HobbyWireless
CYCLOPS STORM OSD SYSTEM - GPS AUTOPILOT
Power input | 3S Lipo |
Weight Main Board | 12g |
Current sensor | 30V, 100A |
Package Weight | 58g |
Video format supported | auto detect PAL or NTSC |
Details:, , Note:, It comes with the latest firmware version not beta.,
If you're looking for an easy, reliable, full of features ...HobbyWireless
DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)
Details:, , The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,
The new DJI Downlink is specially designed to work with ...HobbyWireless
TURNIGY 302AD - PIEZO HEAD LOCK & STANDARD GYRO
Features | Ultra small & light |
Voltage used | 4.2 - 7V |
Power consumption | Approx 33mA |
Operation temp | -5C - 60C |
Dual Mode | Head Lock and Standard |
Details:, The TR302-AD is compatible with both Digital and Analog systems., Specifications:, ,
Drift Cancel Circuit Temperature Compensation Circuit Head lock and standard ...HobbyWireless
RSSI METER
Supply Voltage | 7 - 14VDC / 10mA |
Min RSSI Voltage | 0.0VDC |
Max RSSI Voltage | +5.0VDC |
RSSI Scaling | User configurable |
RSSI Impedance | ~57K ohms |
Character Height | Large 0.5-inch (12.7 mm) |
Display Type | LCD (daylight visible / high contrast) |
Dimensions | 1.8 x 1.4 x 0.25 inches (45 x 35 x 6 mm) |
Weight | 6 grams |
Details:, The RSSI (relative signal strength indication) Meter displays a video receiver's analog signal strength as a 0-100% value. It is compatible with popular ham radio and wireless video receivers. Its large easy-to-read numeric LCD and simplified installation makes this a very exciting receiver mod!, Connection to your receiver requires three wires: Power, Ground, and RSSI signal. A simple push-button interface allows fast and easy signal strength calibration., Specifications/Features:, , Instructions Manual:, Click Here!,
The meter is fully assembled and includes a front panel ...HobbyWireless
RSSI BUFFER FOR OSD PRO
Operating Voltage | 5VDC (powered by EagleTree eLogger). |
Current Draw | 2 milliamps. |
RSSI Voltage Range | 0 - 4.0 VDC. |
RSSI Input ohms | > 1 megohms (DC). |
Input Impedance | 330K ohms (AC). |
Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
Operating Voltage | 5.0VDC (4.5 - 5.5 VDC allowed). |
Current Draw | 2 milliamps. |
RSSI Range | 0 - 4.0 VDC. |
RSSI Input ohms | > 1 megohm. |
RSSI Impedance | Input IN1 = 330K ohms @ 1KHz. |
Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
can be used with other OSD designs if the 3-wire cable’s pinout is observed, as follows | Black Wire |
Red Wire | Buffered RSSI signal output (to OSD) |
White Wire | Not Used (no connection) |
Details:, The RSSI Buffer is a tiny-sized accessory that is used to connect a R/C receiver's analog RSSI (relative signal strength indication) signal to the EagleTree eLogger V3 / OSD Pro system. It uses the TEMP1 input on the eLogger V3 telemetry module., Specification and Features:, Installation Instructions:, Click Me!, Installation Video:, Click Me!, Cable Pin-Out Information:, , Note:, Common circuit ground is provided by the IN1 or IN2 signal ground connection. Please,
This RSSI buffer is recommended for all EagleTree OSD-Pro installations ...HobbyWireless
NANO MICROPHONE W/VOLUME CONTROL
Red | DC Power, 4VDC to 15VDC (connect to your transmitter's red wire) |
Black (or Brown) | Ground (connect to your transmitter's black wire) |
White (or Orange) | Audio Out (connect to your transmitter's white wire) |
Details:, If you liked the Tiny-Mic product, the new Mini-Mic should really excite you. It is the same quality adjustable volume, micro-phone as the Tiny-Mic, but is only 1/4 the size and weight, making it the ideal microphone for smaller models where size/weight are issues., Features:, , Wires functions:, , Volume Adjustment:, , Note:, The Nano Mic is NOT reverse polarity protected. Incorrect connections may cause damage and will void the warranty.,
It comes complete with 3-pin Futaba plug, or you can ...HobbyWireless
MINI GSM-GPRS-GPS TRACKER
