RCModelScout.

DPCAV

9 GRAM R/C HOBBY SERVO

General Specs:, ,

DPCAV

5.8GHZ AUDIO/VIDEO TRANSMITTER, 600MW

New for 2012:, Smaller Size, wider operating voltage., This transmitter is compatible with 5.8GHz A/V receivers offered by ImmersionRC, Airwave, and FatShark. Here's a list of popular receivers that we offer:, , Features and Specifications:, , Important:, , Notice: This is a ham radio hobby type product. Using the TX-5G8-600 in the USA and most other countries will require an Amateur Radio license. Some countries may forbid its use. It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., Frequency Summary List:, , Instruction Manual:, Click Me!,

DPCAV

FY-30A PRO R/C INERTIAL STABILIZER SYSTEM

Sold Out:, No longer available., How it works:, , Applications:, , The FY30A can be used in the following fixed wing models:, , Compare FY-30A to FY-20A:, Click Me!, Instruction Manual:, Click Me!, Firmware Update Instructions:, Click Me!, Firmware V1.20 Upgrade Files:, Click Me!, Firmware PC Application:, Click Me!, Manufacture's web site:, Click Me!, Sold Out:, No longer available.,

DPCAV

GUARDIAN STABILIZER (FOR OSD-PRO)

DPCAV

ELOGGER VIDEO OSD-PRO EXPANDER MODULE

The OSD Pro is a powerful, modular, and fully configurable video/audio On-Screen Display (OSD) device. It provides graphics and voice announcements that report a variety of alarms and data, including: acoustic variometer, electrical performance, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, and many other features., how YOU configure the display. Here's a screen shot that shows some of the information that can be shown:, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Specification Summary:, IMPORTANT NOTE: The OSD-Pro requires the EagleTree eLogger V3 or V4 module. To display navigation related data the GPS expander module is needed. These items are available separately (please see the related items links shown near the bottom of the page).,

DPCAV

EAGLETREE OSD-PRO FPV SYSTEM, 3-PIECE KIT

As shown in the photo, the kit provides the following Eagle Tree components:, , This OSD will provide graphic data (and voice announcements) that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand the reported telemetry information even further by using low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on your existing video display. Here are some examples:, , Here's some useful links to the manufacturer's web site:, Click Me,

DPCAV

5.8GHZ CLOVERLEAF ANTENNA, RHCP

Manufacture:, Aerial Video Systems, Important: To ensure RF performance do NOT add paint or coat the element lobes (leave the factory applied finish as-is). The elements should not be allowed to rest against any structures. Do not bend or deform the elements., NOTE: Some FPV model installations may need an extension to ensure the antenna is away from nearby surfaces.,

DPCAV

PANDORA PAN & TILT KIT

DPCAV

GUARDIAN 2D/3D INERTIAL STABILIZER (STANDALONE MODEL)

Q: Why do I need the Guardian?, The Guardian helps both beginner and expert pilots fly with confidence, and provides two key modes of operation: In 2D flight mode, the Guardian provides much smoother flight and wing leveling stabilization for your model, which makes it a lot easier to adjust and fly your plane. The Guardian "remembers" level flight for your model and returns it to level flight when needed, as well as providing precise "fly by wire" control., The Guardian has two submodes for 3D flying: In 3D Heading Lock submode, simply center your sticks to have the Guardian lock onto your present attitude (pitch, roll, and heading), which can make it easier to perform stunts like prop hanging, inverted flight, knife edges, low speed harriers, etc. In 3D Gyro submode, the Guardian uses its built-in 3 axis gyro to increase your model’s stability, while leaving you in full control. In this mode the Guardian greatly reduces the effects of gusts, turbulence, motor torque and other factors, and can expand the maneuverability of your model in a variety of conditions., Q: I Fly FPV. Is the Guardian for me?, Q: Will the Guardian work with my model?, Q: How do I install the Guardian?, Q: How do I configure the Guardian?, Q: How does the Guardian work?, Q: What sets the Guardian apart from other Stabilization systems out there?, *Note: Using the PC software will require a common Micro-USB cable. Most likely you already have one of these, but it not then they are available from your local electronic/computer store.,

DPCAV

HYPERION ATLAS DIGITAL MICRO SERVO, HP-DS13TMB

,

DPCAV

HYPERION ATLAS DIGITAL MICRO SERVO, HP-DS13TCB

,

DPCAV

SUPER HIGH TORQUE SERVO, METAL GEARS

Servo dimensions (Refer to the drawing at end of page):,

DPCAV

HIGH TORQUE SERVO, METAL GEARS

Servo dimensions (refer to the drawing at end of page):,

DPCAV

LOCOSYS LS20033 5HZ GPS EVALUATION BOARD

USB Driver for Win 2K/XP:, Click Me!, LS20033 Data Sheet:, Click Me!, MTK Command Set:, Click Me!, MTK Mini GPS App:, , GPS Fox App (Win 2000/XP):,

DPCAV

SERVO DRIVER PRO (SERVO ADJUSTER / TESTER)

MX8340 Servo Driver Pro:, This compact servo signal emulator is used to test and evaluate R/C servos. It can also be used to program our, Features:,