ReadyMadeRC
FAT SHARK DOMINATOR VIDEO GLASSES
Features:, Form fitting silicone eye cups, Note for warranty claims for goggles:, The screens in all types of video goggles are susceptible to damage from the sun. Care should be taken to avoid direct sunlight into the eyepieces. Dead or damaged pixels from sun damage are not covered under the manufacturers warranty. Also, from time to time there may be a dead pixel on any LCD display. An isolated dead pixel is not covered under warranty or replacement. Only display issues that affect the picture quality such as multiple pixels are covered under warranty, and any groups of dead pixels must be reported within 1 week of receipt of the goggles.,
Experience the new Dominator; an innovative 3rd generation FPV headset ...ReadyMadeRC
DRAGONOSD+ V2 COMBO: OSD, CURRENT SENSOR, AND GPS
| This package includes | Dragon OSD V2 |
NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS. POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO! AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on. This will allow users of other connections to easily solder on their own connectors.,
The Dragon OSD+ v2 is the newest analog OSD from ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
EASY STAR/SKY SURFER/BIXLER ADJUSTABLE MOTOR MOUNT
| Position 1 | stock height up to a 6" prop. |
| Position 2 | (+) 0.41" for up to a 7" prop. |
| Position 3 | (+) 1.0" for up to an 8" prop. |
| Total Weight | 20g |
Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,
This CNC machined aluminum two piece mount is designed to ...ReadyMadeRC
EZOSD WITH XT60 STYLE POWER PLUGS
| EzOSD | The FPVers OSD |
| After-flight debriefing, shows a summary of the flight | Max. altitude, max. distance, max. speed, average speed, distance flown, etc. |
ReadyMadeRC
10HZ GPS EXPANDER MODULE
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) below is required.,
New GPS Expander Module based on the latest GPS technology. ...ReadyMadeRC
DJI FLAME WHEEL F550 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| MSRP | $126 F550 User Manual v1.0： |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 6× ESC(30A), 6× Motor(2212), 6× blades(10inch), 1× complete frame, Flame Wheel F550 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F550 ARF Kit set $390 FlameWheel series is ...ReadyMadeRC
DRAGONOSD+ V2 (MAIN UNIT, NO GPS OR CURRENT SENSOR)
| This package includes | Dragon OSD V2 |
ReadyMadeRC
FATSHARK BASE SD VGA VIDEO GLASSES
| interpupillary (ipd) distance | 59-69mm (adjustable) |
| power input | 7-13v (2s/3s supply) |
| power consumption @12vdc | 100ma |
| weight | 120g |
| option 1 | the |
| Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
package includes:, , specifications:, , Option 2: If you want to share the power supply with your ground station, the included cable allows for that. You simply feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the included cable, and then plug the extra power plug included on the cable into your video receiver/ground station so you are powering both devices with the same battery.,
built for serious fpver’s, the new base sd goggle is ...ReadyMadeRC
FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER
| mail us | service |
The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,
Introduction FY-901 has integrated three-axis gyro and three-axis accelerometer, which ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER WITH GPS
INCLUDES:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, , For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER
Included in this version:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, ●, For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
FATSHARK TRINITY HEAD TRACKER MODULE FOR DOMINATOR GOGGLES
,
Trinity Head Tracker Trinity is the epic result of pairing ...ReadyMadeRC
FATSHARK UNIVERSAL CAMERA CABLE
Cable works with the 1.25mm connector of the following models:,
600TVL FPV Tuned CMOS Pilot Cam CCD V2 black label ...ReadyMadeRC
FAT SHARK TELEPORTER V3 VIDEO GLASSES WITH PILOTHD V2
Predator V3 RTF FPV kit includes:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
The best value RTF FPV system just got better. The ...