RCModelScout.

HobbyKing

CORONA SYNTHESIZED RECEIVER 4CH 36MHZ (V2)

HobbyKing

CORONA SYNTHESIZED RECEIVER 4CH 40MHZ (V2)

HobbyKing

ZIPPY FLIGHTMAX 4000MAH 2S1P 20C HARDCASE PACK

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!Hardcase packs are a must for RC Car enthusiasts. The case helps to ensure that the batteries can stand up to the added stress and shock associated with R/C vehicles. Spec:Capacity: 4000mAhVoltage: 2S1P / 2 Cell / 7.4vDischarge: 20C Constant / 30C BurstWeight: 238g (including wire, plug & case)Dimensions: 137x46x25mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet Connector,

HobbyKing

ZIPPY FLIGHTMAX 5000MAH 3S1P 30C HARDCASE PACK

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!Hardcase packs are a must for RC Car enthusiasts. The case helps to ensure that the batteries can stand up to the added stress and shock associated with R/C vehicles.Spec.Capacity: 5000mAhVoltage: 3S1P / 3 Cell / 11.1vDischarge: 30C Constant / 40C BurstMax Charge Rate: 3CWeight: 429g (including wire, plug & case)Dimensions: 137x46x40mmBalance Plug: JST-XHDischarge Plug: 5mm Bullet-connector,

HobbyKing

ZIPPY FLIGHTMAX 5000MAH 3S1P 20C HARDCASE PACK

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!Hardcase packs are a must for RC Car enthusiasts. The case helps to ensure that the batteries can stand up to the added stress and shock associated with R/C vehicles.Spec:Capacity: 5000mAhVoltage: 3S1P / 3 Cell / 11.1vDischarge: 20C Constant / 30C BurstMax Charge Rate: 2CWeight: 418g (including wire, plug & case)Dimensions: 137x47x40mmBalance Plug: JST-XHDischarge Plug: HXT4mm,

HobbyKing

TURNIGY TRACKSTAR ONE CELL 120A 1/12TH AND 1/10TH SCALE SENSORED BRUSHLESS CAR ESC

Specification:, Input Power (Cells):, 1-2S LiPo/LiFe, 3-6 NiMH (8.4V Max), Motor Type:, Sensored and sensorless Brushless Motors., BEC Output:, 6.0V, 1Amp, Built-in BEC with DC booster for 1 cell LiPo use., Status LED (2 LEDs):, White LED, 3 color LED (Red, Green & Orange), Dimensions (L*W*H/without fan):, 36.5*42*18mm (1.44*1.65*0.71in), 1S LiPo or 3-4S NiMH):, ≥3.5T (1/12 on- road), 2S LiPo or 5-6S NiMH):, ≥4.5T (1/10 on-road) ≥6.5T (1/10 off-road) *, Note:, * 2S Lipoly use requires installation of the supplied heat sink and fan.,

HobbyKing

HOBBYKING ADVANCED EDF JET LED LIGHTING SYSTEM

Our new EDF LED lighting system adds great scale realism to your EDF Jet. This system has been designed exclusively for EDF Jets. Included in this set: Port (Red) & Starboard (Green) wing tip lights, a red clearance beacon, a super bright 10mm white landing light and an afterburner., Features:, • Authentic navigation lighting scheme, Lights:, 1 x 3mm Red LED 450mm lead, Spec:, Input:, 2 channels (Thro & Aux), Dimensions:, (control unit only) 30mm x 50mm x 11mm,

HobbyKing

DHC-2 BEAVER EP/GP .46 SIZE (KENMORE AIR) 1620MM (ARF)

The DH Beaver is without doubt one of the most widely know STOL "bush planes" and has become an aviation classic, good looking, powerful, tough and very capable, the Beaver was ideally suited to operating in the most hostile of conditions. As it could also be fitted with floats or skis, the Beaver became a hugely popular workhorse with both Civilian and Military Operators, despite a slow start, the Beaver became a huge sales success and ranks as one of Canada's most successful exports.This Beaver is modeled in the "Kenmore Air" scheme and has a superb, high detail scale finish. The airframe is nicely constructed and the covering expertly applied. This model features printed rivets and panel lines on the covering providing an ultra-realistic finish. This gives you a truly fantastic looking scale model that any pilot would be proud to own. With a 1620mm wingspan, the Beaver is a great size and has tons of presence both on the ground and in the air.This model can be finished in both electric or glow configuration. The windshield doubles as a removable magnetic battery hatch allowing for easy access to the inside of the model - perfect for accessing your flight battery when used in an electric configuration.The Beaver of course was famous for its superb STOL characteristics and this model is no exception. Landings are a breeze thanks to the large wing area and stable slow-flight characteristics. This fantastic looking DH Beaver is such a pleasure to fly and is very practical, the perfect every day model for even the most demanding RC scale pilots!Features:• High Level of Scale Detail • Beautifully Printed Scale Rivets and Panel Lines• Functional Cockpit Door• Nicely Finished Glass Fiber Cowl • Tough Under-Carriage and Steerable TailwheelSpecs: Wingspan: 1620mmLength: 1115mmFlying Weight: 2700~2800gIncludes:All HardwareInstrucionsRequires:Your Own 5~6 Channel TX/RX.46 Equivelent Brushless Outrunner Motor60A ESC w/BEC4~5 x Standard Size Servo3300~4000mAh 4s Lipoly Battery11x6~12x6 Propeller,

