Skip to content

NitroTek

F-35 LIGHTNING 64MM GREY RC EDF JET PNP VERSION

  • Wing span
    		• 608mm 
  • Length
    		• 840mm 
  • Flying Weight
    		• 600g 
  • Wing Load
    		• 57g/dm2 
  • Wing area
    		• 8.7dm2 
  • Range
    		• 1000m

      ,
    • 9 gram servos 
      • ,
    • Brushless motor and 25A ESC 
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    • Is capable of the 'Cobra Manoeuvre'
      • ,
    ,

    The F-35 Lightning II is a, single-seat, single-engine, stealth multirole ...

    Read more

    NitroTek

    F14 TWIN 70MM JOLLY ROGER TOP GUN EDF RC JET PNP VERSION

  • Wingspan
    		• 1100mm
  • Length
    		• 1086mm
  • Flying Weight
    		• 1100-1300g
  • Twin motor
    		• Powerful 2430 outer runner brushless motor
  • Twin ESC
    		• 45A ESC 5A UBEC

      ,
    • Twin 70mm ducted fan
      • ,
    • With variable sweep wing, retract system
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Working swing wings
      • ,
    • Retractable landing gear
      • ,
    • Stunning paintwork
      • ,
    • Twin 70mm electric ducted fans
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep winged ...

    Read more

    NitroTek

    F-117 BLACKNIGHT STEALTH 70MM EDF RC JET PNP VERSION

  • Wingspan
    		• 734mm
  • Length
    		• 1100mm
  • Flying Weight
    		• 980g
  • Motor
    		• 2836 outer runner brushless motor 
  • ESC
    		• 45A ESC 5A UBEC

      ,
    • 70mm Ducted fan
      • ,
    • Seven 9g servos, one 17g servo
      • ,
    • Automatic landing gear system
      • ,
    • Steering front landing gear
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Automatic landing gear
      • ,
    • Stunning paintwork
      • ,
    • 70mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The Lockheed F-117 Nighthawk is a U.S. Airforce stealth ground ...

    Read more

    NitroTek

    F16 64MM RC JET VECTORED PNP VERSION IN BLACK AND GREY

  • Wingspan
    		• 800mm
  • Length
    		• 1020mm
  • Wing Load
    		• 35 g/dm²
  • Fly Weight
    		• 1100g

      ,
    • 7 pcs 9g servos
      • ,
    • Brushless motor 2632 out runner KV4100
      • ,
    • 45A ESC 5A UBEC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Thrust vectoring
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64 mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This fighter is one of the classics, the F-16 is ...

    Read more

    NitroTek

    CESSNA 182 RED RC PLANE PNP VERSION

  • Length
    		• 1030mm
  • Flight weight
    		• 930g
  • Wingspan
    		• 1410mm
  • Wing load
    		• 34g/dm2

      ,
    • 4pcs 9G servos
      • ,
    • Out-runner Brushless motor, KV900
      • ,
    • 30A ESC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • , ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This is a large scale model of the Cessna 182 ...

    Read more

    R2Hobbies

    1/10 RC GP 4WD .15 ENGINE RTR OFF-ROAD RACING MONSTER TRUCK BUGGY

    Length400 mm
    Width245mm
    Wheelbase270 mm
    Track (F/R)245mm
    Tyres size (F/R)88 mm
    Low speed Gear Ratio5.78
    High-speed Gear Ratio8.24
    Weight2000 g
    Engine15 CXP
    Package Weight~4980g
    1:10 RC GP .15 Engine 4WD RTR Racing Truck Model ...

    Read more

    NitroTek

    CONDOR NITRO RADIO CONTROLLED BUGGY

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 8.35
  • Engine
    		• Team Infinity .18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro radio controlled car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity powerful .18 pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals
      • ,
    ,

    If you want to race off road and on road ...

    Read more

    NitroTek

    CONQUISTADOR NITRO RC MONSTER TRUCK

  • Width
    		• 330MM
  • Height
    		• 165MM
  • Track
    		• 267MM
  • Length
    		• 390MM
  • Wheel base
    		• 280MM
  • Gear ratio
    		• 10.44
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 108*56MM
  • Ground clearance (F/R)
    		• 38MM/46MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Oil-filled Alluminium shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    Unstoppable power allows this off road truck to go where ...

