HiModel
2.4G CORONA DSSS 14-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT14F, RX CR14)
| Type | CT14F DSSS |
| Size | 54X30X25MM |
| Weight | 27g |
| Operating voltage | 5V (Futaba) |
| Operating current | 150mA |
| Compatible with | FUTABA |
| Type | CR14 DSSS |
| Size | 37.5X52.5X16MM |
| Weight | 21g |
| Range | >1500M |
| Sensitivity | -100dbm |
| Operating voltage | 4.8V-6V |
| Operating current | 40mA |
| Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , RF Module Specs:, Output Power: , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...6 Reviews
HiModel
CORONA 8-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER R8FA
CORONA 2.4G Spread Spectrum FASST compatible receiver is ..." />
| Operating voltage range | 4 - 10V |
| Operating current | 70mA @ FASST 7ch mode normal and 110mA max. |
| Latency | 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode |
| Sensitivity | about -96dBm |
, , , , , , Specifications:, , , , , , , , , , , 80mA @ FASST multi-channel mode normal and 110mA max., 8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode, channel number: 8, , ,
Features: Compatibility: CORONA 2.4G Spread Spectrum FASST compatible receiver is ...HiModel
CORONA 6-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER R6FA
CORONA 2.4G Spread Spectrum FASST compatible receiver is ..." />
| Type | R6FA |
| Operating voltage range | 4 - 10V |
| Operating current | 70mA @ FASST 7ch mode normal and 110mA max. |
| Latency | 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode |
| Sensitivity | about -96dBm |
, , , , , , Specifications:, , , , , , , , , , , 80mA @ FASST multi-channel mode normal and 110mA max., 8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode, channel number: 8, , ,
Features: Compatibility: CORONA 2.4G Spread Spectrum FASST compatible receiver is ...HiModel
CORONA 4-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER R4FA
CORONA 2.4G Spread Spectrum FASST compatible receiver is ..." />
| Type | R4FA |
| Operating voltage range | 4 - 10V |
| Operating current | 70mA @ FASST 7ch mode normal and 110mA max. |
| Latency | 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode |
| Sensitivity | about -96dBm |
, , , , , , Specifications:, , , , , , , , , , , 80mA @ FASST multi-channel mode normal and 110mA max., 8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode, channel number: 4, , ,
Features: Compatibility: CORONA 2.4G Spread Spectrum FASST compatible receiver is ...HiModel
CORONA 4-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R4FA-SB
CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ..." />
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HiModel
CORONA 6-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R6FA-SB
CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ..." />
| Type | R6FA-SB |
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, channel number: 6, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HiModel
CORONA 2.4GHZ DIY DSSS TRANSMITTING MODULE AND RECEIVER CT8Z/CR8D
Corona 2.4GHz DIY transmitting module and receiver ..." />
| Type | CT8Z DSSS |
| Size | 38.5*21.8*6.5mm |
| Operating voltage | 8V-13V |
, , , , , , Specifications:, , , , , , , , , , , Weight: 5g, Operating current: , Output Power:, ,
Features: Features of Corona 2.4GHz DIY transmitting module and receiver ...3 Reviews
HobbyKing
CORONA 8CH DUAL CONV. RX 35MHZ (INCL. 10 RX CRYSTAL)
| Size | 36.8*22*8.3mm |
| Weight | 8.6g(with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | positive or negative (auto-detect) |
| Modulate | FM/PPM(pulse position modulation) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
5 Reviews
HobbyKing
CORONA 8CH SINGLE CONV. RX 72MHZ (INCL. 10 RX CRYSTALS)
| Size | 36*22*12mm |
| Weight | 7.3g (with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse position modulation) |
5 Reviews
HobbyKing
CORONA 4CH SINGLE CONV. RX 72MHZ (INCL. 10 RX CRYSTAL)
| Size | 28.5*15*7.4mm |
| Weight | 4.7g(without shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-4 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dua 4 pole ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse positionmodulation) |
5 Reviews
HobbyKing
CORONA 8CH SINGLE CONV. RX 35MHZ (INCL. 10 RX CRYSTAL)
| Size | 36*22*12mm |
| Weight | 7.3g (with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse position modulation) |
5 Reviews
HobbyKing
CORONA 8CH SINGLE CONV. RX 40MHZ (INCL. 10 RX CRYSTAL)
| Size | 36*22*12mm |
| Weight | 7.3g (with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse position modulation) |
5 Reviews
HobbyKing
CORONA 8CH DUAL CONV. RX 72MHZ (INCL. 10 RX CRYSTAL)
| Size | 36.8*22*8.3mm |
| Weight | 8.6g(with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | positive or negative (auto-detect) |
| Modulate | FM/PPM(pulse position modulation) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
5 Reviews
HobbyKing
CORONA 4CH SINGLE CONV. RX 40MHZ (INCL 10 RX CRYSTAL)
| Size | 28.5*15*7.4mm |
| Weight | 4.7g(without shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-4 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dua 4 pole ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse positionmodulation) |
5 Reviews
HobbyKing
CORONA 8CH SINGLE CONV. RX 35MHZ (WITHOUT CRYSTAL)
| Size | 36*22*12mm |
| Weight | 7.3g (with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ±8kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse position modulation) |
5 Reviews