HobbyWireless
7" INCHES LCD-LED MONITOR CUSTOMIZED FOR FPV (SCREEN NEVER GOES BLUE OR BLACK)
| Model | EV7 |
| Screen | 7" inches TFT LCD LED Backlit |
| Dimensions W x H x D | (182 x 127 x 32mm) 7.16" x 5." x 1.25" |
| Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
| Contrast Ratio | 500 |
| Weight | < 650 gr (1.35lb) |
| Resolution | 800 x 400 pixels |
| Brightness | 450cd/m2 |
| Audio input | 1 (mono) |
| Input Signal | RCA Video |
| Color System | PAL/NTC/SECAM (manually selected by the user) |
| Operating Voltage | Input 6-18VDC |
| Power Consumption | <5W |
| Working Temperature | -20℃～60℃ |
| Storage Temperature | -30℃～70℃ |
| Manufacturer Warranty | 90 days |
Details:, The EV7 is an awesome 7" inches high resolution LED monitor tailoired for FPV and outdoor applications., Specifications:, , Video input: 1, Includes:,
It will never go solid blue or black screen, it ...HobbyWireless
R5800B 5.8 GHZ POCKET SIZE HIGH SENSITIVITY RECEIVER
| - Selectable channels | Press Button |
| CH1 | 5733 - CH2 |
| - Working voltage | 8-12 VDC |
| - Receiving sensitivity | < -90dBm |
| - Receiving frequency | ISM 5.8GHz 8CH |
| - Antenna port | 50ohm SMA |
| - Antenna | Gain |
| - Power supply | DC12V 220mA |
| - Video output level | 1Vp-p @ 75ohm |
| - Audio output level | 1Vp-p @ 10Kohm |
| - Dimensions | 72.5x54.2x15.5mm |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
| Note | This receiver is compatible with |
Details:, , Note:, to use any other antenna besides the original an, Powering the receiver:, Connect power (8-12V) to the receiver, and then press and hold the receiver’s power button until the display comes on., - Working Frequencies:,
This receiver is a perfect match for TX-V582 and TX-V584 ...HobbyWireless
STEPUP FOR 12V CAMERAS
Details:, Provides a simple way to power 12V cameras from the 5V camera output on all ImmersionRC video transmitters.,
Additionally it can be powered off of a 5 ...HobbyWireless
IMAX B6 80 AC
Details:, A great value for the money! This charger will handle 80 amps and 6w of total power. No power supply is needed. Everything you need to get started is included. This is the perfect charger for those flying micro to 500 size machines and any surface vehicle., Specifications:,
AC input 140-240 volts DC input 11-18 volts Circuit Power ...HobbyWireless
LOCOSYS SMART GPS ANTENNA 5HZ MODULE
Details:, LS20033 series products are complete GPS smart antenna receivers, including an embedded antenna and GPS receiver circuits, designed for a broad spectrum of OEM system applications. The product is based on the proven technology found in LOCOSYS 32 channel GPS SMD type receivers MC-1513 that use MediaTek chip solution. The GPS smart antenna will track up to 32 satellites at a time while providing fast time-to-first-fix, one-second navigation update and low power consumption. It can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications., GPS receiver:, , :Click here,
* 5Hz max update rate * Default 57600bps * Update ...HobbyWireless
ANKER® 10000MAH DUAL 5V 3A USB OUTPUT EXTERNAL BATTERY PACK CHARGER
| Dual USB ports | charge one device with up to 3A output, or charge dual devices at 3A total max |
| Input | 5V / 1.5A (max) |
| Output | 2x USB 5V / 3A (@3A total max) |
| Size | 5.6 x 2.8 x 0.6 inch; Weight |
| Input charging time | 8-10h via standard USB |
| Note | Make sure your device has a compatible port. |
Details:, This is a great back-up battery and portable charger to your phone and FPV devices such as GoPro camera, mini recorder and other equipment that needs 5V to be powered up.,
There is nothing worse than hit the road and found ...HobbyWireless
NAGOYA NA-773 TELESCOPIC ANTENNA BNC
| ► Frequency | 144/430MHz. |
