HobbyKing
TURNIGY 9X 9CH TRANSMITTER WITHOUT MODULE (MODE 1) (V2 FIRMWARE)
| Number of Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD |
| Support Type | Heli/Acro/Glid |
| Encoder type | ppm/pcm |
| Subtrim | Yes |
| Simulator Interface | Yes |
| Buzzer | Yes |
| Low Voltage Show | Yes |
| Required | Battery, Module, RX |
Support user:8, Stick model:4, Included:, Turnigy 9x 9Ch Transmitter only, Note:, The retail price of this radio is close to the original 9X with module and Receiver due to supply and demand. As this version is manufactured in much smaller quantities the cost price increases. This version of 9x is offered by request for customers wishing to use their own choice of module and receiver without the hassle of removing the module and wire from the original 9X.,
Due to popular demand, the Turnigy 9X is now available ...5 Reviews
HobbyKing
ORANGERX OPEN LRS 433MHZ 9CH RECEIVER
| Frequency | 433MHz |
| Voltage input | 3.7~15VDC |
| Dimensions | 52x29x15mm |
Features:, • 3.3v FTDI support for Arduino, Specs:, IC:Atmega328P, Weight:, 10.5g (w/out antenna), Includes:, OrangeRx Open LRS Rx, *Note:, The setup and use of Open LRS requires computer programming skills and basic Arduino experience. This is not a "plug and play" system. See the attached document under the "Files" tab for resources on programming info, firmware downloads and more.,
The all new OrangeRX Open LRS Rx is an open ...5 Reviews
HobbyKing
ORANGERX OPEN LRS 433MHZ TX MODULE (JR/TURNIGY COMPATIBLE)
| Frequency | 433MHz |
| Voltage input | 6.8~12VDC |
| Power | 100mW |
| Range | Full range system |
Features:, • 3.3v FTDI support for easy programming (, Specs:, Compatibility:, 5-pin JR compatible module-based transmitters, IC:Atmega328P, Includes:, OrangeRx OpenLRS Tx Module (JR/Turnigy compatible), *Note:, The setup and use of Open LRS requires computer programming skills and basic Arduino experience. This is not a "plug and play" system. See the attached document under the "Files" tab for resources on programming info, firmware downloads and more., : Open LRS uses 3.3v FTDI support,,
The all new OrangeRX Open LRS TX Module is an ...5 Reviews
HobbyKing
3660SL 3180KV BRUSHLESS INRUNNER (WATERCOOLED)
| Diameter | 36mm |
| Length | 60mm |
| Shaft diameter | 5mm |
| Max voltage | 18V |
| Max current | 94A |
| Idle current | 2.7A |
| Weight | 280g |
Kv:3180rpm/v,
3660SL 3180kv Brushless Inrunner (WaterCooled) This quality brushless inrunner motor ...5 Reviews
HobbyKing
TURNIGY AQUASTAR 4084-1050KV WATER COOLED BRUSHLESS MOTOR
| RPM/v | 1050kv |
| Winding | 1.5Y |
| Max voltage | 22.2V (6S) |
| Max Current | 160A |
| Max Watts | 3100W |
| Resistance | 0.014ohm |
| No Load Current | 1.4A |
| Can Diameter inc. Water Jacket | 49mm |
| Can Length | 84mm |
| Shaft Size | 5mm |
| Weight | 490g |
| Motor Connector | 4mm bullet plug |
Features:, • CNC Machined Billet T6 Aluminum Motor Can, Specs:, Can Diameter:, 39mm (actual motor diameter),
The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for ...HobbyKing
TURNIGY AQUASTAR 4084-620KV WATER COOLED BRUSHLESS MOTOR
| RPM/v | 620kv |
| Winding | 2.5Y |
| Max voltage | 37V (10S) |
| Max Current | 105A |
| Max Watts | 3050W |
| Resistance | 0.03ohm |
| No Load Current | 0.7A |
| Can Diameter inc. Water Jacket | 49mm |
| Can Length | 84mm |
| Shaft Size | 5mm |
| Weight | 508g |
| Motor Connector | 4mm bullet plug |
Features:, • CNC Machined Billet T6 Aluminum Motor Can, Specs:, Can Diameter:, 39mm (actual motor diameter),
