HobbyWireless
*NEW FPV584 PRO-DUO PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
- Working voltage | DC 12v (3S 11.1v Lipo battery with |
- 8 Selectable channels | DIP switches |
Frequencies | CH1 |
- Current consumption | ~280mA |
- Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
- Selectable channels | DIP switches |
Frequencies | CH1 |
- Working voltage | 12 VDC |
- Receiving sensitivity | < -90dBm |
- Receiving frequency | ISM 5.8GHz 8CH |
- Antenna port | 50ohm SMA |
- Power supply | DC12V 220mA |
- Video output level | 1Vp-p @ 75ohm |
- Audio output level | 1Vp-p @ 10Kohm |
- Dimensions | 76 x 64 x 18 mm |
- Current consumption | 120mAh |
Details:, , Another great feature of this system is the 2x audio and video outputs, which gives you the ability of connecting more than one device simultaneously such as: (2x video displays) or (1x video glasses and 1X video display) or (1x video display and 1x video recorder) or (1x video glasses and 1x video recorder)..., Transmitter's features:, - Output Power:400mW, Receiver's features:, - R5800DX Duo Audio and Video outputs., - Antennas:, 5.8 GHz Helical Axial, Includes:, , Notes:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The FPV584 Pro-Duo is the best 5.8 GHz set up ...HobbyWireless
X4 QUAD ARF KIT
- Dimensions | Frame 17.5" (44.5cm) and 28" (70cm) from propeller tips. |
- Empty Frame Weight | 580g (receiver and battery not included) |
- Payload Capability | 700g ( battery, receiver, and camera included) |
- Maximum Gross Take-Off Weight | 1380g. DO NOT OVERLOAD ON FeiYu X4 WHICH CAN LEAD TO DANGER. |
- Airborne period | >10mins (with 3S 2200mAh battery) |
- Cell Chemistry | 3S 1500mAh ~ 5000mAh Lithium Polymer, and instant discharge capacity >15C. Support PWM normal ESC. |
Details:, This is any awesome, fun and inexpensive Quadcopter., Features:, , Includes:, , Note:, We recommend you to use RC device with 5 channels or more for expansion.,
It comes with almost everything you need to the it ...HobbyWireless
EZUHF RX RECEIVER 8 CH
Dimensions | ► Width |
► Height | 20mm. |
► Length | 70mm. |
► Weight | 0.1 libra |
Details:, The EzUHF 8-ch receiver which supports a diversity antenna configuration, EzOSD connectivity and is no bigger than a standard 8-ch RC receiver, nor any heavier at just 18-grams. Sporting an intelligent connector configuration this receiver will not have connectors sticking out at odd angles, but has been designed to fit snugly in the smallest of fuselages. Due to its RF hardened design it is designed with the FPV pilot in mind and has all its in- and outputs properly decoupled and filtered., Content of the package:, ► 1 x EzUHF 8 channel Receiver., Note:, How to make your own antenna for this receiver.,
► Antennas are not included ( Available separated here ). ...HobbyWireless
EZUHF LONG RANGE RADIO CONTROL TRANSMITTER
Details:, If you're looking to to extend the range of your RC radio transmitter to further with your RC model, then we the EZUHF is one of the best options available in the market., Features:, , Features:, ► Height 69.8 mm.,
It's an fantastic piece of engineering, it's a must-have for ...HobbyWireless
CCD KILLER CAMERA 420 LINES - PAL
Dimensions | 21x28mm (camera case only). |
White | Left Audio Signal |
Yellow | Video signal or Video feed |
Black | (-) Negative or Ground |
Red | (+) Positive |
Details:, , Watch the performance of this little camera:, , Specifications:, , Wires & Functions:, Green: Right Audio Signal (most transmitters are not stereo (mono). You can use either left or right audio signal),
A CMOS camera whose performance rivals CCD at half the ...HobbyWireless
CCD KILLER CAMERA 420 LINES - NTSC
Dimensions | 21x28mm (camera case only). |
White | Left Audio Signal |
Yellow | Video signal or Video feed |
Black | (-) Negative or Ground |
Red | (+) Positive |
Details:, , Watch the performance of this little camera:, , Specifications:, , Wires & Functions:, Green: Right Audio Signal (most transmitters are not stereo (mono). You can use either left or right audio signal),
A CMOS camera whose performance rivals CCD at half the ...HobbyWireless
SM8166 - LARGE HEAVY DUTY - GROUND STATIONS
