RCModelScout.

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER

Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)

Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,

GetFPV

LAYERLENS FOR GOPRO3 (V2)

For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,

GetFPV

LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)

NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

GetFPV

LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)

NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

GetFPV

LAYERLENS FOR GOPRO3 (V2)

For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,

GetFPV

DJI WOOKONG MULTI-ROTOR AUTOPILOT

Start Motor: When using WKM, pushing throttle stick before takeoff will not start motors. You have to execute any one of following four Combination Stick Commands (CSC) to start motors.,

GetFPV

FATSHARK BASE SD VIDEO GOGGLES

GetFPV

FATSHARK PREDATOR V2 VIDEO GLASSES W/TRANSMITTER AND CAMERA

,

GetFPV

OSD PRO PKG WITH 100A ELOGGER/WIRE LEADS AND GPS

There are lots of OSD choices out there. Here are a few reasons why the OSD Pro may be your best option:, Modularity:, If we come out with a newer version of one of the OSD Pro components, you only need to upgrade that component to have the latest and greatest system, rather than having to replace your entire OSD system when a new one comes along., Easy setup:, The OSD Pro is easy to configure exactly like you want it, with the included software., Stabilization:, with the new Guardian Stabilization Expander, the OSD Pro provides full model stabilization with no additional stabilization equipment to buy., Expandability:, Eagle Tree offers myriad sensors that are fully compatible with the OSD Pro. Since we make these sensors ourselves, you're guaranteed that they will be plug and play, with no soldering, finger pointing, or headaches., Powerful features:, The OSD Pro offers advanced features, such as Voice Alerts, Programmable Alarms, "RADAR" synthetic map, "Return to Home", RSSI and multiple battery voltage displays, built-in Flight Simulator for setup testing,Artifical Horizon display, acoustic variometer, waypoints, full Data Logging with GoogleEarth and graphing with the powerful software., World class support:, Eagle Tree has a full time, dedicated support staff, should you ever have a problem. They offer 24/7 support with their, Easy upgradability:, We are constantly adding new features and enhancements to the firmware. These are just a download away. The OSD Pro's built-in USB connection makes it easy to update firmware with the powerful software. No need to buy a separate USB adapter, build any special cables, or other complex steps for update., Part of a complete FPV system:, The OSD Pro is complimented by our EagleEyesTM Ground Station, and will soon be enhanced with the, for more details):, High speed logging at up to 50Hz (increased from 10Hz).,

GetFPV

GRAUPNER / GETFPV "BULLNOSE" 8X5 (1 PAIR)

,

GetFPV

TBS DISCOVERY PRO GIMBAL FRAME

The TBS CORE is famous for:, Accurate flight pack voltage and mAh consumption display, For those working on the assembly please read this primer:,

GetFPV

FRSKY DF 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX

Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., V8FT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,

GetFPV

FRSKY DJ 2.4GHZ COMBO PACK FOR JR W/ MODULE & RX

Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., FrSky DJTis compatible with JR transmitters following:, JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, PX, 9XII, 11XZERO, Turnigy 9x., Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,