NitroTek
CONQUISTADOR NITRO RC MONSTER TRUCK
| 330MM | |
| 165MM | |
| 267MM | |
| 390MM | |
| 280MM | |
| 10.44 | |
| Team Infinity 18 | |
| 108*56MM | |
| 38MM/46MM |
- ,
- ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Infinity 18 size pull start engine ,
- Oil-filled Alluminium shocks ,
- Single speed gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
Unstoppable power allows this off road truck to go where ...
NitroTek
CONDOR PRO NITRO RADIO CONTROL BUGGY
| 267MM | |
| 155MM | |
| 240MM | |
| 430MM | |
| 280MM | |
| 5.69 | |
| Team Infinity 18 | |
| 88*34MM(FRONT); 88*41MM(REAR) | |
| 27MM |
- ,
- ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Fully ball raced system ,
- Infinity 18 size pull start engine ,
- Aluminium oil-filled shocks ,
- Two speed automatic gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- Anti-roll bars pre-fitted ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
, If you want to race off road and on road ...
NitroTek
CONQUISTADOR SPECIAL EDITION NITRO RC TRUCKS
standard Conquistador and ..." />
| 330MM | |
| 165MM | |
| 267MM | |
| 390MM | |
| 280MM | |
| 10.44 | |
| Team Infinity 18 | |
| 108*56MM | |
| 38MM/46MM |
- ,
- ,
- Fully Upgraded Special Edition! ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Infinity 18 size pull start engine ,
- Oil-filled Alluminium shocks ,
- Single speed gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
We have taken a standard Conquistador and ...
NitroTek
CONDOR PRO SPECIAL EDITION NITRO BUGGY
standard Condor Pro ..." />
| 267MM | |
| 155MM | |
| 240MM | |
| 430MM | |
| 280MM | |
| 5.69 | |
| Team Infinity 18 | |
| 88*34MM(FRONT); 88*41MM(REAR) | |
| 27MM |
- ,
- ,
- Fully Upgraded Special Edition! ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Fully ball raced system ,
- Infinity 18 size pull start engine ,
- Aluminium oil-filled shocks ,
- Two speed automatic gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- Anti-roll bars pre-fitted ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
We have taken a standard Condor Pro ...
NitroTek
CYCLONE PRO NITRO RADIO CONTROL CARS
| 199MM | |
| 115MM | |
| 185MM | |
| 380MM | |
| 259MM | |
| 5.69 | |
| New Team Infinity 18 | |
| 64*26MM | |
| 8.5MM |
- ,
- ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Fully ball raced system ,
- Infinity .18 pull start engine ,
- Aluminium adjustable oil-filled shocks ,
- Two speed automatic gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
NitroTek
CYCLONE NITRO REMOTE CONTROLLED CARS
| 199MM | |
| 115MM | |
| 185MM | |
| 380MM | |
| 259MM | |
| 8.35 | |
| New Powerful Team Infinty 18 | |
| 64*26MM | |
| 8.5MM |
- ,
- ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Japanese high quality pull start engine ,
- Oil-filled shocks ,
- Single speed gear box ,
- Powerful .18 engine ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
For all the speed junkies! The Cyclone is our quickest ...
HobbyKing
HOBBYKING DONKEY ST380L-4200KV BRUSHLESS INRUNNER CAR MOTOR (11T)
| RPM/v | 4200kv (11T) |
| Dimensions | 27.6mm x 46mm |
| Shaft | 3mm |
| Voltage | 7.4v~11.1v |
| Weight | 142g |
| No-load current | 2.6A @ 7.4v |
| Max Current | 33A |
| Max Watts | 360W |
Specs:,
When pulling power matters and looks.. well.. just dont, then ...5 Reviews
HobbyKing
HOBBYKING DONKEY ST380L-3600KV BRUSHLESS INRUNNER CAR MOTOR (13.5T)
| RPM/v | 3600kv (13.5T) |
| Dimensions | 27.6mm x 46mm |
| Shaft | 3mm |
| Voltage | 7.4v~11.1v |
| Weight | 140g |
| No-load current | 1.5A @ 7.4v |
| Max Current | 30A |
| Max Watts | 300W |
Specs:,
When pulling power matters and looks.. well.. just dont, then ...HobbyKing
HOBBYKING DONKEY ST380L-3000KV BRUSHLESS INRUNNER CAR MOTOR (15T)
| RPM/v | 3000kv (15T) |
| Dimensions | 27.6mm x 46mm |
| Shaft | 3mm |
| Voltage | 7.4v~11.1v |
| Weight | 138g |
| No-load current | 1.4A @ 7.4v |
| Max Current | 25A |
| Max Watts | 260W |
Specs:,
When pulling power matters and looks.. well.. just dont, then ...3 Reviews
HobbyKing
1/10 CARLSSON C25 CARBON FIBER STYLE CAR BODY SHELL (190MM)
| Length | 460mm |
| Width | 196mm |
| Wheelbase | 260mm |
Note:, Body shell requires finishing such as cutting out of the wheel wells and applying decals., Specs:, Fits:, 190mm 1/10 class on-road car,
This is a high quality "carbon fiber style" polycarbonate body ...HobbyKing
1/10 VIPER SRT10 CARBON FIBER STYLE CAR BODY SHELL (190MM)
| Length | 470mm |
| Max Body Width | 205mm |
| Wheelbase | 260mm |
Note:, Body shell requires finishing such as cutting out of the wheel wells and applying decals., Specs:, Fits:, 190mm 1/10 class on-road car,
This is a high quality "carbon fiber style" polycarbonate body ...HobbyKing
1/10 MUSTANG GT350 CARBON FIBER STYLE CAR BODY SHELL (190MM)
| Length | 470mm |
| Width | 205mm |
| Wheelbase | 260mm |
Note:, Body shell requires finishing such as cutting out of the wheel wells and applying decals. Please see last photo for reference., Specs:, Fits:, 190mm 1/10 class on-road car,
This is a high quality "carbon fiber style" polycarbonate body ...5 Reviews
HobbyKing
1/10 S15 CARBON FIBER STYLE CAR BODY SHELL (190MM)
| Length | 440mm |
| Max Width | 193mm |
| Wheelbase | 260mm |
Note:, Body shell requires finishing such as cutting out of the wheel wells and applying decals., Specs:, Fits:, 190mm 1/10 class on-road car,
This is a high quality "carbon fiber style" polycarbonate body ...5 Reviews
HobbyKing
1/10 S15 CAR BODY SHELL W/PRE-PRINTED GRAPHICS (190MM) - RED VERSION
| Length | 440mm |
| Width | 193mm |
| Wheelbase | 260mm |
Note:, Body shell requires finishing such as cutting out of the wheel wells, applying decals and painting final base color., Specs:, Fits:, 190mm 1/10 class on-road car, Note:, This listing is for the red graphics version of body shell only. You will only recieve 1 x red graphics version body shell w/accessories in your order. The photo shows red and blue graphics versions just for reference purposes only.,
This is a high quality polycarbonate body shell for 1/10 ...HobbyKing
1/10 Z4 CARBON FIBER STYLE CAR BODY SHELL (190MM)
| Length | 442mm |
| Max Width | 185mm |
| Wheelbase | 260mm (hub to hub) |
Note:, Body shell requires finishing such as cutting out of the wheel wells and applying decals., Specs:, Fits:, 190mm 1/10 class on-road car,
This is a high quality "carbon fiber style" polycarbonate body ...5 Reviews