Hobby-Lobby
PILOT PROFICIENCY KIT (DX6I WITH TWO AR400 AND PHOENIX 4)
| All types | sport, scale, heli, scale, gliders, jets and more |
Key Features:, 2 Bonus AR400 Spektrum Receivers Included FREE!,
Everything you need to become a pro pilot The Phoenix ...Hobby-Lobby
PILOT-1 WACO YKS-6 1/4 SCALE ARF (OVERSIZE)
Our airplane has a 100” wingspan and is 74” long with a 2496 sq. in. wing area (that’s over 17 sq. ft. of wing area). At 20-22 lbs. flying weight, it has a low wing loading typical of a Waco. We included lots of scale detail to bring the model to life: corrugated ailerons, working doors, scale aluminum wheel hubs, airfoiled aluminum wing struts, scale rib spacing and scale outline and colors., *Note:, The two HUGE boxes that this product comes in makes it an Oversize Shipment that has to be delivered by Truck Freight. The additional shipping charge is $250.00. This product is NOT available for shipment outside of the United States and Canada., Technical Specifications:, Length:, 74", Wingspan:, 100", Flying Weight:, 20 - 22 lbs., Controls:, Ailerons, Elevator, Rudder, Throttle, Wing Area:, 2496 sq. in.,
Big scale Golden Age biplane WACO (Weaver Aircraft Company) of ...Hobby-Lobby
PILOT-1 27% SCALE STINSON 108 ARF, RED/CREAM (OVERSIZE)
The big Stinson's handling both on the ground and in the air is a total joy, very easy to fly and responsive. For those who want a big elegant airplane that will bring a smile to your face each time you fly, the Stinson is your choice. For 6-channel radio (minimum): Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and Throttle.,
Classic scale RC model for gas or electric power 108-1/2" ...Hobby-Lobby
PILOT-1 WEDELL-WILLIAMS 1/8 SCALE ARF
While not suitable for the novice, the Model 44 is an easy rc plane to fly. Anyone with some aileron airplane experience should not have any problems flying this airplane. Our recommended power system provides plenty of power for quick take-offs and powerful climbouts. All regular aerobatic maneuvers are easily performed with this airplane. Its light wing loading makes it easy to slow down for landing. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle., Technical Specifications:, Length:, 31", Wingspan:, 40", Flying Weight:, 35 oz., Controls:, Ailerons (2 servos), Elevator, Rudder, Throttle, Wing Area:, 325 sq. in.,
Golden Age Racer that's fun to fly In the late ...Hobby-Lobby
PILOT-1 27% SCALE STINSON 108 ARF, RED/CREAM (OVERSIZE)
The big Stinson's handling both on the ground and in the air is a total joy, very easy to fly and responsive. For those who want a big elegant airplane that will bring a smile to your face each time you fly, the Stinson is your choice. For 6-channel radio (minimum): Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and Throttle.,
Classic scale RC model for gas or electric power 108-1/2" ...Hobby-Lobby
PILOT-1 WEDELL-WILLIAMS 1/8 SCALE ARF
While not suitable for the novice, the Model 44 is an easy rc plane to fly. Anyone with some aileron airplane experience should not have any problems flying this airplane. Our recommended power system provides plenty of power for quick take-offs and powerful climbouts. All regular aerobatic maneuvers are easily performed with this airplane. Its light wing loading makes it easy to slow down for landing. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle., Technical Specifications:, Length:, 31", Wingspan:, 40", Flying Weight:, 35 oz., Controls:, Ailerons (2 servos), Elevator, Rudder, Throttle, Wing Area:, 325 sq. in.,
Golden Age Racer that's fun to fly In the late ...RCPlanet
HOBBICO DECAL SET SKY PILOT RC HCAA3522
, ,
Hobbico decal set is pre-cut for easy peel and stick ...ReadyMadeRC
MINI BUBBLE LEVEL FOR MULTI ROTOR AND AUTO PILOT SETUP
,
Mini Bubble Level for Multirotors! This takes the guess work ...ReadyMadeRC
SKY SURFER RTF BRUSHLESS (1.4M)
| Wingspan | 1372mm (54 inch) |
| Length | 915mm (36 inch) |
| Flying Weight | 624g (22 oz) |
| Drive System | 2620 Brushless |
| Speed Controller | 20A |
| *NOTE | Current version uses bullet type connectors and not deans/t-connector types |
| Battery | 11.1V 1300mAh Li-Po (basic charger included) |
| *NOTE | Current version uses bullet type connectors and not deans/t-connector types |
| Control system | 4 CH 2.4GHz |
| Radio Control Range | 3000 |
*Note: There are people looking at what they are calling "version 1" and "version 2" of this plane. They really aren't version 1 or 2, but they are just different versions of this plane. Mine are what people are calling version 1, just as the pictures show. This is MUCH better for FPV since there is a ton of space inside the fuselage. The "version 2" planes ruined the usefulness for FPV by putting the servos and control arms inside the fuselage. The tubes for the control arms add strength to the fuselage in this version. My store is focused on FPV, so the equipment I carry will be what is best for FPV!, *Not to be distributed or linked to by other companies who like to take other people's work. You know who you are... :), Servos:, 4X 9g high speed micro, Requires:, , Note for beginner pilots: Although this plane is super easy to fly, it's a good idea to find local flying help from an experienced pilot. This can help with the small amount of assembly that is required and with the first flights. It's difficult to give support remotely when someone is totally new to the hobby, so the local help and help from,
