HobbyKing
TURNIGY NANO-TECH 1700MAH 2S1P 20~40C LIFEPO4 RECEIVER PACK
| Capacity | 1700mAh |
| Dimensions | 56 x 31 x 34mm |
| Balance Plug | JST-XH |
| Discharge Plug | JST & Futaba |
*Note:, This is a, Voltage:, 2S1P / 2 Cell / 6.6V, Discharge:, 20C Constant / 40C Burst, Weight:, 97g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 1450MAH 2S1P 20~40C LIFEPO4 RECEIVER PACK
| Capacity | 1450mAh |
| Dimensions | 85 x 34 x 16mm |
| Balance Plug | JST-XH |
| Discharge Plug | JST & Futaba |
*Note:, This is a, Voltage:, 2S1P / 2 Cell / 6.6V, Discharge:, 20C Constant / 40C Burst, Weight:, 85g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2000MAH 2S1P 20~40C LIFEPO4 TRANSMITTER PACK
| Capacity | 2000mAh |
| Balance Plug | JST-XH |
| Discharge Plug | JR & Futaba |
*Note:, This is a, Voltage:, 2S1P / 2 Cell / 6.6V, Discharge:, 20C Constant / 40C Burst, : 109g (including wire, plug & case), : 90 x 42x 16mm,
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2100MAH 3S1P 20~40C LIFEPO4 TRANSMITTER PACK
| *Note | This is a |
| Capacity | 2100mAh |
| Dimensions | 97 x 30 x 30mm |
| Balance Plug | JST-XH |
| Discharge Plug | JR & Futaba |
Voltage:, 3S1P / 3 Cell / 9.9V, Discharge:, 20C Constant / 40C Burst, Weight:, 164g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2500MAH 3S1P 5~10C TRANSMITTER LIPO PACK
| Capacity | 2500mAh |
| Dimensions | 95 x 30x 24mm |
| Balance Plug | JST-XH |
| Discharge Plug | JR & Futaba |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 5C Constant / 10C Burst, Weight:, 147g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY 4X6S LITHIUM POLYMER BATTERY PACK CHARGER
| Operating voltage range | DC 11~15V |
| Power source | 12V DC (car battery) / AC mains PSU (>200Watts) |
| Cell count | 1-15 Ni-xx / 1-6 Li-xx / 1-10 Lead acid cells (2~20V) |
| Current drain for balancing li-xx | 335mA |
| Charge termination Ni-xx | Automatic, negative Delta Peak method |
| Charge termination Lead acid & Li-xx | Automatic, voltage dependent, CC-CV process |
| Note | Power supply not included. |
Specification:, Maximum Charge Current per port: 6A,
Turnigy 4x6S can charge four batteries packs simultaneously! A quality ...5 Reviews
HobbyKing
PLUG-KING MULTI-19 MEGA CHARGE PLUG ADAPTER SET
,
The King of all charge leads! If it can not ...5 Reviews
HobbyKing
TURNIGY MEGA 400W V2 LITHIUM POLYMER BATTERY CHARGER (VERSION 2)
| Note | Temperature sensor not included. |
| Input voltage | 11.0 – 18.0Volt |
| Charge current | 0.1 – 20.0A |
| Discharge current | 0.1 – 5.0A |
| Maximum discharge capacity | 25W |
| Current drain for balancing Li-po | 200mAh/cell |
| Lithium (LiPo/LiIo/LiFe) battery cell count | 1 – 6 series |
| NiCd/NiMH battery cell count | 1 – 18 series |
| Pb battery voltage | 2 –24V |
| Intelligent temperature control | Yes |
| Weight | 815g |
| Dimensions | 146x144x56mm |
Maximum charge capacity:, 400W @ input voltage >15V, Battery setup memories:10, Note:, Power supply and temperature sensor not included.,
Take advantage of the new high C charge rate on ...5 Reviews
HobbyKing
TURNIGY 4X6S 400W LITHIUM POLYMER BATTERY CHARGER
| Operating voltage range | DC11.0-18.0V |
| Discharger power | 32W |
| Charge current range | 0.1A-10A |
| Discharge current range | 0.1A-5A |
| Weight | 1100g |
| Dimensions | 190x153x60mm |
Specification:, Charge power:, 400W (100W per channel), Cell count:, 1-15 NiCd/NiMH cells, Including:, 1 x Turnigy 4x6s 400W charger, Note:, Power supply not included.,
Turnigy 4x6S can charge four batteries packs simultaneously! A quality ...5 Reviews
HobbyKing
HOBBYKING XD-6 BALANCE CHARGER PLUS ACCESSORIES 240W (4 X 60W)
| Operating voltage range | DC 11~18V |
| Discharge Current Range for Each Port | 0.1A~1.0A |
| Current Drain for Balancing Lithium | 300ma |
| Charge Power | Max 60w Per Port |
| Discharge Power | Max 5w Per Port |
| Weight | 995g |
| Features | Twin Cooling Fans |
| Including | 1 x TQ4 charger |
| Note | Power supply not included. |
Specification:, Cell count :, 1-15 Ni-xx / 1-6 Li-po~Li-Ion~LiFe / 1-10 Lead acid cells (2~20V), Charge termination Ni-xx:, Automatic, negative Delta Peak method, Charge termination Lead acid & Li-xx:, Automatic, voltage dependent, CC-CV process, Maximum Charge Current per port:6A, Dimensions:, 230mm x 158mm x 60mm,
Hobbyking XD-6 can charge four different or the same type ...5 Reviews
HobbyKing
TURNIGY MEGA 300W 8S BALANCE CHARGER/DISCHARGER (150W X 2)
| Input Voltage | 11~18v DC |
| Charge Current Range | 0.1~7.0A |
| Discharge Current | 0.1~5.0A |
| Discharge Power | 2x50watt |
| Balance Current Drain | 200mAh/cell |
| Li-XX Cell Count | 1~8s |
| Ni-XX Cell Count | 1~27cells |
| Pb Battery Voltage | 2~36v |
| Intelligent Temp Control | Yes |
| Cooling | Dual Fan |
| Weight | 903g |
| Dimension | 188x136x58.5mm |
Note:, You will need a power supply exceeding 30Amps for bench top use!, Features:, • Dual power output 150Wx2 (300W total), Specs:, Charging Output:, 2 x 150W (300w Total), Battery Setup Memories:10, Includes:, 1 x JST-XH balance board,
Tired of carrying two chargers to the field? Need serious ...5 Reviews