ReadyMadeRC
MONO 1/8" (3.5MM) PLUG (FITS JR/SPEKTRUM/OTHER TRAINER)
Spektrum and many ..." />
,
Mono plug with 6' lead. Fits most JR/Spektrum and many ...ReadyMadeRC
DRAGONLINK SPEKTRUM/JR TX CABLE WITH POWER PLUG
,
Spare/replacement cable to connect a DragonLink V2 to a Spectrum/JR ...ReadyMadeRC
FAT SHARK HEAD TRACKER TO 3.5MM DATA CABLE (DX8, OTHER)
Note: Most JR/Spektrum radios do NOT have the correct trainer functions to work with a head tracker. So far, only the DX8 has been verified to work.,
This cable will allow you to hook up your FatShark ...ReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...ReadyMadeRC
OSD PRO PKG WITH 100A ELOGGER/WIRE LEADS AND GPS
| The plane icon labeled “RADAR” above serves two purposes | the direction the icon is pointing indicates your present course. |
| For example, you can program the OSD Pro to periodically update you on altitude once a minute | “Altitude 3-9-1 Feet”. |
Here are some examples:, , And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, , The package includes:,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...ReadyMadeRC
OSD PRO PKG WITH 150A ELOGGER/WIRE LEADS AND GPS
| The plane icon labeled “RADAR” above serves two purposes | the direction the icon is pointing indicates your present course. |
| For example, you can program the OSD Pro to periodically update you on altitude once a minute | “Altitude 3-9-1 Feet”. |
Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder, The package includes:,
OSD Pro Pkg with 150A eLogger /Wire Leads and GPS ...ReadyMadeRC
EZUHF JR STYLE TRAINER CORD TX ADAPTER
Spektrum, ..." />
Ready Made....they way it's supposed to be! :),
Now you can make the connection from your JR, Spektrum, ...ReadyMadeRC
EZUHF COMBO STARTER PACKAGE - LITE
| http | //fpvlab.com/forums/showthread....rade-procedure |
| http | //www.youtube.com/watch?v=gk46N8RKd2c&feature=channel_video_title |
Includes:, , Video describing how to connect to a JR radio if you want to make your own cable:, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
This combo gets you all you need to have a ...ReadyMadeRC
EZUHF COMBO STARTER PACKAGE - DIVERSITY
| http | //fpvlab.com/forums/showthread....rade-procedure |
| http | //www.youtube.com/watch?v=gk46N8RKd2c&feature=channel_video_title |
Includes:, , Video describing how to connect to a JR radio if you want to make your own cable:, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
This combo gets you all you need to have a ...ReadyMadeRC
OSD PRO PKG WITH 100A ELOGGER/INTEGRATED CONNECTORS AND GPS
| The plane icon labeled “RADAR” above serves two purposes | the direction the icon is pointing indicates your present course. |
| For example, you can program the OSD Pro to periodically update you on altitude once a minute | “Altitude 3-9-1 Feet”. |
Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder, The package includes:,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...ReadyMadeRC
FAT SHARK PREDATOR VIDEO GLASSES
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| User Controls | Channel selection |
| Power supply | 7 - 13 V (2S/3S supply) |
| Power consumption (@7.4V nominal) | 300mA wireless mode |
| Weight | 150g |
| Note | Fat Shark headsets use Airwaves brand RF modules. |
Package includes:, Predator goggles with integrated 5.8GHz receiver and MIG V4 head tracker, Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Head Tracker:, M.I.G. (magnetic/ inertial/ gyro) V4, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module,
Closeout pricing, cannot be back-ordered. FREE SHIPPING! FatShark quality on ...ReadyMadeRC
OSD PRO EXPANDER
All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - XT60
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, for doing acrobatics when you get bored just flying along. :) Great for holding 3D positio,
The Vector's wiring harness functions perfectly with RMRC camera and ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - WIRE LEADS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, ,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - DEANS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , Years in the making, the Vector has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...