- Weight | 44g |
- Band | 850/ 900/1800/1900Mhz or 900/1800/1900Mhz |
- GPS Chip | SIRF3 Chip |
- GPS Sensitivity | -159dBm |
- Power | 3,7V (bateria li-ion incluida) |
Details:, Here is a powerful FPV device to track down your R/C model in case you lose it., - Size: L:71mm x A:44mm x A:20mm, The package includes:, - GPS / GSM Receiver,
The Tracker has a very sensitive GPS with a built-in ...HobbyWireless
LVBOOST - BOOST CONVERTER
Details:, LVBoost is a boost converter that can take voltages as low as 0.5V and convert them into higher, more useful voltages like 3.3V or 5V. It has an exceptionally low quiescent draw - typically under .4mA. these features make LVBoost a great choice for powering projects from solar or other renewable energy sources., Model:, , Specifications:, , Applications:,
From a 3V input, 500mA @5V out is easily achievable, ...HobbyWireless
FRSKY DHT 8CH DIY TELEMETRY COMPATIBLE TRANSMITTER MODULE
Operating voltage | 6.0V-13.0V (can handle 3S!) |
Power consumption | 50mA |
Resolution | 3072 (11bit) |
Dimensions | 55x34x8mm |
Details:, FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!, Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced technology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., :, Output Power:: 60mW, :, 1 x DHT DIY Transmitter Telemetry module,
The Two-way Radio System developed by FrSky provides an additional ...HobbyWireless
FRSKY DH-U SENSOR HUB, SENSORS AND LCD-FDD_LITE
Voltage Division Ratio (selectable) | A1/A2/Voltage |
Unit Set (selectable) | Speed (m/s or MPH) |
Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 46*25MM |
Pixel | 128*64 |
Model | DHT-U |
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 3072 (>11bit) |
Weight | 74g |
Details:, DH-U combo DHT-U 2.4GHz telemetry system., Features:, Show in-flight data via in-built display;, Note: Due to incaution, pins definition for Aurora 9 on the guide sheet of "Pins Definition for PPM Signal" going with certain DHT-U combo was mislabeled.,
It's a duplex built-in receiver and 2.4 GHz transmitter module. ...HobbyWireless
DJT/D8R-II PLUS TELEMETRY COMBO RX/TX FOR JR
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 11bit (3072) |
Details:, , JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX-22, MX-24S, PX, 9XII, Note:, All technical questions about FrSKy products must to be emailed to frsky@frsky-rc.com,
This combo receiver and tarnsmitter module will not only give ...HobbyWireless
DFT/D8R-II PLUS TELEMETRY COMBO RX/TX FOR FUTABA, HITEC, WFLY
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 11bit (3072) |
Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
Hitec | Optic 6, Eclipse 7, Prism 7. |
WFLY | WFT09, WFT08. |
Details:, , Note:, All technical questions about FrSKy products must to be emailed to frsky@frsky-rc.com,
This combo receiver and tarnsmitter module will not only give ...HobbyWireless
HW 3S 11.1V 860MAH 35C LITHIUM POLYMER BATTERY PACK (LI-PO)
Capacity | 860mAh |
Type | 11.1v / 3Cell 3S1P Lithium Polymer |
Constant Discharge | 35C |
Pack Weight | 1.7 oz (48g) including wires and connectors |
Pack Size | 55 x 29 x 19mm |
Charge/Balancer Plug | JST-XH |
Power Connector | JST male |
Details:, ,
This is high quality batteries not over rated as many ...HobbyWireless
HW 3S 11.1V 2200 35C LITHIUM POLYMER BATTERY PACK (LI-PO)
Capacity | 2200mAh |
Type | 11.1v / 3Cell 3S1P Lithium Polymer |
Constant Discharge | 35C |
Pack Weight | 6.2 oz (175g) including wires and connectors |
Pack Size | 105 x 32 x 23mm |
Charge/Balancer Plug | JST-XH |
Power Connector | Deans |
Details:, ,
This is high quality batteries not over rated as many ...HobbyWireless
11.1V 3S 1000MAH 20C LIPO BATTERY W/ JST MALE
Capacity | 1000mAh |
Configuration | 3S1P / 11.1v / 3Cell |
Constant Discharge | 20C |
Peak Discharge (10sec) | 30C |
Pack Weight | 87g |
Pack Size | 69 x 35 x 17mm |
Charge Plug | JST-XH |
Details:, Great Lipo battery to power an FPV onboard system (transmitter and camera).,
These batteries are fully tested.