Hobby-Lobby
SPECTRA 2.4GHZ MODULE, OPTIMA 9 RECEIVER
| Basic Telemetry Function | RX Low Battery Warning |
Hobby-Lobby
SPECTRA 2.4GHZ MODULE, OPTIMA 7 RECEIVER
| Basic Telemetry Function | RX Low Battery Warning |
Hobby-Lobby
SPECTRA 2.4GHZ MODULE, OPTIMA 6 RECEIVER
| Basic Telemetry Function | RX Low Battery Warning |
Hobby-Lobby
AC/DC PRO CHARGER WITH POWER SUPPLY
| Technical Specifications | AC/DC Pro Charger with Power Supply - US Specs |
| Current Discharge | 0.1A-1.0A |
| Charge Rate | 0.1A-5.0A |
| Battery Type | NiCd, NiMH, Li-Ion, LiPo, LiFe, Lead-Acid |
| LCD | Yes |
| Length | 5.35 in (136mm) |
| Width | 3.54 in (90.0mm) |
| Height | 1.18 in (30.0mm) |
,
If you have been searching for just one RC battery ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR VERSION 3.0
,
Phoenix R/C Pro Simulator Version 3.0 Grab your transmitter and ...Hobby-Lobby
ANYLINK 2.4GHZ RADIO ADAPTER
INCLUDES:, Tactic AnyLink SLT 2.4GHz Radio Adapter,
ANYLINK 2.4GHZ RADIO ADAPTER Expands the ability to fly a ...Hobby-Lobby
ONYX 200 AC/DC SPORT PEAK CHARGER
| Stock Number | DTXP4200 |
| AC input | 110V AC 60Hz |
| DC input | 11-15V DC, built-in lead with alligator clips |
| Battery types | 4-7 NiCd or NiMH cells (4.8-8.4V) |
| Battery capacity range | 750-7500mAh |
| Fast charge current | 1.5A, 3A, 5A linear (40W maximum) |
| Fast charge termination | peak detection |
| Fast charge safety timer | 90 minutes |
| Peak sensitivity | 8mV |
| Auto-trickle current | 1/20 fast charge setting, rounded to 50mA (0-250mA) |
| Controls | pushbutton, slide-switch |
| LED indicators | 4 red, 1 green |
| Audible indicators | Indicates start, stop, errors |
| Output connections | built-in lead with standard connector* |
| Protective devices | solid-state reverse polarity and current overload |
| Case size | 5.74 x 4.60 x 1.61" (146 x 117 x 41 mm) |
| Weight | 17.0 oz. (484 g) |
Key Features:, A super-small, lightweight built-in AC power supply is great for cramped pit spaces, and easy portability.,
Onyx 200 AC/DC Sport Peak Charger The Onyx 200 is ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0 W/DX5E
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 w/DX5e When the rain clouds ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 When the rain clouds are ...Hobby-Lobby
DJI NAZA-M V2 W/GPS
| Features | All-in-one Design. |
| Motor Disarm | There are two modes of Motor Disarm |
What's new with the NAZAM V2 Hardware:, PMU V2 - New case design with CANBUS port. Enhanced BEC functionality, better heat dissipation. Extra CANBUS ports, enhances the expandability of the system and will support Gopro Zenmuse, iOSD and Bluetooth module for assistant software use on smart phones in the future, etc. NAZA V1 can also be upgraded using PMU V2 and support Gopro Zenmuse, iOSD and Bluetooth module., What's new with the NAZAM V2 Firmware and functions:, New attitude stabilization algorithm, provides better flight performance / maneuverability., It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.,
DJI NAZA-M V2 W/GPS New flight control performance, provides better ...