ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - WHITE
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - BLACK
GoPro-housing offers a perfect protection of your GoPro against ..." />
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - WHITE
GoPro-housing offers a perfect protection of your GoPro against ..." />
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
GOPRO HEAD STRAP + QUICKCLIP
| Warranty | 1 Year |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
Includes a Head Strap and a QuickClip for a variety ...ReadyMadeRC
GOPRO FLOATY BACKDOOR
GoPro afloat. This easy-to-spot flotation ..." />
| Compatibility | HERO4, HERO3+, HERO3, HERO, HD HERO2, Original HD HERO |
| Compatibility | All Cameras |
Included Items:, , Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,
This easy-to-spot flotation keeps your GoPro afloat. This easy-to-spot flotation ...ReadyMadeRC
TAROT 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+ W/FREE CABLE
| 7. Supported receiver type | conventional/S-BUS/DSM2/DSMJ/DSMX receiver. |
| 8. Supported RC | PPM/PCM/2.4G. |
| 9. Operating supply | DC 7.4V~14.8V (Li-Po 3S is recommended) |
| 10. Operating current | 200mA-500mA (Depending on power supply voltage and motor power) |
| 11. Operating temperature | -15ºC~65ºC. |
| 12. CPU | Double 32bit ARM |
| 13. Sensor technology | 3-axis MEMS gyro and accelerometer. |
| 14. Max angular rate | 2000 º /sec. |
| 15. Max acceleration | 16g. |
| 16. Control frequency | 2000Hz |
| 17. Motor driver frequency | 20KHz (quiet and smooth) |
| 18. Control accuracy | 0.1° |
| 19. Control range | -45º~45º(roll), -135 º~90 º(tilt). |
| 20. Attitude arithmetic | BLDC gimbal dedicated brushless motor decoupled EKF algorithm. |
| 21. Aerial photography equipment | GOPRO Hero3. |
Note:, Modifications may be required to use HERO4, Parts included for the kit: 2 motors mounted onto the swing arms, gimbal controller board, mounting bracket with GoPro brace, 2 male to male servo cables (one with Y end), USB firmware updater connector and cable, 4 rubber dampeners and mounting bracket + hardware for the gimbal.,
FREE LIVE VIDEO OUT CABLE OPTION...YES, OUR CABLES WILL WORK ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - CARBON FIBER
GoPro-housing offers a perfect protection of your GoPro against ..." />
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
GOPRO SPORTSMAN MOUNT
GoPro to guns, fishing rods and bows. Mount ..." />
| Compatibility | All GoPro cameras |
Restrictions:,
Mount your GoPro to guns, fishing rods and bows. Mount ...ReadyMadeRC
GOPRO - THE TOOL (THUMB SCREW WRENCH + BOTTLE OPENER)
GoPro thumb screws more securely than by hand ..." />
| GoPro thumb screw wrench that doubles as a bottle opener. Compatibility | All GoPro cameras |
The Tool makes it easy to tighten your GoPro thumb screws to prevent the camera from shifting during high-speed, high-vibration activities. Whether you’re headed surfing, skydiving or off-road racing, The Tool delivers the extra torque you need to get your thumb screws tighter than you can by hand. It’s perfect when mounting the camera using multiple extension arms, or adjusting thumb screws in cold conditions with numb fingers. Added bonus: The Tool doubles as a bottle opener, so you can use it to crack a cold one back in the parking lot., Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,
Tighten your GoPro thumb screws more securely than by hand ...ReadyMadeRC
GOPRO BATTERY BACPAC 3.0
| Removable battery pack that attaches to your GoPro to extend battery life. Compatibility | HERO4, HERO3+, HERO3 |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
The Battery BacPac is a removable battery pack that seamlessly ...ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - BLACK
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
GOPRO LCD TOUCH BACPAC 3.0
| Removable touch display for your GoPro. Compatibility | HERO4, HERO3+, HERO3 |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
The LCD Touch BacPac™ is a removable touch display that ...ReadyMadeRC
GOPRO WI-FI REMOTE 2.0
GoPro remotely from distances of up to 600’ ..." />
| Long-range remote control for your GoPro. Compatibility | HERO4, HERO3+, HERO3 |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
Control your GoPro remotely from distances of up to 600’ ...ReadyMadeRC
GOPRO BLACKOUT HOUSING
| Features a matte black finish for low-profile shooting. Waterproof to 131’ (40m). Compatibility | HERO4, HERO3+, HERO3 |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
The Blackout Housing keeps a low profile thanks to its ...ReadyMadeRC
GOPRO STANDARD HOUSING (131' / 40M)
| Slim, lightweight housing for your GoPro camera. Waterproof to 131’ (40m). Compatibility | HERO4, HERO3+, HERO3 |