ReadyMadeRC
MINI BUBBLE LEVEL FOR MULTI ROTOR AND AUTO PILOT SETUP
,
Mini Bubble Level for Multirotors! This takes the guess work ...ReadyMadeRC
SKY SURFER RTF BRUSHLESS (1.4M)
Wingspan | 1372mm (54 inch) |
Length | 915mm (36 inch) |
Flying Weight | 624g (22 oz) |
Drive System | 2620 Brushless |
Speed Controller | 20A |
*NOTE | Current version uses bullet type connectors and not deans/t-connector types |
Battery | 11.1V 1300mAh Li-Po (basic charger included) |
*NOTE | Current version uses bullet type connectors and not deans/t-connector types |
Control system | 4 CH 2.4GHz |
Radio Control Range | 3000 |
*Note: There are people looking at what they are calling "version 1" and "version 2" of this plane. They really aren't version 1 or 2, but they are just different versions of this plane. Mine are what people are calling version 1, just as the pictures show. This is MUCH better for FPV since there is a ton of space inside the fuselage. The "version 2" planes ruined the usefulness for FPV by putting the servos and control arms inside the fuselage. The tubes for the control arms add strength to the fuselage in this version. My store is focused on FPV, so the equipment I carry will be what is best for FPV!, *Not to be distributed or linked to by other companies who like to take other people's work. You know who you are... :), Servos:, 4X 9g high speed micro, Requires:, , Note for beginner pilots: Although this plane is super easy to fly, it's a good idea to find local flying help from an experienced pilot. This can help with the small amount of assembly that is required and with the first flights. It's difficult to give support remotely when someone is totally new to the hobby, so the local help and help from,
RTF with pre-installed servos, brushless motor , ESC, and 2.4GHz ...ReadyMadeRC
DJI A2 FLIGHT CONTROLLER SYSTEM AND DJI OSD MKII COMBO
PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System and qty 1 DJI iOSD MkII. |
The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest ,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
DJI A2 MULTI-ROTOR STABILIZATION CONTROLLER
PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System, does not include iOSD. |
The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest w,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH - WHITE
The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH/MANTA - BLACK
The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 30 - WHITE
The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 30 - BLACK
The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS
ATTENTION | According to |
Wingspan | 2520MM/ 99.2inch |
Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
Customized Motor for Airtitan | M60K/ Power 1500W |
Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
Propeller recommend | 15*6 / 15*7 |
ESC | Advanced 80A OPTO (without Built-in BEC) |
External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
Material of fuselage and Wing | EPO |
RMRC 6s batteries found here | 10,000 mAh |
Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS
ATTENTION | According to |
Wingspan | 2520MM/ 99.2inch |
Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
Customized Motor for Airtitan | M60K/ Power 1500W |
Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
Propeller recommend | 15*6 / 15*7 |
ESC | Advanced 80A OPTO (without Built-in BEC) |
External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
Material of fuselage and Wing | EPO |
RMRC 6s batteries found here | 10,000 mAh |
Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH/MANTA - CARBON FIBER
The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
UMX RADIAN BNF
Wingspan | 28.7 in (730mm) |
Overall Length | 16.5 in (418mm) |
Flying Weight | 1.50 oz (43 g) |
Motor Size | 8.5mm coreless brushed motor |
Radio | 4+ channel transmitter required |
CG (center of gravity) | 1.22 in (31mm) back from the leading edge of wing at wing root |
Recommended Battery | 1S 3.7V 150mAh 25C LiPo |
Approx. Flying Duration | 8-10 minutes |
Charger | 1S 300mA LiPo USB Charger |
Minimum Age Recommendation | 14 years |
Experience Level | Intermediate |
Recommended Environment | Indoor/Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,
The first ultra micro motor glider with AS3X® technology. Features ...ReadyMadeRC
EZUHF COMBO STARTER PACKAGE - LITE
http | //fpvlab.com/forums/showthread....rade-procedure |
http | //www.youtube.com/watch?v=gk46N8RKd2c&feature=channel_video_title |
Includes:, , Video describing how to connect to a JR radio if you want to make your own cable:, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
This combo gets you all you need to have a ...ReadyMadeRC
EZUHF COMBO STARTER PACKAGE - DIVERSITY
http | //fpvlab.com/forums/showthread....rade-procedure |
http | //www.youtube.com/watch?v=gk46N8RKd2c&feature=channel_video_title |
Includes:, , Video describing how to connect to a JR radio if you want to make your own cable:, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
This combo gets you all you need to have a ...ReadyMadeRC
EZUHF 8 CHANNEL DIVERSITY RECEIVER
EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters | -RSSI Ant 1, Ant 2 |
http | //fpvlab.com/forums/showthread....rade-procedure |
http | //fpvlab.com/forums/showthread....r-installation |
http | //fpvlab.com/forums/showthread....bind-procedure |