Hobby-Lobby
F4F WILDCAT BNF
| Wingspan | 38.4 in (975mm) |
| Overall Length | 28.7 in (730mm) |
| Flying Weight | 25.4 oz (720 g) |
| Servos | 4 Installed Servos |
| Speed Control | 18Amp ESC Installed |
| Approx. Flying Duration | 7-10 minutes |
| Needed to complete | 4+ Ch. Radio System |
F4F Wildcat BNF Features:, Ready to fly in minutes with full 4-channel control – throttle, aileron, elevator and rudder, F4F Wildcat BNF Specs:, Motor Size:, 480-sized 960Kv brushless outrunner (installed), CG (center of gravity):, 1-7/8 in (47mm) back from LE of wing at root, +/- 1/8 in (3mm), Experience Level:, Intermediate,
The legendary Wildcat as a Bind-N-Fly park flyer From Pearl ...Hobby-Lobby
P-51 MUSTANG MK II PTS RTF (OVERSIZE)
| Needed to Complete | Fuel (10% to 15% nitro content), Glow Plug Wrench, Glow Plug Igniter with Charger |
| Glow Plug, Manual Fuel Pump, Flat blade screwdriver, Hex wrench | 3/32 in or 2.5mm, Felt-tipped pen, Adjustable wrench, Phillips screwdriver, Pliers |
| Length | 50.39 in (1280mm) |
| Experience Level | Beginner |
P-51 Mustang MkII PTS RTF Highlights:, Ready-to-fly right from the box, Technical Specifications:, P-51 Mustang MkII PTS RTF Specs:, Wingspan:, 58.25 in (1479.55mm), Flying Weight:, 6.5�7 lb (2.95�3.18 kg), Engine Size:, Evolution Trainer Power System (installed), Radio:, Spektrum 2.4GHz DX6i DSM2 radio with AR6200 receiver (installed),
A Beloved Classic Designed With the Beginner in Mind Hangar ...Hobby-Lobby
UMX BEAST 3D BNF BASIC WITH AS3X TECHNOLOGY
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
UMX Beast 3D Highlights:, AS3X System for outstanding precision and 3D flight, Technical Specifications:, Wingspan:, 14.7 in (374mm), Overall Length:, 15.7 in (400mm), Wing Area:, 83.8 sq. in. (54.2 sq. dm.), Flying Weight:, 2.54 oz (72 g), Motor Size:, BL180 2,500Kv brushless outrunner, Radio:, 4 channel minimum, Trim Scheme Colors:, Black, Red, Silver, CG (center of gravity):, 19mm back from L.E. of bottom wing, Wing Loading:, 3.4 oz/sq ft (1.01 g/sq dm), Prop Size:, 5 x 2.75 inch, Recommended Battery:, 2S 7.4V 180mAh LiPo, Control Throw (Ailerons):, Control Throw (Elevator):, Control Throw (Rudder):, Approx. Flying Duration:, 5 minutes, Minimum Age Recommendation:, 14 years, Experience Level:, Intermediate, Recommended Environment:, Indoor/Outdoor, Is Assembly Required:, No,
Seize the UMX Beast 3D, Equipped with AS3X, and Control ...Hobby-Lobby
WING DRAGON HL RTF TRAINER
,
Terrific beginners plane with brushless motor, 2.4 GHz radio - ...Hobby-Lobby
12 FOOT TELEMASTER ARF W/DROP BOX (OVERSIZE)
Technical Specifications:, Length:, 90", Wingspan:, 12 Feet!, Flying Weight:, 31 lbs., Controls:, Ailerons, Elevator, Rudder, Throttle, Flaps, Drop Box, Wing Area:, 3050 sq. in.,
HUGE, Ready-Built version of the 12 Foot Telemaster For the ...Hobby-Lobby
MICRO-TELEMASTER KIT V2
Technical Specifications:, Length:, 24", Wingspan:, 34-1/2", Flying Weight:, 6-9 oz., Controls:, Rudder, Elevator, Throttle, Wing Area:, 186 sq. in., Wing Loading:, Less than 7oz. per sq. ft.,
A quick and easy to build all laser cut precision ...Hobby-Lobby
ERC 65A BRUSHLESS PROGRAMMABLE ESC W/SBEC
Jason Says:, "We tested these ESC's for months before bringing them in. I fully trust eRC speed controllers in all my aircraft.", 30x56x11mm, 58g programmable controller with a voltage adjustable (5, 5.5, 6V output) 5A Switch Mode BEC circuit. Suitable for use with 2-6 Lipo cells. Programmable functions are: Brake on/off (soft, mid or hard braking), Battery Type (LiPo, LiFe, NiCad, NiMh), Battery Cutoff Threshold (low, med, high), Motor Timing (2,8,15,22,30 degrees), Motor Rotation (forward/reverse), Soft Acceleration (low, med, high), Voltage Cutoff (reduce power/cut power). All functions can be programmed through your transmitter or much more quickly and easily with the eRC Electronic Programmer (ERCE02) sold separately. Comes pre-connected with 3.5mm bullet connectors and a Deans Ultra Plug and includes a matching set of male 3.5mm bullet connectors.,
High Performance Programmable Brushless Speed Controllers Economically priced HIGH performance ...Hobby-Lobby
ERC 45A BRUSHLESS PROGRAMMABLE ESC W/SBEC
