RCModelScout.

ReadyMadeRC

ZEISS CINEMIZER HEADTRACKER

GetFPV

QAV500 BRUSHLESS GIMBAL UPGRADE (PRE-ORDER)

Gimbal Control Board:, We recommend the AlexMos board., Props:, Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro protection:, The QAV540G gimbal that is part of this upgrade requires the GoPro to be placed into the gimbal without the GoPro case. We recommend you buy a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

GetFPV

QAV540G BRUSHLESS GIMBAL AIRFRAME (PRE-ORDER)

Landing Gear:, You can choose between the, Gimbal Control Board:, We recommend the AlexMos board., Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro Lens Protection:, The QAV540G gimbal requires the GoPro to be placed into the gimbal without the GoPro case. We recommend a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

BevRC

FY41AP LITE

Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download :, Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module . UART1 is the interface connects to the data radio, computer serial port to do the firmware upgrade for FY-41AP Lite control module.If you want to upgrade the firmware of FY-41AP Lite OSD module,please, Integrated OSD Video Overlay System, FY-41AP Lite overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module. UART2 is the interface connects to the computer serial port to do the firmware upgrade for FY-41AP Lite OSD module.If you want to upgrade the firmware of  flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;,

HobbyKing

EAGLETREE HEAVY DUTY E-LOGGER V4 WITH WIRE LEADS, 80 VOLTS, 150 AMPS

NEW: Eagle Tree continues to innovate in data collection with the eLogger V4. In addition to greatly enhanced resolution and accuracy, the V4 now supports voltage to 80 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!, Here are the key features of the MicroPower:, Logs pack current to +/- 100 amps and voltage from about 4.5 volts to 45 volts, NEW: Accepts optional inexpensive sensors for Temperature, RPM (brushless, magnetic or optical), GPS, Airspeed, Altitude, Servo Current, Throttle Movement, and more, available below,

LowPriceRC

FEIYU FY31AP PATH NAVIGATION & HORNET OSD COMBO

,

ReadyMadeRC

FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS

,

ReadyMadeRC

FY-91Q STABILIZER

,

ReadyMadeRC

FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM

,

ReadyMadeRC

TINY 5V REGULATOR

IMPORTANT:, This tiny regulator using a LDO chip and converts the voltage difference to "heat". Regulator chip including a thermal shutdown on 125 degree Celsius and it can handle 800mA current easily if you can cool it. We are suggesting to maximum, : 7-18V (2-4S LiPO), : 5 volt, : 500mA nominal 1A ma, : 0.65gr,

ReadyMadeRC

GUARDIAN 2D/3D INERTIAL STABILIZER (STAND ALONE)

Q: Why do I need the Guardian?, The Guardian helps both beginner and expert pilots fly with confidence, and provides two key modes of operation:, In 2D flight mode, Q: Will the Guardian work with my model?, Q: I Fly FPV. Is the Guardian for me?, Q: How do I install the Guardian?, Q: How do I configure the Guardian?, Q: How does the Guardian work?, Q: What sets the Guardian apart from other Stabilization systems out there?, Q: I want one for each of my planes! When and where can I buy it??, Q: Where can I find more details?, Q: You are missing the feature I want! How do I tell you what you need to add?, * Note: a standard "micro" USB cable, used commonly with mobile phones and eBooks, is not included but is required for PC configuration and firmware update. You probably already have one, but if not, you can purchase it from us or elsewhere.,

ReadyMadeRC

FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM

FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,

ngHobbies

ADJUSTABLE 1AMP STEP-DOWN POWER REGULATOR

Specifications:, , Dimensions:, Documentation:,

ngHobbies

FATSHARK MIG HEADTRACKER

Features:, Built in gyroscopic sensors, Weight:, 150 gr., Documentation:,

ngHobbies

OSD PRO SYSTEM 10HZ GPS, 150A ELOGGER V4 W/ WIRE LEADS

This is a ready to fly package with the following inside:, 1 x e-Logger V4 150A with integrated connectors., Manuals:, eLogger Manual,