HobbyKing

CORONA SYNTHESIZED RECEIVER 6CH 40MHZ (V2)

HobbyKing

ZYX-GS CAMERA GIMBAL STABILIZATION SYSTEM 3-AXIS GYRO/ACCELEROMETER

Features:, • Three axis MEMS gyro and accelerometer stabilization (pan/tilt/roll), Specs:, Size:, 38x29x13mm / 27x27x9mm, Control range:, -45º~45º (roll), -180 º ~180 º (pan), -135º~90º (tilt),

HobbyKing

VIPERJET COMPOSITE 90MM EDF JET 1370MM (ARF)

Specifications:, Features:, Fully pre-painted & covered, Requires:, Your Own 6 Channel RX/TX,

HobbyKing

TEAM ASSOCIATED RC10B5M TEAM MID MOTOR 2WD ELECTRIC BUGGY (KIT)

1:10 scale 2WD off road has been Team Associated's signature racing class since the release of the original RC10 in 1984. The Team Associated RC10 buggy series has won eleven I.F.M.A.R. World Championships since the class began in 1985. It's the RC Car Action Readers' Choice for Electric Buggy and Editors' Choice for Car of the Year!, Power Source:, Terrain:, Body Style:, Scale Size:, Assembly Level:, Length:, Width:, Wheelbase:, Weight:,

HobbyKing

TEAM ASSOCIATED RC10B5 TEAM REAR MOTOR 2WD ELECTRIC BUGGY (KIT)

1:10 Scale 2WD Electric Off Road Competition Buggy Kit, 1:10 scale 2WD off road has been Team Associated's signature racing class ever since the release of the original RC10 in 1984. The Team Associated RC10 buggy series has won eleven I.F.M.A.R. World Championships since the racing class began in 1985. It's the RC Car Action Readers' Choice for Electric Buggy and Editors' Choice for Car of the Year!, Power Source:, Terrain:, Body Style:, Scale Size:, Assembly Level:, Length:, Width:, Wheelbase:, Weight:,

HobbyKing

MULTISTAR DELUXE MULTIROTOR TRAVEL BACKPACK FOR DJI PHANTOM AND OTHERS

For storage there are 3 external pouches: a Velcro pocket on the left, a web pocket on the right and a huge zipper pouch on the back. The internal storage is accessed from a dual zipper back that opens completely up allowing you to lay the back pack flat to use it as a staging area for your gear. There is an internal pouch on the inside of the back plate and the ridge foam insert is pre-cut to fit a DJI Phantom or Vision2 Multirotor, RC transmitter, Battery’s, Props and Accessory’s., Features:, • V back Top load distributing strap, Size:, Material:, Weight:, Insert:, The insert is designed to fit the DJI Phantom and Vision Multirotor but can be easily modified to fit other Multirotors of the same class,

HobbyKing

HOBBYKING MIDNIGHT FPV 200MM QUAD WITH LEDS AND PDB (KIT)

The Midnight is a 200mm Quad-copter with a unique shape that helps with orientation and strength.  The sleek arm have a spread mount adding to stiffness and helping not to getting snagged on those low hanging branches. There is an 8 thimble crash locked vibration dampening system with a nice sized lower equipment bay. The frame uses a triple layer PDB, with your choice of included 4 led colors: red, blue, white and green. The frame is a combination of varying thickness G10 composite for a light and ridged design. The Narrow 200mm wheelbase is perfect for 5inch props and the “H” configuration gives a nice FPV forward looking low hung view. The Midnight is unique and practical in design and the quality and durability makes this an awesome FPV cruiser., WheelBase:, weight:, LEDs:, Motor mounting:,