The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for ...HobbyKing
HOBBYKING BL1230 5300KV BRUSHLESS INRUNNER MOTOR
| Battery | 3s (11.1v) |
| RPM | 5300kv |
| Max current | 8.5A |
| Diameter of shaft | 1.5mm |
| Length of front shaft | 8mm |
| Weight | 15.3g |
Dimension:, 30mm x 12mm, 38mm(with shaft),
This tiny inrunner packs a punch! Excellent choice for your ...HobbyKing
FUEL VENT THROUGH HULL/TANK - TWIN PACK
,
Fuel tank vent through hull fitting. For use on Gas ...5 Reviews
HobbyKing
INC .40 GLOW ENGINE WITH MUFFLER (ABC PISTON/SLEEVE ASSEMBLY)
| Displacement | 6.47CC |
| Bore | 20.50mm |
| Stroke | 19.6mm |
| Suggested prop | 10x6 |
| RPM | 2,000 ~ 16,000 |
Weight:, 457g (w/muffler and carburetor),
Made in Taiwan, INC engines offer high performance for cars, ...5 Reviews
HobbyKing
KDS INNOVA 700 V2 DFC FLYBARLESS HELICOPTER KIT
| Length | 1400mm |
| Height | 410mm |
| Main Rotor | 690mm |
| Tail Blade | 105mm |
| Motor Pinion | 12T |
| Main Gear | 115T |
| Tail Drive gear | 42T |
| Gear Ratio | 9.6 |
| Weight (w/o power) | 2500g |
*Note:, This is the latest version of the KDS Innova series helicopters featuring the all new DFC rotor head design and update parts. No old stock here!, Features:, • High Precision DFC Rotor Head, Specs:, Tail Gear:9T, Included:, KDS Innova 700 V2 DFC flybarless helicopter kit, Required:, 420~480KV Brushless outrunner motor,
Looking for PRO class helicopter performance at a price that ...5 Reviews
HobbyKing
KDS INNOVA 550 V2 DFC FLYBARLESS HELICOPTER KIT
| Length | 1120mm |
| Height | 365mm |
| Main Rotor | 550mm |
| Tail Blade | 95mm |
| Motor Pinion | 14T |
| Main Gear | 150T |
| Tail Drive gear | 42T |
| Gear Ratio | 10.7 |
| Weight (w/o power) | 1650g |
*Note:, This is the latest version of the KDS Innova series helicopters featuring the all new DFC rotor head design and update parts. No old stock here!, Features:, • High Precision DFC Rotor Head, Specs:, Tail Gear:9T, Included:, KDS Innova 550 V2 DFC flybarless helicopter kit, Required:, 1100~1300KV Brushless outrunner motor,
Looking for PRO class helicopter performance at a price that ...5 Reviews
HobbyKing
KDS INNOVA 600 V2 DFC FLYBARLESS HELICOPTER KIT
| Length | 1280mm |
| Height | 385mm |
| Main Rotor | 600mm |
| Tail Blade | 95mm |
| Motor Pinion | 12T |
| Main Gear | 115T |
| Tail Drive gear | 42T |
| Gear Ratio | 9.6 |
| Weight (w/o power) | 2250g |
| Sale Price | $419.99 Limited time only |
*Note:, This is the latest version of the KDS Innova series helicopters featuring the all new DFC rotor head design and update parts. No old stock here!, Features:, • High Precision DFC Rotor Head, Specs:, Tail Gear:9T, Included:, KDS Innova 600 V2 DFC flybarless helicopter kit, Required:, 500~530KV Brushless outrunner motor,
Looking for PRO class helicopter performance at a price that ...5 Reviews
HobbyKing
THROUGH HULL FLUSH MOUNT WATER COOLING TELLTALE
,
This is an all alloy flush mounting through hull water ...HobbyKing
THROUGH HULL FLUSH MOUNT WATER COOLING TELLTALE - SMALL
,
This is an all alloy flush mounting through hull water ...5 Reviews
HobbyKing
PBY CATALINA SEAPLANE COMPOSITE 1800MM (ARF)
| Wingspan | 1800mm |
| Length | 1097mm |
| Flying Weight | 2600~2700g |
| Wing Area | 41 dm² |
| Wing Loading | 63~66g dm² |
| ESC | 40~60A (required) |
| Includes | Instruction Book |
Specs:, Motor:, 35-XX brushless outrunner x 2 (required), Servo:, standard servo x 4 (required), Requires:, 35-XX brushless outrunner motor x 2,
The Catalina is arguably the most famous flying boat ever ...5 Reviews