    Read more

    NitroTek

    CONDOR PRO NITRO RADIO CONTROL BUGGY

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 5.69
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Aluminium oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • Anti-roll bars pre-fitted
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

     

    ,

    If you want to race off road and on road ...

    Read more

    NitroTek

    CONQUISTADOR SPECIAL EDITION NITRO RC TRUCKS

    standard Conquistador and ..." />

  • Width
    		• 330MM
  • Height
    		• 165MM
  • Track
    		• 267MM
  • Length
    		• 390MM
  • Wheel base
    		• 280MM
  • Gear ratio
    		• 10.44
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 108*56MM
  • Ground clearance (F/R)
    		• 38MM/46MM

      ,
    , ,
      ,
    • Fully Upgraded Special Edition!
      • ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Oil-filled Alluminium shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    We have taken a standard Conquistador and ...

    Read more

    NitroTek

    CONDOR PRO SPECIAL EDITION NITRO BUGGY

    standard Condor Pro ..." />

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 5.69
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • Fully Upgraded Special Edition!
      • ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Aluminium oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • Anti-roll bars pre-fitted
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    We have taken a standard Condor Pro ...

    Read more

    NitroTek

    CYCLONE PRO NITRO RADIO CONTROL CARS

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 5.69
  • Engine
    		• New Team Infinity 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity .18 pull start engine
      • ,
    • Aluminium adjustable oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    Our quickest model, the Cyclone PRO is for the serious ...

    Read more

    NitroTek

    CYCLONE NITRO REMOTE CONTROLLED CARS

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 8.35
  • Engine
    		• New Powerful Team Infinty 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Japanese high quality pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Powerful .18 engine
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    For all the speed junkies! The Cyclone is our quickest ...

    Read more

    NitroTek

    COPTERX SE V2 PRO RC HELICOPTER - KIT VERSION

  • Length
    		• 650mm
  • Height
    		• 230mm
  • Main Rotor
    		• 700mm
  • Tail Rotor
    		• 150mm
  • Motor Gear
    		• 13T/11T
  • Main Gear
    		• 150T
  • Autorotation Tail Drive Gear
    		• 106T
  • Tail Drive Gear
    		• 25T
  • Weight(without power system)
    		• 354g
  • Weight(including power system)
    		• 690g

      ,
    • Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
      • ,
    , ,
      ,
    • CNC & Carbon Construction
      • ,
    • Auto-Rotation System
      • ,
    • Rear Tail Servo Mount
      • ,
    • Collective Pitch System
      • ,
    • Tail Rotor Drive Belt System
      • ,
    • Main Drive Gear with Cooling Fan
      • ,
    • Professional Servo Control Lever Design
      • ,
    ,

    The CopterX CX 450 V2 Superior Edition (eCCPM) represents the ...

    Read more

    NitroTek

    COPTERX ME V2 PRO RC HELICOPTER - KIT VERSION

  • Length
    		• 650mm
  • Height
    		• 230mm
  • Main Rotor
    		• 700mm
  • Motor Gear
    		• 13T/11T
  • Main Gear
    		• 150T
  • Autorotation Tail Drive Gear
    		• 106T
  • Tail Drive Gear
    		• 25T
  • Weight(without power system)
    		• 254g
  • Weight(including power system)
    		• 590g

      ,
    • Tail Rotor150mm
      • ,
    • Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
      • ,
    , ,
      ,
    • Aluminium frame and tail boom
      • ,
    • Auto-Rotation System
      • ,
    • Rear Tail Servo Mount
      • ,
    • Collective Pitch System
      • ,
    • Tail Rotor Drive Belt System
      • ,
    • Main Drive Gear with Cooling Fan
      • ,
    • Professional Servo Control Lever Design
      • ,
    ,

    The ME rc helcopter version is lower priced than the ...

    Read more

    Follow us on

    Twitter Facebook f Linkedin in Google plus g
    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby