ngHobbies
7" FPV DISPLAY WITH DUAL DIVERSITY 32CH 5.8GHZ RX
The display is a 16 | 9 aspect ratio, but the incoming video can be configured to 16 |
Panel size | 7.0 inch |
Panel type | TFT LCD |
Resolution | 800×480 |
Backlight | LED |
Horizontal frequency range | 30~ 60 kHz |
Field frequency range | 50 ~75 Hz |
Dot pitch | 0.0642(W)×0.1790(H)mm |
Brightness | 400cd/㎡ |
Contrast ratio | 500 |
Response time | 15 ms |
Viewing angle | 70°/70°(L/R) 50°/60°(U/D) |
Power requirement, input voltage | DC 6 ~18V middle pin positive |
Power consumption | ≦ 5W |
Operation temperature range | -20℃~60℃ |
Storage temperature range | -30℃~70℃ |
Dimension Unit size | 182(L)×127(W)×32(H) mm |
Unit weight | 390 g |
Connector type | RP-SMA ( |
NGHobbies is happy to bring you this 5.8Ghz dual diversity 7" FPV display specifically designed for FPV purposes as this display will not go "blue screen" when the wireless signal drops out for a few seconds. This is the first ground station monitor, designed specially for FPV outdoor use. With its high resolution (800*480), high contrast ratio (500:1) and brightness of 400cd/ ㎡ this is really the best choice for theFPV flyer who chooses to fly with a monitor instead of goggles., Specifications:, Display ratio: 16:9, Number of channels on 5.8Ghz: 32, Documentation:, Dip switch reference guide for channel selection,
The included sun shade, allows to lock the sun out ...ngHobbies
8" FPV DISPLAY WITH DUAL DIVERSITY 32CH 5.8GHZ RX
The display is a 16 | 9 aspect ratio, but the incoming video can be configured to 16 |
Panel size | 8.0 inch |
Panel type | TFT LCD |
Resolution | 800×480 |
Backlight | LED |
Horizontal frequency range | 30~ 60 kHz |
Field frequency range | 50 ~75 Hz |
Dot pitch | 0.0642(W)×0.1790(H)mm |
Brightness | 400cd/㎡ |
Contrast ratio | 500 |
Response time | 15 ms |
Viewing angle | 70°/70°(L/R) 50°/60°(U/D) |
Power requirement, input voltage | DC 6 ~18V middle pin positive |
Power consumption | ≦ 7W |
Operation temperature range | -20℃~60℃ |
Storage temperature range | -30℃~70℃ |
Dimension Unit size | 209(L)×147(W)×35(H) mm |
Unit weight | 540 g |
Connector type | RP-SMA ( |
NGHobbies is happy to bring you this 5.8Ghz dual diversity 8" FPV display specifically designed for FPV purposes as this display will not go "blue screen" when the wireless signal drops out for a few seconds. This is the first ground station monitor, designed specially for FPV outdoor use. With its high resolution (800*480), high contrast ratio (500:1) and brightness of 400cd/ ㎡ this is really the best choice for theFPV flyer who chooses to fly with a monitor instead of goggles., Specifications:, Display ratio: 16:9, Number of channels on 5.8Ghz: 32, Documentation:, Dip switch reference guide for channel selection,
The included sun shade, allows to lock the sun out ...ngHobbies
7" FPV DISPLAY WITH DUAL DIVERSITY 32CH 5.8GHZ RX
The display is a 16 | 9 aspect ratio, but the incoming video can be configured to 16 |
Panel size | 7.0 inch |
Panel type | TFT LCD |
Resolution | 800×480 |
Backlight | LED |
Horizontal frequency range | 30~ 60 kHz |
Field frequency range | 50 ~75 Hz |
Dot pitch | 0.0642(W)×0.1790(H)mm |
Brightness | 400cd/㎡ |
Contrast ratio | 500 |
Response time | 15 ms |
Viewing angle | 70°/70°(L/R) 50°/60°(U/D) |
Power requirement, input voltage | DC 6 ~18V middle pin positive |
Power consumption | ≦ 7W |
Operation temperature range | -20℃~60℃ |
Storage temperature range | -30℃~70℃ |
Dimension Unit size | 209(L)×147(W)×35(H) mm |
Unit weight | 540 g |
Connector type | Standard SMA |
NGHobbies is happy to bring you this 5.8Ghz dual diversity 7" FPV display specifically designed for FPV purposes as this display will not go "blue screen" when the wireless signal drops out for a few seconds. This is the first ground station monitor, designed specially for FPV outdoor use. With its high resolution (800*480), high contrast ratio (500:1) and brightness of 400cd/ ㎡ this is really the best choice for theFPV flyer who chooses to fly with a monitor instead of goggles., Specifications:, Display ratio: 16:9, Number of channels on 5.8Ghz: 32, Documentation:, Dip switch reference guide for channel selection,
The included sun shade, allows to lock the sun out ...ngHobbies
MTO4628-470-MK MOTOR
Diameter | 48mm |
Height | 28mm |
Weight | 115g |
Battery cells supported | 3-6s |
Internal resistance | 0.125 |
No load current | 0.7A |
Maximum current | 27A |
