RCPlanet
O.S. ENGINES 30VG ES ELECTRIC STARTER OSM13966
, Displacement:, 0.298 cu in (5.0cc), Bore:, 0.728" (18.5mm), Stroke:, 0.717" (18.2mm), Practical RPM:, 4,000-36,000, Power Output:, 3.0 PS, 2.96 HP/28,000 RPM, Weight:, 12.7oz (360g), Crankshaft Size:, 1/4-28, Factory Needle Valve Setting:, 2-3/4 turns OPEN from fully closed, Mixture Control Valve Setting:, Needle head flush with the side of ball link housing then back in 1-1/2 turn, Distance Between Mounting Holes Same Side:, 0.83" (21mm), Distance Between Mounting Holes Opposite Side:, 1.4" (37mm), Distance Between Mounting Holes Diagonal:, 2.3" (59mm), Height Bottom of Mounting Tabs to Top of Cylinder Head:, 3.8" (97.7mm), Width of Mounting Tabs:, 1.8" (45mm), Width of Crankcase Below Mounting Ears:, 1.2" (30.8mm), Distance from Front Bearing to end of Crankshaft:, 1.2" (29.5mm), Distance from Center of Engine to Front Bearing:, 1.7" (44mm), Distance from Center of Engine to Backplate:, 1.4" (35.6mm), Needle Settings, High Speed:, 2 3/4 turns out from fully closed, Metering Needle (low speed):, flush with ball link body, then 1.5 turns in, Throttle Stop Screw:, 1/2mm open from fully closed, ,
This is the O.S. Max 30VG (P) ES Electric Start, ...RCPlanet
O.S. ENGINES 1.20 AX W-MUFFLER OSM19210
, Displacement:, 1.218 cu in (19.96cc), Bore:, 1.197" (30.4mm), Stroke:, 1.083" (27.5mm), Practical RPM:, 1,800 - 9,500 RPM, Power Output:, 3.1 PS, 3.06HP/9000 RPM, Weight of engine:, 29.0oz (823g) with muffler, Weight of muffler:, 7.074oz (219.2g) with 90° adapter installed, Weight of muffler:, 7.907oz (245g) with extension installed, Crankshaft thread size:, 5/16-24, Distance Between Mounting Holes Same Side:, 0.98" (25mm), Distance Between Mounting Holes Opposite Side:, 2.3" (58mm), Distance Center of Crankcase to End of Crankshaft:, 4.3" (109.5mm), Distance Center of Crankcase to Drive Hub:, 2.7" (69.8mm), Width Between Mounting Tabs:, 2.6" (67mm), Width of Crankcase Below Mounting Tabs:, 1.8" (46.5), Length from Backplate to End of Crankshaft:, 5.5" (139.9mm), Length from Backplate to Drive Hub:, 3.9" (100.2mm), Height/Bottom of Crankcase to Top of Cylinder Head:, 4.3" (109.2mm), Height/Bottom of Mounting Tabs/Top of Cylinder Head:, 3.4" (85.7mm), Distance center to center of muffler mounting holes:, 48mm (1.89"), Needle Settings, High Speed:, 2 - 2.5 turns out from fully closed, Low Speed:, 3/4 turn out from fully closed with the throttle fully closed, ,
O.S. Max two stroke 1.20AX ringed engine with muffler. Model ...RCPlanet
O.S. ENGINES .95AX RING 61C E4040 OSM19120
, Displacement:, 0.949 cu in (15.55cc), Bore:, 1.091" (27.7mm), Stroke:, 1.016" (25.8mm), Practical RPM:, 2,000-16,000 RPM, Power Output:, 2.9 PS, 2.86 HP/15,000 RPM, Weight:, Engine, 20oz (567g), Weight:, Muffler, 6.28oz (178g), Recommended Props:, 14x8, 15x6-8, 16x6-8, Crankshaft thread size:, 5/16-24, Distance from center of engine to drive hub:, 2.6" (66.6mm), Height from crankcase bottom to top of cylinder head:, 4" (102mm), Height/crankshaft center to top of cylinder head:, 3.2" (81.3mm), Width including mounting tabs:, 2.4" (61mm), Width below mounting tabs:, 1.7" (42.6mm), Width between mounting holes same side:, 0.98" (25mm), Width between mounting holes opposite side:, 2" (52mm), Diameter of muffler body:, 1.8" (45mm), Distance from Center of Engine to Exhaust Outlet:, 4.4" (112mm), Angle of muffler in relation to engine:, 4°, High Speed Needle:, 1.5 - 2 turns out from fully closed, Low Speed Needle:, 2mm gap between the needle and spray bar at full throttle (looking down the neck of the carb), ,
O.S. Max 95 AX ABL Aircraft engine with muffler has ...RCPlanet
O.S. ENGINES .55HZ-H HYPER RING 40L OSM15630
, Displacement:, 0.55 cu in (8.93cc), Bore:, 0.91" (23mm), Stroke:, 0.85" (23.5mm), Practical RPM:, 2,000-17,000 RPM, Output:, 2.1 PS, 2.07 HP, Weight:, 14.39oz (408g), High Speed Needle Valve:, Two turns open from fully closed, Idle Mixture Control Screw:, Factory set-do not adjust, Medium Speed Needle Valve:, Two turns open from fully closed, Distance/top of cylinder head-bottom of mounting tabs:, 2.8" (72.6mm), Distance between mounting holes same side:, 0.68" (17.5mm), Distance between mounting holes opposite side:, 1.73" (44mm), Distance between muffler mounting holes:, 1.4" (37mm), Cylinder Head Diameter:, 1.8" (47mm), Distance/bottom of crankcase to top of cylinder head:, 3.6" (90.9mm), Distance from center of engine to front bearing:, 2.03" (51.6mm), Distance from center of engine to end of Crankshaft:, 3.2" (82.6mm), Distance from center of engine to backplate bolt:, 0.98" (25mm), Distance from center of engine to throttle lever:, 1.5" (38mm), ,
O.S. Engine hyper Ringed helicopter engine is ideal for 3D ...RCPlanet
O.S. ENGINES .46LA NON-RING 40D CARB E3020 MUFFLER OSM13393
| Recommended Props | Break In |
, Construction:, Aluminum 1-piece crankcase, piston, cylinder head, Bore:, 23.0mm (0.906"), Stroke:, 18.4mm (.724"), Horsepower:, 1.2 PS, 1.18 HP at 15,000 RPM, Distance from remote needle to end of crankshaft:, 4.5" (114mm), Distance from center of engine to drive hub:, 2.0" (51.2mm), Distance from center of engine to end of crankshaft:, 3.0" (76.3mm), Height from crankcase bottom to top of cylinder head:, 3.3" (84.7mm), Height/crankshaft center to top of cylinder head:, 2.7" (69mm), Width including mounting ears:, 1.9" (48mm), Width not including mounting ears:, 1.2" (32mm), Width between mounting holes same side:, 0.69" (17.5mm), Width between mounting holes opposite side:, 1.6" (40.5mm), Width between muffler mounting holes:, 1.4" (36mm), Width of exhaust opening:, 1.1" (29mm), Height of exhaust opening:, 0.3" (7mm), Diameter of muffler body:, 1.3" (33.5mm), Angle of muffler in relation to engine:, 4°, Weight:, 272g (9.6oz without muffler), Crankshaft Thread Size:, 1/4-28, 11x6, Trainer and Sport Models:, 11x6, 11x7, Scale Models:, 12x5, 12x6, Practical RPM Range:, 2,000 - 16,000 RPM (This engine will not turn this many RPM on the ground) RPM curve is when the engine unloads., ,
OS .46LA engine has a 1-piece crankcase. Crankshaft is set ...RCPlanet
O.S. ENGINES .25AX ABL 21K E3080 W/MUFFLER OSM12670
, Displacement:, 0.248 cu in (4.07cc), Bore:, 0.709" (18mm), Stroke:, 0.630" (16.0mm), Practical RPM:, 2,500-17,000, Output:, 0.8 PS, 0.79 HP @ 15,000 RPM, Weight:, 12.6oz (357g) with muffler, Recommended Propellers:, 9x5, 9x6, 9.5x5, 10x5, Crankshaft Size:, 1/4-28, Distance from center of engine to drive hub:, 2.1" (53mm), Distance from center of engine to end of crankshaft:, 3.1" (77mm), Width including mounting tabs:, 1.8" (45mm), Crankcase width below mounting tabs:, 1.2" (30.6mm), Width between mounting holes same side:, 0.59" (15mm), Width between mounting holes opposite side:, 1.5" (38mm), Diameter of muffler body:, 1.2" (32mm), Needle Settings, High Speed:, 2 turns out from fully closed, Low Speed:, Flush with carb body then 1/2 turn in, ,
O.S. Engine .25AX ABL Model airplane engine with E-3080 muffler. ...RCPlanet
O.S. ENGINES .21VG(P) W/NEW 21F CARB OSM13644
