HobbyKing
HOBBYKING ECO8 150W 7A 8S BAL/DIS/CYC CHARGER W/ ACC.
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~7.0A |
| Ni-MH/NiCd cells | 1~27 |
| Li-ion/Poly cells | 1~8 |
| Pb battery voltage | 2~36v |
| Weight | 574g |
| Dimensions | 170x110x35mm |
| Note | Power supply not included. |
3 Reviews
HobbyKing
TURNIGY MAX80W 7A LITHIUM POLYMER BATTERY CHARGER
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~7.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 300g |
| Dimensions | 135x100x40mm |
| Note | Power supply not included. |
5 Reviews
HobbyKing
G.T.POWER A8 8CELL BALANCER/CHARGER
| Operating voltage range | 10.0~18.0Volt |
| Circuit power | max. 150W |
| Charge current range | 0.1~7.0A |
| Discharge current range | 0.1~5.0A |
| Current drain for balancing Li-Po | 300mAh/cell |
| NiCd/NiMH battery cell count | 1~27 cells |
| Lithium bettery cell count | 1~8 Series |
| Pb battery voltage | 2 to 36V |
| Weight | 674g |
| Dimensions | 170X110X35mm |
| http | //www.hobbyking.com/hobbyking/store/uploads/55085257X208127X4.pdf |
| Note | Power supply not included. |
5 Reviews
HobbyKing
B6-AC PLUS - CHARGER/DISCHARGER 1-6 CELLS DUAL POWER (COPY)
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~5.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 645g |
| Dimensions | 145x134x40mm |
Note:, This kit does not include an XT-60 adapter. Please see the related item below if you use XT-60 plugs with your batteries.,
This is a copied B6-AC Plus charger. Its quality and ...5 Reviews
HobbyKing
TURNIGY MEGA 400W V2 LITHIUM POLYMER BATTERY CHARGER (VERSION 2)
| Note | Temperature sensor not included. |
| Input voltage | 11.0 – 18.0Volt |
| Charge current | 0.1 – 20.0A |
| Discharge current | 0.1 – 5.0A |
| Maximum discharge capacity | 25W |
| Current drain for balancing Li-po | 200mAh/cell |
| Lithium (LiPo/LiIo/LiFe) battery cell count | 1 – 6 series |
| NiCd/NiMH battery cell count | 1 – 18 series |
| Pb battery voltage | 2 –24V |
| Intelligent temperature control | Yes |
| Weight | 815g |
| Dimensions | 146x144x56mm |
Maximum charge capacity:, 400W @ input voltage >15V, Battery setup memories:10, Note:, Power supply and temperature sensor not included.,
Take advantage of the new high C charge rate on ...5 Reviews
HobbyKing
BATTERY POWERED HOT GLUE GUN
| Operating Voltage | 12VDC |
| Power | 10W |
| Power Plug | XT60 |
*Note:, This glue gun does not feature a low voltage cutoff circuit, so we recommend using a low voltage battery alarm to monitor the input battery to avoid over-discharging. Please see related items below., Specs:,
Remember the last time you were at the field and ...5 Reviews
HobbyKing
HOBBYKING LIPO TO USB CHARGING ADAPTER
| Input | 2S 7.4V |
| Output | 5V DC 1A |
| Dimensions | 13x20x55mm |
| Weight | 20g |
Features:, Compact and lightweight design, Specs:,
The Hobbyking lipo to USB charging adapter is a very ...5 Reviews
HobbyKing
GT A-6 CHARGER/BALANCER/DISCHARGER
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~6.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 380g |
| Dimensions | 133x98x30mm |
| Note | Power supply not included. |
HobbyKing
SOLDERING IRON 30WATT 12V / 3S XT60 PLUG
| Operating Voltage | 12VDC |
| Power | 30W |
| Power Plug | XT60 |
*Note:, This Soldering Iron does not feature a low voltage cutoff circuit, so we recommend using a low voltage battery alarm to monitor the input battery to avoid over-discharging., Specs:,
Remember the last time you were at the field and ...5 Reviews
HobbyKing
HOBBYKING ECO SIX 80W 6A 2~6S BATTERY BALANCE CHARGER AC/DC W/PSU
| Input Voltage | 11~18v (in-built 100~240V AC to DC power supply) |
| Circuit power | Max Charge |
| Charge Current Range | 0.1~6.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/LiPo/LiFe cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 490g |
| Dimensions | 135x61x112mm |
Features:, • In-built 100~240V AC to DC power supply, Specs:,
Capable of charging any size Lipoly battery up to 6 ...5 Reviews
HobbyKing
3E LIPO CHARGER 2-5CELL W/ BALANCER
: 12-24v DC, : 1.3A Steady (4.2v steady Voltage),
3E Lipo Charger 2-5Cell w/ Balancer This device can balance ...5 Reviews
HobbyKing
GT A-6-10 200W BALANCE CHARGER & DISCHARGER
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| 200W / Max Discharge | 25W |
| Discharge current range | .1~5.0A |
| Ni-MH/NiCd cells | 1~18 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 540g |
| Dimensions | 145x125x38mm |
| Note | Power supply not included. |
Charge Current Range: .,
The GT A6 is a very advanced charger, able to ...HobbyKing
XT60 TO HXT 3.5MM CONNECTOR BATTERY ADAPTER (COMPATIBLE WITH WALKERA QR X350) (2PCS/BAG)
,
XT60 to HXT 3.5mm Connector Battery Adapter (compatible with Walkera ...