Hobby-Lobby
ULTRACOTE FLAME RED
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Flame Red Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE SKY BLUE
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Sky Blue Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE BLACK
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Black Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
ULTRACOTE DEEP BLUE
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Deep Blue Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE MIDNIGHT BLUE
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Midnight Blue Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE CUB YELLOW
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Cub Yellow Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE SILVER
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Silver Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
ULTRACOTE CREAM
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Cream Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
ULTRACOTE BRIGHT YELLOW
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Bright Yellow Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE WHITE
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote White Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
ULTRACOTE TRUE RED
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote True Red Hangar 9 UltraCote is a high tech ...Hobby-Lobby
PARK 370 BL OUTRUNNER,1200KV WITH 4MM HOLLOW SHAFT
| Tech Notes | Maximum operating temperature |
| Size | Park 370 |
| Bearings or Bushings | One 4 x 8 x 4mm Bearing, and One 4 x 9 x 4mm Bearing |
| Recommended Prop Range | 8x3.8-10x4.7 or Variable Pitch systems |
| Voltage | 7.2-12V |
| RPM/Volt (Kv) | 1200 |
| Resistance (Ri) | .18 ohms |
| Idle Current (Io) | .60A |
| Continuous Current | 10A |
| Maximum Burst Current | 12A (15 sec) |
| Cells | 6-10 Ni-MH/Ni-Cd or 2-3S Li-Po |
| Speed Control | 12-20A Brushless |
| Weight | 45 g (1.6 oz) |
| Overall Diameter | 28mm (1.10 in) |
| Shaft Diameter | 4mm (.16 in) hollow |
| Overall Length | 25mm (1.00 in) |
,
Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft E-flite's latest ...Hobby-Lobby
SUMMIT 4WD RTR WITH 2.4GHZ 4-CHANNEL RADIO SYSTEM
| Technical Specifications | Summit 4WD RTR with 2.4GHz 4-Channel Radio System Specs |
| Chassis | Molded Tub/Composite Nylon |
| Completion Level | Ready-To-Run |
| Drivetrain | 4WD |
| Experience Level | Intermediate |
| Gear Pitch | 32-Pitch |
| Length | 22.17 inches (563mm) |
| Motor or Engine | Titan® 775 High-Torque |
| Radio | 4 channel |
| Recommended Environment | Off-Road |
| Servos | 125 oz.-in .16-second |
| Shock Type | High-Tech GTR Shocks |
| Size/Scale | 1/10 |
| Speed | 20+mph |
| Speed Control | EVX-2â„¢ Forward/Reverse/Brake |
| Suspension | Ultra-long-travel suspension |
| Tire Type | Canyon ATâ„¢ (7.1" x 3.8") |
| Type | 4WD Off-road |
| Vehicle Type | Monster Truck |
| Weight | 175oz (4.96kg) |
| Wheel Size | 3.8 inch |
| Wheelbase | 14.84 inches (377mm) |
| Width | 18.48 inches |
,
Monster truck innovation reaches a new high in the Traxxas ...Hobby-Lobby
SHOCKWAVE 36 RTR W/ T-DRIVE (OVERSIZE)
| Beam | 9 in. |
| Engine Size | .32 water-cooled Marine |
| Radio | 2 channels |
| Speed | 30 mph |
| Hull Material | Fiberglass |
| Hull Type | Deep-V |
| Trim Scheme Colors | White |
| Drive System | Flex shaft |
| Prop Size | 1.90 x 3.0 in |
| Exhaust | Tuned pipe |
Needed to complete: Fuel (quart), 500cc Fuel Bottle or Fast Tap Quart Bottle Spout, Glow Plug Wrench, 7.2v Battery and charger, Ni-Cd Glow Driver, 12 AA alkaline batteries (8 for the transmitter and 4 for the receiver), Clear tape to seal radio box Tech Notes: To increase speed on calm water, bend the trim tabs up 1/4 to 1/2 inch with a pair of pliers. This will lift the front of the hull out of the water at high speeds, lower hull resistance and increase speed. This may, however, lessen the cornering ability. The trim tabs can also be adjusted individually to level the boat and compensate for engine and propeller torque. You can also increase top speed by removing the anti-skid fins, but you may experience reduced stability in rough conditions. Technical Specifications: ShockWave 36 RTR w/T-Drive Specs:Length: 36 in., ,
The Shockwave 36 is a blazing fast Measuring over three ...Hobby-Lobby
ULTRACOTE GREEN
Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,
UltraCote Green Hangar 9 UltraCote is a high tech polyester ...