DPCAV
FPV POD PAN & TILT KIT FOR TWINSTAR
| Note | Our photos do not show the camera tilt mount, but it is included |
| Manufacture's site | ReadyMadeRC |
The kit comes with two R/C servos, so it is a fantastic value. The provided camera mounting plate will fit many popular CCD cameras including:, DPC-171, KX131, KX171, DPC-520S, KX191 and others. An optional back plate is available that converts this kit for use with the DPC-420A, DPC-480A, and DPC-540A OSD cameras (, The kit includes:, Laser cut plywood components, You'll need to supply:, Double sided servo tape, Assembly manual:, Part-1 (cockpit pod), Assembly manual:, Part-2 (pan/tilt module),
This FPV Pod video camera pan/tilt kit is specifically designed ...DPCAV
FPV POD PAN & TILT KIT FOR EASYGLIDER PRO
| Manufacture's site | ReadyMadeRC |
The EasyPod kit comes with two R/C servos, so it is a fantastic value. The provided camera mounting plate will fit many popular CCD cameras including:, DPC-171, KX131, DPC-520S, KX171, KX191 and others. An optional back plate is available that converts this kit for use with the DPC-420A, DPC-480A, and DPC-540A OSD cameras (, The kit includes:, Laser cut plywood components, You'll need to supply:, Double sided servo tape, Assembly manual:, Part-1 (cockpit pod), Assembly manual:, Part-2 (pan/tilt module),
This FPV Pod video camera pan/tilt kit is specifically designed ...DPCAV
FPV POD PAN & TILT KIT FOR EASYSTAR
| Manufacture's site | ReadyMadeRC |
The EasyPod kit comes with two R/C servos, so it is a fantastic value. The provided camera mounting plate will fit many popular CCD cameras including: DPC-171, DPC-520S, KX131, KX171, KX191 and others. An optional back plate is available that converts this kit for use with the DPC-420A, DPC-480A, and DPC-480A OSD cameras (, The kit includes:, Laser cut plywood components, You'll need to supply:, Double sided servo tape, Assembly manual:, Part-1 (cockpit pod), Assembly manual:, Part-2 (pan/tilt module),
This FPV Pod video camera pan/tilt kit is specifically designed ...DPCAV
MPX SIX PIN CONNECTOR
Multiplex compatible) 6-pin connector is popular with R/C ..." />
| Data Sheet | Not Available. |
ngHobbies
STANDARD FPV PLUG AND PLAY PACKAGE
The Standard Plug and Play Starter Package:, Fatshark Dominator Base Goggles,
Pre-order only, some parts are out of stock!!! This is ...ngHobbies
DIVERSITY DUO 5.8 RECEIVER
| Receiver sensitivity | -85dBm |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 200 grams |
| Size | 80 x 100 x 23mm |
| Input voltage | 6 – 12V at 500 mA (3s Lipo Ideal) |
| Documentation | Coming soon |
Features:, A/V receiver with two (diversity) antenna inputs -,
The Immersion RC's Diversity Duo receiver is the best diversity ...ngHobbies
600MW 5.8GHZ COMBO
| Receiver sensitivity | -90dBm |
| Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz |
| Weight | 70 grams |
| Size | 72 x 43.5 x 11mm |
| Input voltage | 6 – 18V at 200 mA (2 or 3s Lipo Ideal) |
| Operating Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880MHz |
| Weight | 42 grams |
| Size | 45 x 28 x 18mm |
| Input voltage range | 8-12V |
The package contains:, 1 x Highly integrated mini 5.8GHz 600 mW transmitter with cooling fan, so it can be installed in closed spaces as well., Receiver:, A/V receiver with one antenna input, Transmitter:, 600mW output power, Documentation:, N/A, use the connection diagram in the photo below for connection clarification., Power Plug:, Middle pin positive, Manufacturer warranty:, 3 months from the date of purchase,
This is a combo deal for a plug and play ...ngHobbies
ADVANCED FPV PLUG AND PLAY PACKAGE
The Advanced Plug and Play Starter Package:, Fatshark Dominator Base Goggles,
Pre-order only, some parts are out of stock!!! This is ...ngHobbies
MINI 5.8GHZ RECEIVER
| Receiver sensitivity | -90dBm |
| Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz |
| Weight | 70 grams |
| Size | 72 x 43.5 x 11mm |
| Input voltage | 6 – 18V at 200 mA (2 or 3s Lipo Ideal) |
Features:, A/V receiver with one antenna input, Documentation:, N/A, see the below pictures for connectivity diagram and connection., Power plug:, Middle pin positive, Note:, This receiver may not be 100% compatible with Fatshark and Immersion transmitters even if the frequencies match.,
The Mini 5.8Ghz receiver is the smallest on the market ...ngHobbies
3DR RADIO TELEMETRY KIT - 915 MHZ
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground)., Documentation and Manuals:, 3DR Radio Configurator,
The system provides a full-duplex link using HopeRF's HM-TRP modules ...ngHobbies
FUNJET ULTRA ARF ELECTRIC RC AIRPLANE
Multiplex FunJet was one of ..." />
,
Just when you thought your Multiplex FunJet was one of ...ngHobbies
MULTIPLES CULARIS POWER PACK
Multiplex Cularis. ..." />
| Manual | none |
Content:, ,
This is a power combo pack for the Multiplex Cularis. ...ngHobbies
UNO 5.8GHZ V2 RECEIVER
| Receiver sensitivity | -85dBm |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 120 grams |
| Size | 80 x 70 x 22mm |
| Input voltage | 6 – 13V at 500 mA (3s Lipo Ideal) |
| Documentation | Coming soon |
Features:, A/V receiver with one antenna input,
The Immersion RC's 5.8Ghz UNO V2 receiver is the scaled ...ngHobbies
1200MW 5.8GHZ COMBO
| Receiver sensitivity | -90dBm |
| Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz |
| Weight | 70 grams |
| Size | 72 x 43.5 x 11mm |
| Input voltage | 6 – 18V at 200 mA (2 or 3s Lipo Ideal) |
| Operating Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880MHz |
| Weight | 67 grams |
| Size | 70 x 36 x 18mm |
| Input voltage range | 8-14V |
The package contains:, 1 x Highly integrated mini 5.8GHz 1200 mW transmitter with cooling fan, so it can be installed in closed spaces as well., Receiver:, A/V receiver with one antenna input, Transmitter:, 1200mW output power, Documentation:, N/A, use the connection diagram in the photo below for connection clarification., Power Plug:, Middle pin positive, Manufacturer warranty:, 3 months from the date of purchase,
This is a combo deal for a plug and play ...HobbyKing
FPV RADIO TELEMETRY KIT - 915MHZ
| Features | • Very small size |
| Band | 915MHz |
| Antenna connectors | RP-SMA connector |
| Sensitivity | -117dBm sensitivity |
| Interface | Standard TTL UART |
| Connection status | LED indicators |
Specs:, Output power:, 100mW (20dBm), adjustable between 1-20dBm, Includes:, Radio Telemetry base station (USB Connection),
This Radio Telemetry kit offers a great low price, longer ...5 Reviews