HobbyKing
TURNIGY 600 SERIES 510KV BRUSHLESS OUTRUNNER HELICOPTER MOTOR
| Operating Voltage | 44.4V (12S lipoly) |
| RPM | 510kv |
| Max Current | 70A |
| Max Power | 3100W |
| Idle Current | 1.9A |
| Resistance | 0.024ohms |
| Shaft | 6mm |
| Connector | 4mm bullet |
| Bolt Hole Spacing | 25/30mm |
| Weight | 362g |
Specs:, Bolt Thread:M3,
Turnigy Heli series outrunner motors are an excellent upgrade for ...HobbyKing
1/10 HOBBYKING MISSION-D 4WD GTR DRIFT CAR (ARR)
| Overall Length | 390mm |
| Overall Width | 195mm |
| Wheelbase | 255mm |
| Height | 123mm |
Features:, • ARR (Almost Ready to Run), simply add your own radio system and battery, Specs:, Motor:, Modified 22T brushed (pre-installed), ESC:, Brushed (pre-installed), Servo:, High torque standard size (pre-installed), Includes:, 1/10 Mission-D 4WD Drift Car, Requires:, 2CH Transmitter and Receiver,
The Mission-D 4WD Drift Car is without a doubt the ...5 Reviews
HobbyKing
DENSION WIFI RC RECEIVER SYSTEM FPV FOR YOUR IPHONE, IPOD, IPAD AND ANDROID
| iPhone 4S, 4, 3Gs and 3G (minimum iOS version | 4.0) |
| Dimensions | 44x28x18mm |
| Power supply | 6~16V |
| Video resolution | 325x288 (CIF) |
| Frame rate | 15 FPS |
| Power consumption | 100mA @ 6V idle, |
| Package contents | WiRC control panel |
Features:, • 8 PPM output channels for Servo or ESC control, Compatible with the following devices:, Technical specs:, Add new applications to the embedded Linux operating system of your WiFi RC. No-one has an FTP server on wheels yet :),
The Dension WiFi RC is a plug & play wireless ...HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM W/DATAPOD
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Key features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
HKPILOT MEGA V2.5 FLIGHT CONTROLLER USB/GYRO/ACC/MAG/BARO
| Dimensions | 67x40x10mm |
| Weight | 17g |
| Includes | HKPilot Mega 2.5 |
Features:, • Arduino Compatible, *Note:, GPS module is not included. Sold separately., Specs:,
The HKPilot Mega 2.5 is a complete open source autopilot ...5 Reviews
HobbyKing
ARDUINO LILYPAD ATMEGA328 MAIN BOARD
| Chip | ATmega328 |
| Dimensions | 50x50x4mm |
| Weight | 17g |
Specs:,
This is LilyPad Arduino - the main board consisting of ...5 Reviews
HobbyKing
FIBERGLASS RC YACHT SAILBOAT THUNDER 1000MM (ARR)
| Length | 1000mm |
| Height | 1890mm |
| Weight | 1.4kg |
| Area of Sails | 0.4m2 |
| Ballast weight | 1.2kg |
Note: Please ensure you fill the keel ballast to 1.2kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.,
RC Sailboat-Thunder A beautifully crafted R/C sailboat, fully built and ...5 Reviews
HobbyKing
FIBERGLASS RC YACHT SAILBOAT MONSOON 900MM (ARR)
| Length | 900mm |
| Height | 1800mm |
| Area of Sails | 0.38m2 |
| Ballast weight | 1.0kg |
Note: Please ensure you fill the keel ballast to 1.0kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.,
RC Sailboat-Monsoon A beautifully crafted R/C sailboat, fully built and ...HobbyKing
1/10 HOBBYKING MISSION-D 4WD GTR DRIFT CAR (KIT)
| Overall Length | 390mm |
| Overall Width | 195mm |
| Wheelbase | 255mm |
| Height | 123mm |
Features:, • KIT version allowing your to choose your own electronics, Specs:, Includes:, 1/10 Mission-D 4WD Drift Car (KIT version), Requires:, 2CH Transmitter and Receiver,
The Mission-D 4WD Drift Car is without a doubt the ...HobbyKing
UFO Y-4 MICRO MULTICOPTER W/2.4GHZ TRANSMITTER AND AUTO-FLIP FEATURE (MODE 2) (RTF)
| Length | 180mm |
| Height | 65mm |
| Flying Weight | 77g |
| Includes | UFO Y-4 Multicopter |
Features:, • Completely "Ready to Fly", Specs:,
Are you new to multirotor aircraft or simply looking for ...5 Reviews
HobbyKing
2804-210KV BRUSHLESS GIMBAL MOTOR (IDEAL FOR GOPRO TO COMPACT STYLE CAMERAS)
| Poles | 12N14P |
| KV(RPM/V) | 210 |
| Resistance | 10.4omh |
| Weight | 35g |
| Wire | 0.19mm |
| Torque | 240g |
| Bottom holes center to center | 16mm and 19mm |
| Top holes center to center | 12mm |
Spec:,
Looking to make your video platform ultra-smooth? This is the ...5 Reviews
HobbyKing
4008-70KV BRUSHLESS GIMBAL MOTOR (IDEAL FOR MID STYLE CAMERAS LIKE THE NEX6)
| Poles | 12N14P |
| Resistance | 17.6omh |
| Weight | 104g |
| Wire | 0.21mm |
| Torque | 540g |
| Bottom holes center to center | 25mm |
| Top holes center to center | 14mm |
spec:, KV(RPM/V):70,
Looking to make your video platform ultra-smooth? This is the ...HobbyKing
2206-140KV BRUSHLESS GIMBAL MOTOR (IDEAL FOR GOPRO STYLE CAMERAS)
| Poles | 12N14P |
| KV(RPM/V) | 140 |
| Resistance | 11.25omh |
| Weight | 32.3g |
| Wire | 0.17mm |
| Torque | 230g |
| Bottom holes center to center | 16mm and 19mm |
| Top holes center to center | 12mm |
Specs:,
Looking to make your video platform ultra-smooth? This is the ...5 Reviews
HobbyKing
TELEMETRY RADIO CASES FOR GROUND AND AIR MODULES
Includes:, 3M Foam Double-tape X1,
Keep your Telemetry Radios safe! These cases are made out ...5 Reviews