, Displacement:, 0.211 cu in (3.46cc), Bore:, 0.654" (16.6mm), Stroke:, 0.63" (16.0mm), Practical RPM:, 3,000 - 36,000 RPM, Power Output:, 2.0 PS, 1.97 HP/ 30,000 RPM, Weight:, 12.24oz (347g), Distance Between Mounting Holes Same Side:, 0.83" (21mm), Distance Between Mounting Holes Opposite Side:, 1.4" (37mm), Height Bottom of Mounting Tabs/Top of Cylinder Head:, 3.4" (87.4mm), Width of Mounting Tabs:, 1.8" (45mm), Distance from Backplate to Front Bearing:, 2.6" (65.6mm), Distance from Center of Engine to Front Bearing:, 1.7" (44mm), Distance from Center of Engine to Backplate:, 0.85" (21.6mm), Needle Settings, High Speed:, 3 turns out from fully closed, Metering needle (low speed):, flush with ball link body, Throttle Stop Screw:, 1/2 turn out from fully closed, ,
O.S. Engine Max .21 VG-P Pilot Shaft Sport Engine with ...RCPlanet
HPI ENGINE MOUNT SAVAGE 21 HPI86060
, C.D. between engine mounting holes:, 21mm (same side), C.D. between engine mounting holes:, 37mm (across sides), ,
HPI Racing stock replacement engine mount for the Savage. This ...RCPlanet
HPI K5.9 ENGINE HPI15250
, Displacement:, .36 cu in (5.9cc), Carburetor Settings, High Speed Needle:, Flush with groove, Low Speed and Mid Range Needle:, Flush with carb body, Idle Adjustment Screw:, Set after high speed needle is adjusted-set high enough to keep engine running smoothly but not engage the clutch or turn the wheels. Refer to manual for more detailed carburetor setting info, Height from Crankcase Bottom to top of Cylinder Head:, 4.4" (112mm), Height/bottom of Mounting Tab to top of Cylinder Head:, 3.8" (97.5mm), Distance between Mounting Hole Centers Same Side:, 0.87" (22mm), Distance between Mounting Hole Centers Opposite Side:, 1.5" (38mm), Length from Starter to end of Crankshaft:, 4.4" (112mm), Length from Starter to Front Bearing:, 3.3" (83mm), Width at Mounting Tabs:, 1.8" (45mm), Diameter of Cooling Head:, 2.4" (60mm), ,
HPI Racing K5.9 Big Block Engine with pull starter. Fits ...RCPlanet
HPI NITRO STAR T-15 ENGINE WITH PULL START HPI15101
, Carburetor:, Rotary type, 6mm, Ports:, 3, Weight:, 10.2oz (290g), Displacement:, .15 cu in (2.49cc), Horse Power:, 1.2hp @ 29,000 RPM, Bore:, 15.0mm, Stroke:, 13.6mm, Distance between mounting holes front to back:, 0.43" (11mm), Distance between mounting holes side to side:, 1.2" (31.5mm), Overall width including mounting flanges:, 1.6" (40mm), Overall height from bottom of crankcase to top of head:, 3.9" (100mm), Overall length from back of recoil to end of shaft:, 3.5" (88mm), Diameter of head at largest point:, 1.9" (49mm), Length of shaft:, 0.75" (19mm), Length of threaded portion of shaft:, 0.47" (12mm), Distance between exhaust mounting holes:, 1.1" (27.2mm), This engine also includes mounting holes in the bottom of the crankcase. The specs for these are as follows., Distance between mounting holes side to side:, 0.72" (18.2mm), Distance between mounting holes front to rear:, 0.83" (21mm), , ,
HPI Racing Nitro Star .15 cu in (2.49cc)T-15 Pull Start ...RCPlanet
ESTES D-REGION TOMAHAWK ROCKET KIT EST2037
, Length:, 38.8" (98.6cm), Diameter:, 1.8" (45.7mm), Weight:, 9.2oz (260g), Recovery:, 18" Parachute, Max Altitude:, 787ft (240m), ,
Estes Tomahawk is a 1/5th scale model of the "sounding" ...RCPlanet
ESTES ASTRON SKY DART II LEVEL 3 EST3229
, Skill level:, 3, Length:, 15.4" (39.1cm), Diameter:, .98" (25mm), Wingspan:, 12.5" (31.8cm), Weight:, 3.1oz (87.9g), Recovery System:, Parachute and glider, Projected Altitude:, 500ft (152m), ,
This is the Estes Astron Sky Dart II Level 3 ...RCPlanet
ESTES ZINGER MINI KIT E2X EASY-TO-ASSEMBLE EST2433
, Skill level:, E2X - Easy to Assemble, Length:, 15" (38.1cm), Diameter:, .74" (19mm), Weight:, .9oz (25.5g), Recovery System:, Parachute, Projected Altitude:, 500ft (152m), ,
This is the Estes Zinger Mini E2X (Easy-to-Assemble) Rocket Kit. ...RCPlanet
ESTES ALPHA EDUCATOR PACK 12 EST1756
, Length:, 12.3" (31.1cm), Diameter:, 0.98" (24.8mm), Weight:, 0.8 oz. (22.6g), Recovery:, Parachute, ,
Estes package of twelve Alphas is an easy to build, ...