RTF with pre-installed servos, brushless motor , ESC, and 2.4GHz ...DPCAV
GUARDIAN 2D/3D INERTIAL STABILIZER (STANDALONE MODEL)
| Instruction Manual | Click Me! |
| PC Software | Click Me! |
Q: Why do I need the Guardian?, The Guardian helps both beginner and expert pilots fly with confidence, and provides two key modes of operation: In 2D flight mode, the Guardian provides much smoother flight and wing leveling stabilization for your model, which makes it a lot easier to adjust and fly your plane. The Guardian "remembers" level flight for your model and returns it to level flight when needed, as well as providing precise "fly by wire" control., The Guardian has two submodes for 3D flying: In 3D Heading Lock submode, simply center your sticks to have the Guardian lock onto your present attitude (pitch, roll, and heading), which can make it easier to perform stunts like prop hanging, inverted flight, knife edges, low speed harriers, etc. In 3D Gyro submode, the Guardian uses its built-in 3 axis gyro to increase your model’s stability, while leaving you in full control. In this mode the Guardian greatly reduces the effects of gusts, turbulence, motor torque and other factors, and can expand the maneuverability of your model in a variety of conditions., Q: I Fly FPV. Is the Guardian for me?, Q: Will the Guardian work with my model?, Q: How do I install the Guardian?, Q: How do I configure the Guardian?, Q: How does the Guardian work?, Q: What sets the Guardian apart from other Stabilization systems out there?, *Note: Using the PC software will require a common Micro-USB cable. Most likely you already have one of these, but it not then they are available from your local electronic/computer store.,
Based on Eagle Tree's proven inertial stabilization technology, the Guardian ...HobbyWireless
SPY HAWK COMPLETE READY TO FLY FPV AIRPLANE MODE 1 & 2 (AIRPLANE, RADIO CONTROL, CAMERA, TRANSMITTER, RECEIVER, DISPLAY AND RECORDER)
| Live video distance | 1/2 kilometers (about 1500’ feet) |
| Memory Card | Micro SDHC 4GB (Included) |
| Wing Span | 843mm |
| Overall Length | 617mm |
| Flying Weight | 180g |
| Flying time | around 20-30 minutes |
| Remote Control | 2.4 GHz 4 Channels (Included) |
| FPV Video and Audio | 5.8 GHz System (Included) |
| Motor | C1404 Brushless KV3000 (Included) |
| Battery | 7.4V 450 mAh (Included) |
| ESC | 6A (Included) |
Details:, The SkyHawk was designed to simplify and bring enjoyment to the FPV experience to beginners and advanced pilots., Airplane features:,
It’s built with crash-proof material (EPO), making it an almost ...Flying-Hobby
FULLSIZE SILVERLINE V-BAR V 5.3 FLYBARLESS STABILIZATION SYSTEM
| Features | Auto-Learn Function |
| Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
| http | //www.vstabi.info/en |
| http | //www.mikado-heli.com.hk/ |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (V-Bar). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Highlights:, Digital flight performance - like a simulator, Contents:, Full Size Silverline V-Bar, Important Information:, Support site:, Version 5.3 Pro software is available for purchase and download here:,
MIK4608 Fullsize Silverline V-Bar V 5.3 Flybarless Stabilization System The ...Flying-Hobby
MIKADO VBAR "BLUELINE" 5.2 EXPRESS
| Contents | • Full Size V-Bar |
| • Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (“V-Bar”). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Features:, • Auto-Learn Function, Highlights:, • Digital flight performance - like a simulator,
• Preset parameters for many common helicopters • Programming via ...Flying-Hobby
CRANKSHAFT LOCKING TOOL: 30-90 HELIS - BLACK
Features:, Made of durable engineering plastic, it locks the crankshaft without risk of damage to any part of the engine., Requires:, Removing coverplate or pull starter from the rear of the engine., Instructions:, Remove the crankcase rear coverplate from the engine and rotate the crankshaft to the bottom-dead-center position. Insert the crankshaft clamp so that its grooved portion surrounds the crankpin and lower end of the connecting-rod, and securely tighten the flywheel, fan or pilot shaft onto the crankshaft. Remove crankshaft clamp when completed and re-install the coverplate back onto the engine.,
This device facilitates the installation or removal of a flywheel, ...Flying-Hobby
ROTORTECH 560MM 3D CF BLADES (YELLOW TIP)
| Length | 560mm |
| Width | 53mm |
| Grip | >12mm |
| Hole | 3-4mm |
| Airfoil | Symmetrical |
| Tip | Aeroflat |
| Make | Carbon Fiber |
| Common Application | 30 Size RC Helicopters. Designed for hard 3D competition. |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
These 560mm carbon fiber main rotor blades are designed for ...