, SIG Kadet EP, Rascal EP, GP Super Sportster EP, Multiplez Mini Mag,,
This takes the guessing out of purchasing electric motors. One ...