HiModel
M3*10 RUST RESISTANCE METAL ENGINE CAP SCREWS (10PCS)
, , , , , , Specifications:, , , , , , , , , , , M3*10mm, , ,
Includes/Requires: Includes: 10 x M3*10mm Cap Screw 10 x Spring ...HiModel
RCEXL AUTOMATIC ADVANCING ANGLE IGNITION (CDI) FOR PETROL ENGINE
| POWER SUPPLY | 4.8V / 6.0V |
, , , , , , Specifications:, , , , , , , , , , , MAXIMUM RPM (approximately) 10,000 RPM, MICROPROCESSOR CONTROLLED TIMING, WEIGHT (approximately)=4.0 oz., SYSTEM IS FULLY SHIELDED, CAPACITIVE DISCHARGE, , ,
Features: RCEXL Automatic Advancing Angle Ignition (CDI) From professional CDI ...8 Reviews
HiModel
RCEXL IGNITION TACHOMETER FOR PETROAL/GAS ENGINE V2.0
| 5. Input voltage range | 3.0V-12V |
| 9. Body Size | 54mm L x 20mm W x 16mm H |
| 10.Window Size | 30mm L x 15mm H |
| 11.Weight | 15g (0.5OZ) |
Features:, , Instructions:, 1.The Y wiring tandem between in the HALL sensor and the ignition., Note:, That connecting plugs do Reinforcement. To prevent vibration., Note:, Can not guarantee that other types of ignition can use the tachometer And guarantee accuracy,
1. Use PIC16f628a microcontrollers 2. Do not need batteries,Power from ...3 Reviews
HiModel
D5 X L30MM STAND-OFFS FOR PETROL ENGINE (4PCS)
| Size | 5 x 30mm |
| Outer diameter | 12mm |
| Weight | 24.1g/0.85oz (4pcs) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:4 x stand-offsHiModel
D5 X L60MM STAND-OFFS FOR PETROL ENGINE (4PCS)
| Size | 5 x 60mm |
| Outer diameter | 12mm |
| Weight | 45.2g/1.59oz (4pcs) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:4 x stand-offsHiModel
D6 X L32MM STAND-OFFS FOR PETROL ENGINE (4PCS)
| Size | 6 x 32mm |
| Outer diameter | 17mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:4 x stand-offs1 Reviews
HiModel
SPE 43CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE
| Capacity | 43cc |
| Configuration | 2C single cylinder si cooled |
| Carburetor | Walbro pump |
| Ignition | CDI Electronic ignition w/Auto timing advance |
| Power supply | 4.8-18V |
| Weight | 3.2 lbs including ignition and muffler/51oz |
| Maximum output | 3.4 BHP |
| Maximum RPM | 9000 |
| Idle RPM | 1300 |
| Fuel | Unleaded |
| OIL | 2 CYCLE HIGH PERFORMANCE |
| Prop selection | 18x8-21x8 |
, , , , , , Specifications:, , , , , , , , , , , MIX:1:30 to 1:50, , ,
3 Reviews
HiModel
SPE 26CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE
| Capacity | 26CC |
| Configuration | 2C single cylinder air cooled |
| Carburetor | Walbro pump |
| Ignition | CDI ignition |
| Power supply | 4.8V-6V |
| Maximum output | 1.7KW/2.3 BHP |
| PETROL/GASOLINE | Unleaded 2 stroke 30 |
| OIL | 2 stroke (synthetic is recommended) |
| Prop selection | 16X8 - 18X10 |
| Static thrust | 18X8 prop >5.5kg |
| Width from outer edge of muffler to edge of carburetor | 15.8cm |
, , , , , , Specifications:, , , , , , , , , , , Weight 1050g including ignition and muffler, Maximum RPM 9000, Idle rpm 1500 RPM, MIX: 1:30 to 1:45, Recommended oil 2C racing oil and mix 1:45, , ,
3 Reviews
HiModel
SPEED 1/10 SCALE NITRO POWERED 4WD RTR 94106
| Round Clearance | 4.5mm |
| Gear Ratio | 5.69 |
| Engine | --------------16cxp |
| Diameter Of Wheel | ----65*26mm |
| Engine size | .18 engine |
| Band availability | 27Mhz |
, , , , , , Specifications:, , , , , , , , , , , Length---------------360mm, Width----------------200mm, Height---------------112mm, Wheelbase------------260mm, Threat---------------195mm, , ,
Features: *Fuel tank with vast capacity, easily to refuel with ...2 Reviews
HiModel
1/10TH SCALE NITRO OFF ROAD MONSTER TRUCK-PIVOT BALL SUSPENSION MODEL NO:94188
| Length | 420mm |
| Width | 330mm |
| Height | 185mm |
| Weight | 2100g (approx.) |
| Gear Ratio | 13.34 |
| F/R Wheel Diameter | 120mm x 60mm |
| Engine | 18cxp |
, , , , , , Specifications:, , , , , , , , , , , Wheelbase 275mm, , ,
Features: 1.Four wheel drive system 2.Front/rear differentials with good quality ...3 Reviews
HiModel
SPEED 1/10 SCALE GAS POWERED 4WD OFF-ROAD TRUCK RTR(S94108)
| Length | 360mm |
| Width | 310mm |
| Height | 185mm |
| Wheelbase | 275mm |
| Tyre Size | 120*60mm |
| Ground Clearance | 30mm |
| Gear Ratio | 14.3 |
| Engine | 18cxp |
| Thread | 150mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: *Fuel tank with vase capacity, easily to refuel with ...1 Reviews
HiModel
HSP 1:10 4WD ON-ROAD NITRO POWERED CAR RTR(S94102)
| Length | 360mm |
| Width | 200mm |
| Wheelbase | 260mm |
| Gear Ratio | 5.69 |
| Diameter of Wheel | 65*26mm |
| Engine | 15cxp |
| Thread | 195mm |
, , , , , , Specifications:, , , , , , , , , , , Height112mm, * The pattern and color of the cover may vary from the picture., , ,
Features: *Fuel tank with vase capacity, easily to refuel with ...1 Reviews
HiModel
HSP 1:10 4WD ON-ROAD NITRO POWERED CAR PIVOT BALL SUSPENSION VERSION RTR(S94122)
| Length | 360mm |
| Width | 200mm |
| Wheelbase | 260mm |
| Gear Ratio | 5.69 |
| Diameter of Wheel | 65*26mm |
| Engine | 15cxp |
| Thread | 195mm |
, , , , , , Specifications:, , , , , , , , , , , Height112mm, * The pattern and color of the body cover may vary from the picture., , ,
Features: THIS IS THE NEW PIVOT BALL SUSPENSION VERSION. *Fuel ...1 Reviews
HiModel
REMZIBI OSD 5HZ GPS FOR FPV
| - Supply power requirement | 2V-30V (ie |
, , , , , , Specifications:, , , , , , , , , , , Remzibi's OSD Technical Data:, - Video voltage measurment range 0-25.2V, - Engine(ENG) voltage measurment range 0-25.2V, - General purpose ADC measurment - Build your own or use off the shelf components for many advanced readings - ie. Temperature, Amps, Air Speed, Prop Speed, RSSI, etc., - Video signals - standard PAL or NTSC, - GPS - any GPS 5V supply with NMEA protocol with TLL standard TX RX signals (however best results and advantages are with dedicated GPS module working 5Hz update position), - Printed OSD board size 29mmx39mm, , ,
Features: ArduPilot's best friend! Remzibi OSD is an incredible, very ...