Maximum power | 610W |
Maximum thrust | 2480g |
Specifications:, KV: 470,
ngHobbies
MTO4228-620-MK MOTOR
Diameter | 42mm |
Height | 28.5mm |
Weight | 85g |
Battery cells supported | 3-6s |
Internal resistance | 0.275 |
No load current | 0.7A |
Maximum current | 33A |
Maximum power | 714W |
Maximum thrust | 2400g |
Specifications:, KV: 620,
ngHobbies
MTO3536-800-MK MOTOR
Diameter | 34.8mm |
Height | 36mm |
Weight | 100g |
Battery cells supported | 3-6s |
Internal resistance | 0.13 |
No load current | 0.9A |
Maximum current | 34A |
Maximum power | 753W |
Maximum thrust | 2440g |
Specifications:, KV: 800,
ngHobbies
MTO1804-2400-MK CCW MOTOR
Diameter | 22.5mm |
Height | 16.5mm |
Weight | 15g |
Battery cells supported | 2-3s |
Internal resistance | 0.232 |
No load current | 0.6A |
Maximum current | 10A |
Maximum power | 108W |
Maximum thrust | 350g |
Specifications:, KV: 2400,
ngHobbies
MTO1804-2400-MK CW MOTOR
Diameter | 22.5mm |
Height | 16.5mm |
Weight | 15g |
Battery cells supported | 2-3s |
Internal resistance | 0.232 |
No load current | 0.6A |
Maximum current | 10A |
Maximum power | 108W |
Maximum thrust | 350g |
Specifications:, KV: 2400,
ngHobbies
MTO1806-2300-MK MOTOR
Diameter | 22.5mm |
Height | 18.5mm |
Weight | 18.5g |
Battery cells supported | 2-3s |
Internal resistance | 0.25 |
No load current | 0.2A |
Maximum current | 12A |
Maximum power | 100W |
Maximum thrust | 445g |
Specifications:, KV: 2300,
ngHobbies
MTO2208-1500-MK MOTOR
Diameter | 27.5mm |
Height | 25.5mm |
Weight | 45g |
Battery cells supported | 3-4s |
Internal resistance | 0.11 |
No load current | 0.4A |
Maximum current | 26A |
Maximum power | 380W |
Maximum thrust | 1060g |
Specifications:, KV: 1500,
ngHobbies
FXC1806-2300-MK LUMENIER MOTOR
Configuration | 12N14P |
Stator Diameter | 18mm |
Shaft Diameter | 2mm |
Motor Dimension (Diameter x Length) | Φ23×18.5mm |
Weight(g) | 18g (without prop adapter) |
ldle current(10)@10v(A) | 0.6A |
No.of Cells(Lipo) | 2-3S |
Max Continuous current(A)180S | 14A |
Max Continuous Power(W)180S | 150W |
Max. efficiency current | (3-8A)>83% |
Internal resistance | 117mΩ |
Specifications:, KV: 2300, Stator Length: 6m,
Maytech 5x3 Carbon Fiber Props . The motor comes with ...ngHobbies
APC SLOW FLYER 10X4.7 PROPELLER
- External diameter | 10" |
- Pitch | 4.7" |
- Mounting hole | 5mm |
Technical Data:, Package contains:, One propeller, manual and rings.,
This is a 10 x 4.7 slow flyer propeller that ...ngHobbies
APC SLOW FLYER 10X4.7 PUSHER PROPELLER
- External diameter | 10" |
- Pitch | 4.7" |
- Mounting hole | 5mm |
Technical Data:, Package contains:, One propeller, manual and rings.,
This is a 10 x 4.7 slow flyer pusher propeller ...ngHobbies
FORCEFLY
http | //nghobbies.com/forum/index.php?topic=100.0 |
Demo Video:, Features:, Fully programmable flight control:, Control the aircraft roll, pitch, and yaw (twist grip) with one hand, as well as throttle, programmable settings allow complete configuration of each axis – travel adjustment, dual rates, exponential, reverse, trim, etc., Force feedback control:, Active force feedback – pushes the flight stick according to changes in aircraft attitude, Gyro Stabilisation:, Mixes gyro feedback directly to control axes to provide automatic gyro flight stabilization, Model memory:, Save up to eight different models in the ForceFly, PPM Channel Assignment:, Assign any axis to any output channel, Interface ports:, Optional head tracker interface (also for future expansion), Pacakge content:, - ForceFly circuit, Fully Supported Joystick:, - Logitech G940 Flight System (Highest Recommandation), Limited Support for:, - Microsoft Sidewinder 2, Documentation:, Quick Start Manual:, Click here, Detailed user guide on Wiki:, Click Here, Support thread:, New Firmware:, On October 7th, 2011, Version 1.10 firmware has been released. The firmware can be uploaded to all revious Forcefly versions as well using the PicKit 3 programmer kit, available here:, Pickit 3, A full documentation for the firmware upgrade procedure is still pending, till then you can download the firmware by clicking on the following link:, Download Firmware Version 1.10,
The ForceFly is another exciting FPV tele-presence product from EMR ...ngHobbies
NGH-420A OSD CAMERA (NTSC)
Pixels NTSC | 510x492, PAL |
Specifictions:, 1/3" Sony color CCD sensor., Special Note:, , Manual:, Click Here,
The NGH-420A Digital OSD Camera is very compact and the ...