| ► Gain | 2.15db. |
| ► Max power | 10Watts. |
| ► V.S.W.R | Less 1.5. |
| ► Impedance | 50 OHM. |
| ► Connector | BNC. |
| ► Length | Normal 125mm / Lengthen 420mm. |
| ► Weight | 40g. |
Details:, This is original Nagoya antenna NA-773 Dual Band BNC., Specifications:,
It will boost the signal significantly. It can be used ...HobbyWireless
NAGOYA NA-771 ANTENNA FLEXIBLE BNC
| ► Frequency | 144/430MHz. |
| ► Gain | 2.15db / 3.0db. |
| ► Max power | 10Watts. |
| ► V.S.W.R | Less 1.5. |
| ► Impedance | 50 OHM. |
| ► Connector | BNC-Male. |
| ► Length | 396 mm. |
| ► Weight | 53g. |
Details:, This is original Nagoya antenna NA-771 Dual Band BNC., Specifications:,
It will boost the signal significantly. It can be used ...HobbyWireless
NAGOYA NA-771 ANTENNA FLEXIBLE SMA MALE
| ► Frequency | 144/430MHz. |
| ► Gain | 2.15db / 3.0db. |
| ► Max power | 10Watts. |
| ► V.S.W.R | Less 1.5. |
| ► Impedance | 50 OHM. |
| ► Connector | SMA-Male. |
| ► Length | 396 mm. |
| ► Weight | 53g. |
Details:, This is original Nagoya antenna NA-771 Dual Band, Specifications:,
SMA connector It will boost the signal significantly. It can ...HobbyWireless
NAGOYA NA-401 FLEXIBLE ANTENNA SMA MALE
| ► Frequency | 144/430MHz |
| ► Gain | 2.15db |
| ► Max power | 10 Watts |
| ► V.S.W.R | Less 1.5 |
| ► Impedance | 50 OHM |
| ► Connector | SMA-MALE |
| ► Length | 227mm |
| ► Weight | 19g |
Details:, Handheld antenna NA-401 144/430MHz Dual BAND, Specifications:,
SMA connector . Can be used for EzUHF receivers and ...HobbyWireless
HIGH EFFICIENCY LOW PROFILE HEAT SINK FOR TRANSMITTERS
| Outline | 23.11mm x 23.11mm |
| Height | 0.35" (9mm) |
| Material | Aluminum |
| Attachment Method | Thermal Tape, Adhesive (Included) |
Details:, This heatsink is highly recommended for small high-powered transmitters., Specs:,
It has self-stick adhesive fitting perfectly on any of our ...HobbyWireless
OSD PRO EXPANDER
| Web Site | http |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, The OSD Pro Expander is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, a flight simulator for testing, and many other features. The information displayed can be as simple or advanced as you like, depending on how you configure the display, and on which optional Eagle Tree sensors are connected., All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , E-mail:, sales@eagletreesystems.com,
Click here to read the OSD Pro Manual (PDF). GPS ...HobbyWireless
GAUI 500X QUAD FLYER UPGRADE KIT
| Crossing distance | 500mm motor shaft to motor shaft |
| Propeller size | 8~10 inch.(Option, not included in this package) |
| Motor | 960KV brushless motor (Option, not included in this package) |
| ESC | 10~18A ESC (Option, not included in this package) |
| Stabilizer System | GU-344 (Option, not included in this package) |
| Weight | 520~670g (with recommended standard power package, without battery) |
Details:, This is any upgrade kit, great kit for the 330X owners or even to those wanting to install their on electronics., Features:, ,
It has a neat and well built carbon fiber Frame, ...HobbyWireless
WI-FI REMOTE
Details:, Control your GoPro camera remotely with the Wi-Fi Remote. Access all your GoPro camera settings, power ON/OFF and start/stop recording. The Wi-Fi Remote makes using the GoPro convenient and easy., What's Included:, Wi-Fi Remote,
Control up to 50 cameras at a time from up ...HobbyWireless
3M DOMINATOR AV CABLE
Details:, This 3m AV cable allows the user to share base station power source via the Y power connector and the RCA terminated leads plug into common external receivers. This cable is compatible with Dominator, Predator and Classic headsets.,
Note , for use with ImmersionRC receivers need to combined ...