Details:, , Description:, High torque analog servo, hybrid 4 metal gears, double ball bearing., Recommend: Ground Station Panning and Tilting antenna system, large scale car model, boats, robot, RC airship etc., Modulation:, Analog, Torque:, , 4.8V:, 417.4 oz-in (30.06 kg-cm), 6.0V:, 459.0 oz-in (33.05 kg-cm), Speed:, , 4.8V:, 0.25 sec/60°, 6.0V:, 0.21 sec/60°, Weight:, 5.43 oz (154.0 g), Dimensions:, , Length:, 2.36 in (60.0 mm), Width:, 1.10 in (28.0 mm), Height:, 2.36 in (60.0 mm), Gear Type:, Hybrid,
Specs Rotation Support Dual BearingsHobbyWireless
PT260 MINI DIGITAL METAL GEARED SERVO WITH FULL 260° DEGREES TURN
Operating voltage | 4.5v-6v |
Torque | 1.8Kg (63oz) at 4.8v |
Speed | 0.10 sec/60° 6v or 0.12 sec/60° at 4.8v |
Gear material | 4 metal gears and 1 nylon gear |
Size | 22.5 x 11.5 x 24.6mm |
Weight | 12 grams |
Details:, , Note:, You might have to adjust the ending points on your RC transmitter to obtain the full 260° degress., Specifications:, Travel: 60° each direction @ 400 µs or 90° each direction @ 600 µs (by adjusting "End Point" value on the RC transmitter),
The PT260 mini digital metal geared servo can smoothly turn ...HobbyWireless
TR1024 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 1000MW - LAWMATE
The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications,(for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Note: We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles. In this case our 900Mhz or 1.2Ghz systems are the right choice., Package Includes:, - Transmitter 2.4ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 2.4 GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
FPV-PRO1024 KIT 1000MW 2.4GHZ + DIVERSITY RECEIVER DOUBLE RECEPTION - LAWMATE - CAMERA IS OPTIONAL
Nominal output impedance | 50 ohms |
Operating Voltage | 10.5 - 13 volts DC |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Details:, , This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 2.4 GHz 1000mW with built-in microphone (USA customers only channel 1 is available. It does not affect the performance of the transmitter), Specifications:, Note:, If you are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it can overheat damaging the unit! It is 1000mW transmitter in a tiny metal box!!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you're looking for a rock solid FPV system with ...HobbyWireless
T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
Weight | 30g (transmitter only) |
Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
Nominal output impedance | 50 ohms |
Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
Video input voltage 75-ohm impedance | 1Vp-p |
Audio input voltage 10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Storage humidity | 10 to 80% |
Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs 1000mW RF output power Eight (8) ...HobbyWireless
DJT/D8R-II PLUS TELEMETRY COMBO RX/TX FOR JR
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 11bit (3072) |
Details:, , JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX-22, MX-24S, PX, 9XII, Note:, All technical questions about FrSKy products must to be emailed to frsky@frsky-rc.com,
This combo receiver and tarnsmitter module will not only give ...HobbyWireless
DFT/D8R-II PLUS TELEMETRY COMBO RX/TX FOR FUTABA, HITEC, WFLY
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 11bit (3072) |
Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
Hitec | Optic 6, Eclipse 7, Prism 7. |
WFLY | WFT09, WFT08. |
Details:, , Note:, All technical questions about FrSKy products must to be emailed to frsky@frsky-rc.com,
This combo receiver and tarnsmitter module will not only give ...HobbyWireless
CCD KILLER CAMERA 420 LINES - NTSC (CAMERA ONLY)
Dimensions | 21x28mm (camera case only). |
White | Left Audio Signal |
Yellow | Video signal or Video feed |
Black | (-) Negative or Ground |
Red | (+) Positive |
Details:, , Watch the performance of this little camera:, , Specifications:, , Wires & Functions:, Green: Right Audio Signal (most transmitters are not stereo (mono). You can use either left or right audio signal),
A CMOS camera whose performance rivals CCD at half the ...HobbyWireless
CCD KILLER CAMERA 420 LINES - PAL (CAMERA ONLY)
Dimensions | 21x28mm (camera case only). |
White | Left Audio Signal |
Yellow | Video signal or Video feed |
Black | (-) Negative or Ground |
Red | (+) Positive |
Details:, , Watch the performance of this little camera:, , Specifications:, , Wires & Functions:, Green: Right Audio Signal (most transmitters are not stereo (mono). You can use either left or right audio signal),
A CMOS camera whose performance rivals CCD at half the ...