HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
| RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
| Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
| Supply current | depends on input voltage, but input power is 3 times RF out power |
| Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
| Temperature range | -40C to +70C tested |
| Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...Hobby-Lobby
SKYSCOUT P2GO
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | 3+ channel radio system |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
SKYSCOUT R2GO RTF
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | Hitec Lite 4 4-channel transmitter & Minima 6S receiver (included and installed, respectively) |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo (included) |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Charger | DC Balancing Charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
RAZZOR, ELECTRIC RACER, RECEIVER READY
| Assembly Time | Less than 1 Hour |
| Experience Level | Intermediate |
| Flying Weight | 10.6 oz (300 g) |
| Fuel Type | Electric |
| Is Assembly Required | Yes |
| Overall Length | 23.4 in (594mm) |
| Plane Type | Sport Planes |
| Power Plant Size | 180-280 Electric |
| Recommended Environment | Outdoor |
| Wing Area | 141 sq. in. (9.1 sq. dm.) |
| Wing Loading | 10.8 oz/sq ft (33.0 g/sq dm) |
| Wingspan | 24.4 in (620mm) |
Needed To Complete:, - 4+ channel transmitter, Technical Specifications:, Flaps: No, Retracts: No,
Fly on the cutting edge with the Razzor! The Razzor ...Hobby-Lobby
DOGFIGHTER AIRPLANE KIT
| Two Decal Sheets Included | "Racer" and "Fighter" |
| Wingspan | 35 in (889mm) |
| Overall Length | 32 in (813mm) |
| Flying Weight | 30 oz (851 g) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Is Assembly Required | Yes |
Dogfighter Airplane Kit Highlights:, Low Minimum Airspeed, Needed to Complete: Transmitter and Receiver radio system, Three sub-micro servos, Motor, ESC, Propeller, Flight Battery with compatible Charger, Technical Specifications:, Dogfighter Airplane Kit Specs:, Wing Area:, 296 sq in (19.1 sq dm), : 3-5 Hours,
Dogfighter Airplane Kit A fast and agile racer, the DogFighter, ...Hobby-Lobby
DOGFIGHTER AIRPLANE KIT
| Two Decal Sheets Included | "Racer" and "Fighter" |
| Wingspan | 35 in (889mm) |
| Overall Length | 32 in (813mm) |
| Flying Weight | 30 oz (851 g) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Is Assembly Required | Yes |
Dogfighter Airplane Kit Highlights:, Low Minimum Airspeed, Needed to Complete: Transmitter and Receiver radio system, Three sub-micro servos, Motor, ESC, Propeller, Flight Battery with compatible Charger, Technical Specifications:, Dogfighter Airplane Kit Specs:, Wing Area:, 296 sq in (19.1 sq dm), : 3-5 Hours,
Dogfighter Airplane Kit A fast and agile racer, the DogFighter, ...Hobby-Lobby
SKYSCOUT R2GO RTF
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | Hitec Lite 4 4-channel transmitter & Minima 6S receiver (included and installed, respectively) |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo (included) |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Charger | DC Balancing Charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
SKYSCOUT P2GO
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | 3+ channel radio system |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
SKYSCOUT R2GO RTF
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | Hitec Lite 4 4-channel transmitter & Minima 6S receiver (included and installed, respectively) |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo (included) |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Charger | DC Balancing Charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...RCPlanet
HITEC SKYSCOUT H2GO HRC13209
| Length | (977mm) |
| Wingspan | (1366mm) |
| Wing Loading | 25 g/sq dm |
| Wing Area | 28 sq dm |
| Center of Gravity (CG) | Approximately 3.3" (85mm) aft of the wing root leading edge on either side of the fuselage |
| Elevator | Up, 0.197" (5mm) Down, 0.157" (4mm) |
| Rudder | Right to Left, 0.393" (10mm) |
| Ailerons | Up, 0.315" (8mm) Down, 0.157" (4mm) |
, Control Throws-, , Note:, This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer., , ,
Hitec brushless electric powered, radio controlled, H2GO Sky Scout Airplane. ...RCPlanet
HITEC H2GO SKY SCOUT JR. MINIMA 6S HRC13217
, ,
This is the Hitec H2GO Sky Scout Jr. Minima 6S. ...ngHobbies
3DR RADIO TELEMETRY KIT - 433 MHZ
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground)., Documentation and Manuals:, 3DR Radio Configurator,
The system provides a full-duplex link using HopeRF's HM-TRP modules ...ngHobbies
3DR RADIO TELEMETRY KIT - 915 MHZ
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground)., Documentation and Manuals:, 3DR Radio Configurator,
The system provides a full-duplex link using HopeRF's HM-TRP modules ...