Jason Says:, "We tested these ESC's for months before bringing them in. I fully trust eRC speed controllers in all my aircraft.", 30x56x11mm, 58g programmable controller with a voltage adjustable (5, 5.5, 6V output) 5A Switch Mode BEC circuit. Suitable for use with 2-6 Lipo cells. Programmable functions are: Brake on/off (soft, mid or hard braking), Battery Type (LiPo, LiFe, NiCad, NiMh), Battery Cutoff Threshold (low, med, high), Motor Timing (2,8,15,22,30 degrees), Motor Rotation (forward/reverse), Soft Acceleration (low, med, high), Voltage Cutoff (reduce power/cut power). All functions can be programmed through your transmitter or much more quickly and easily with the eRC Electronic Programmer (ERCE02) sold separately. Comes pre-connected with 3.5mm bullet connectors and a Deans Ultra Plug and includes a matching set of male 3.5mm bullet connectors.,
High Performance Programmable Brushless Speed Controllers Economically priced HIGH performance ...Hobby-Lobby
ERC 35A BRUSHLESS PROGRAMMABLE ESC W/BEC
Jason Says:, "We tested these ESC's for months before bringing them in. I fully trust eRC speed controllers in all my aircraft.", Compact (28x38x8mm) and light (35g) yet very capable programmable controller with 5V/3A BEC circuit. Suitable for use with 2-4 Lipo cells. Programmable functions are: Brake on/off (soft, mid or hard braking), Battery Type (LiPo, LiFe, NiCad, NiMh), Battery Cutoff Threshold (low, med, high), Motor Timing (2,8,15,22,30 degrees), Motor Rotation (forward/reverse), Soft Acceleration (low, med, high), Voltage Cutoff (reduce power/cut power). All functions can be programmed through your transmitter or much more quickly and easily with the eRC Electronic Programmer (ERCE02) sold separately. Comes pre-connected with 3.5mm bullet connectors and a Deans Ultra Plug and includes a matching set of male 3.5mm bullet connectors.,
High Performance Programmable Brushless Speed Controllers Economically priced HIGH performance ...Hobby-Lobby
ERC 25A BRUSHLESS PROGRAMMABLE ESC W/BEC
Jason Says:, "We tested these ESC's for months before bringing them in. I fully trust eRC speed controllers in all my aircraft.", Compact (28x28x8mm) and light (30g) yet very capable programmable controller with 5V/2A BEC circuit. Suitable for use with 2-4 Lipo cells. Programmable functions are: Brake on/off (soft, mid or hard braking), Battery Type (LiPo, LiFe, NiCad, NiMh), Battery Cutoff Threshold (low, med, high), Motor Timing (2,8,15,22,30 degrees), Motor Rotation (forward/reverse), Soft Acceleration (low, med, high), Voltage Cutoff (reduce power/cut power). All functions can be programmed through your transmitter or much more quickly and easily with the eRC Electronic Programmer (ERCE02) sold separately. Comes pre-connected with 3.5mm bullet connectors and a Deans Ultra Plug and includes a matching set of male 3.5mm bullet connectors.,
High Performance Programmable Brushless Speed Controllers Economically priced HIGH performance ...Hobby-Lobby
ERC 12A BRUSHLESS PROGRAMMABLE ESC W/BEC
Jason Says:, "We tested these ESC's for months before bringing them in. I fully trust eRC speed controllers in all my aircraft.", Compact (21x22x4mm) and light (13g) yet very capable programmable controller with 5V/1A BEC circuit. Suitable for use with 2-4 Lipo cells. Programmable functions are: Brake on/off (soft, mid or hard braking), Battery Type (LiPo, LiFe, NiCad, NiMh), Battery Cutoff Threshold (low, med, high), Motor Timing (2,8,15,22,30 degrees), Motor Rotation (forward/reverse), Soft Acceleration (low, med, high), Voltage Cutoff (reduce power/cut power). All functions can be programmed through your transmitter or much more quickly and easily with the eRC Electronic Programmer (ERCE02) sold separately. Comes pre-connected with 3.5mm bullet connectors and a Deans Ultra Plug and includes a matching set of male 3.5mm bullet connectors.,
High Performance Programmable Brushless Speed Controllers Economically priced HIGH performance ...Hobby-Lobby
SLASH RTR, CHAD HORD #9 BODY
| Needed to complete | 8 AA batteries. |
| Length | 22.4 inches (568mm) |
| Width | 11.7 inches (296mm) |
| Wheelbase | 13.2 inches (335mm) |
| Weight | 4.8 lbs. (2.16kg) |
| Tire Type | Slash 2.2" |
| Speed Control | Waterproof XL-5 ESC |
| Wheel Size | 2.2" |
Features:, Scale dimensions and looks of actual short-course off-road race trucks, Technical Specifications:, Traxxas Slash RTR Racing Truck Specs:, Type:, 2WD Short Course Truck, Scale:1:10, Chassis:, Composite Nylon Modified Tub, Suspension:, Long Front, XX Long Rear, Motor:, Titan 12T 550 modified motor with internal cooling fan, Speed:, 30+ mph with 7-cell battery and included optional 23-tooth pinion gear,
Off-road racing Short Course RC race truck The Traxxas Slash ...Hobby-Lobby
RECEIVER PACK 2500MAH 6V NIMH
,
Receiver Pack 2500mAh 6V NiMH Produced from quality Sanyo cells, ...Hobby-Lobby
RECEIVER 4.8V PACK 2500MAH NIMH
,
Receiver 4.8V Pack 2500mAh NiMH Produced from quality Sanyo cells, ...