HobbyWireless
TURNIGY 160 MAH 1S 3.7V 30C POWER SYSTEMS BATTERY
Details:, Upgraded capacity and discharge curve., : 160mAh, : 1S / 1 Cell / 3.7v, : 30C Constant, : 4.3g (including balance & discharge plug), : 37x12x6mm, : JST-XH,
More power for your E-Flite or Kyosho mini plane. Spec. ...HobbyWireless
POWER CABLE FOR FATSHARK/IMMERSIONRC TRANSMITTERS
Details:,
- Replacement power cable for FatShark/ImmersionRC transmitters, Molex and JST ...HobbyWireless
AUDIO, VIDEO AND POWER OUT CABLE FOR BLACK BOX VR1500 RECORDER
Details:,
This is an audio, video and power output cable for ...HobbyWireless
GAUI 4-IN-1 POWER CONNECTOR
Details:, , Product Description:, Replacement connectors for the Gaui 330X Quad Copter.,
HobbyWireless
G.T. POWER SERVO TESTER & CCPM SERVO CONSISTENCY MASTER
Weight | 1.1 ounces |
Input | 4.8 ~ 6V |
Details:, , Features:, , Specifications:, , Size:, 1.9 x 0.7 x 1.6 inches,
A Servo & CCPM Servo Consistency Master/Checker. Usefull tool to ...HobbyWireless
POWER PLUG 2.1MM X 5.5MM
Details:, - Works perfectly with any of our receivers, transmitters and cameras., Note:, Avoid plugs that will give you bad contact and eventually loss of video.,
- A highly recommended product. - About 10" longHobbyWireless
TX-V524 500MW 2.4 GHZ PLUG AND PLAY TRANSMITTER WITH WIRES - LAWMATE
Nominal output impedance | 50 ohms |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Weight | 18g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Operating Voltage: 5.5 - 13 volts DC (to use with 12V camera you can only power the transmitter using 12V source, 3S 11.1V Lipo battery works great)., Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
XM900DA 3G 520 LINES SUB-MICRO COLOR CAMERA 5 VOLTS WITH BUILT-IN MICROPHONE - PAL
Features/Specs | SENSOR :1/3 CMOS |
AUDIO | YES |
Note | Make sure you power it using 5 volts DC. |
Details:, This is the smallest fully cased 520TVL Day & Night Vision Mini CCTV Camera,
It weighs 3.2 grams 5 volts camera is a great ...HobbyWireless
EZUHF RX LITE RECEIVER 8 CH
Power Requirements | ► 9-12v DC 85m. |
Details:, The EzUHF R/C control system is a reliable R/C control up link for FPV and UAV pilots who desire a robust control system for safe control at longer distances., Features/ Specifications:, ► Reliable FHSS Link, Dimensions:, ► 85 x 74 x 23mm 118g., Note:, How to make your own antenna for this receiver.,
It was designed with the FPV/ UAV pilot in mind, ...HobbyWireless
XM900DA 3G 520 LINES SUB-MICRO COLOR CAMERA 5 VOLTS WITH BUILT-IN MICROPHONE - NTSC
Features/Specs | SENSOR :1/3 CMOS |
AUDIO | YES |
Note | Make sure you power it using 5 volts DC. |
Details:, ,
This is the smallest fully cased 520TVL Day & Night ...HobbyWireless
XM900D-12 3G 520 LINES SUB-MICRO COLOR CAMERA PLUG AND PLAY - PAL
Features/Specs | SENSOR :1/3 CMOS |
Details:, This is the smallest fully cased 520TVL Day & Night Vision Mini CCTV Camera, Note:, You can power this using 6 - 24 volts DC.,
It weighs 3.2 grams this camera is a great option ...HobbyWireless
8" INCHES LCD-LED MONITOR CUSTOMIZED FOR FPV (SCREEN NEVER GOES BLUE OR BLACK)
Model | EV-8 |
Screen | 8" inches TFT LCD LED Backlit |
Dimensions W x H x D | (209 x 147 x 35mm) 8.2" x 5.78" x 1.37" |
Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
Contrast Ratio | 500 |
Weight | < 650 gr (1.35lb) |
Resolution | 800 x 400 pixels |
Brightness | 450cd/m2 |
Audio input | 1 (mono) |
Input Singal | RCA Video |
Color System | PAL/NTC/SECAM (manually selected by the user) |
Operating Voltage | Input 6-18VDC (2s-4s lipo battery can be used) |
Working Temperature | -20℃~60℃ |
Storage Temperature | -30℃~70℃ |
Manufacturer Warranty | 90 days |
Details:, The EV8 is an awesome 8" inches high resolution LED monitor tailoired for FPV and outdoor applications., Specifications:, Video input: 1, Power Consumption: 7W, Includes:, 8" Monitor,
I will never go solid blue or black screen which ...HobbyWireless
10.1" INCHES LCD-LED HIGH RESOLUTION MONITOR CUSTOMIZED FOR FPV (SCREEN NEVER GOES BLUE OR BLACK)
Model | EV-10 |
Screen | 10.1" inches TFT LCD LED Backlit |
Brightness | 250cd/m² |
Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
Contrast Ratio | 500 |
Response time | 8ms |
Dimensions W x H x D | 10" x 6.4" x 1.34" (255 x 163 x 34 mm) |
Weight | < 900 grams |
Resolution | 1024 x 600 pixels |
Video input | 2 (Video 1 or Video 2) |
Input Signal | RCA Video 1 - RCA video 2 - RCA Audio - HDMI - VGA |
Color System | PAL/NTC/SECAM (manually selected by the user) |
Operating Voltage | Input 7-18VDC (3s-4s lipo battery can be used) |
Working Temperature | -20℃~60℃ |
Storage Temperature | -30℃~70℃ |
Manufacturer Warranty | 90 days |
Details:, The EV10 is an awesome 10.1" inches high resolution LED monitor tailoired for FPV and outdoor applications., Specifications:, Power Consumption: 8W, Note: The monitor has 2 video inputs (yellow plugs). Only video 2 input will never goes black or blue if the video reception is weak/poor, use it for FPV.,
I will never go solid blue or black screen which ...